PDA

View Full Version : Buell 1125 Race Motor, 1250CC



Puzzled
02-16-2013, 10:42 AM
Buell 1125 Race Motor

1250CC
Millenium Technologies Cylinders, Stripped, Overbore, Nocosil coat, diamond hone
CP 4.275" domed pistons, pins, wire locks and rings
Carillo Rods
ARP rod bolts
ARP/EBR Head studs, washer and nuts
Revolution Stage 3 head porting
.010" milled surface
Heads are O-ringed for lock-wire
Del West/EBR 42MM Titanium Intake valves, 35.4MM Titanium Exhaust valves
Del West/EBR Springs
Del West/EBR Bronze guides
Beryllium Copper seats
Crower Performance Drag Race Cams
Balanced and welded crank
Cometic head gaskets
Buell gasket kit

Bottom end of the motor is assembled. The top end will have to be finished up, the parts are all here.

$6500.00 plus shipping. I know this is more then some paid for their complete stock motorcycle. Then again the heads alone are close to what an 1125 was selling for during the "Fire sale". This IS NOT a street motor. This is for racing. Current cam selection is a drag race cam, with a different cam choice you could have a road race motor.

My local drag strip has closed their doors and I have no desire to travel to race, so I'm selling my drag race stuff.

mikecorrell2000 (at) yahoo (dot) com

Pics of the build
http://www.njbuellowners.com/forum/viewtopic.php?f=7&t=364

http://www.badweatherbikers.com/buell/messages/158 664/626675.html?1302618326

http://www.badweatherbikers.com/buell/messages/158 664/634426.html?1304106388

http://www.badweatherbikers.com/buell/messages/158 664/668798.html?1320021898

http://www.badweatherbikers.com/buell/messages/158 664/609863.html?1329770702

bigrodge8
02-17-2013, 06:45 PM
$6500 lololololololololololololololololololololol....
GLWS

Puzzled
02-17-2013, 06:59 PM
Crank, rods, cylinders and pistons are close to 5K alone. This isn't street stuff. 8 Titanium valves was $1025.00. Head porting was 3K

Seriously if you don't have any understanding of the cost of race parts please don't **** in my thread.

konarider94
02-17-2013, 07:05 PM
thats too bad about your local track, i enjoyed following your drag racing/build thread

Puzzled
02-17-2013, 07:09 PM
I'm on the fence whether to finish the bike and just travel out of area to race.

I was turned on to this last night. EFR 1382 stroker kit. 5k for the lower end.
http://www.efrracing.com/performanceparts.html

GregoXB
02-17-2013, 07:10 PM
I am not interested in buying, but just out of curiousity.... How much power and torque does that motor make?

Puzzled
02-17-2013, 07:13 PM
Very good question, based on all of the numbers this should be a 200-210 horse power motor at the rear wheel.

It hardly compares to a stroker Busa motor but it sure is different..;)

GregoXB
02-17-2013, 07:13 PM
[up]