PDA

View Full Version : Need Help with oil pressure sensor.



CanadianBuell
04-23-2007, 04:58 PM
My oil pressure indicator light is not working. In the service manual it says that there are four causes. One being a dead battery (no S_ _T) the other three are, bad wires, bad bulb, bad sensor. The wiring is fine, which leaves the bulb or sensor. FInally the question.... How do you test the bulbs? The manual says that the instrument panel is non servicable, but I think you should be able to light all bulbs to verify operation. They all light at start up for four seconds if all is okay, but if they don't it doesn't necessarily mean it's the bulb. So I have ordered a new sensor, they're cheap, but I still want to know how to test bulbs. Thanks guys.

CanadianBuell
04-25-2007, 04:38 PM
Well I changed the sensor, it cost $19 and that was the problem. Good to go.

2Evil4U
04-27-2007, 01:00 PM
Where is the sender unit anyway?

xb12r200951
11-12-2010, 03:30 PM
next to the oil filter