PDA

View Full Version : Race ECM & Race Can Help



spokesniffer
03-06-2013, 05:43 PM
Hey gang. New guy here. I finally got the cheddar to buy a 2009 XB12scg. Bone stock zero mods and 1200 miles! The guy also purchased a race can(ceramic coated?) and a race ecm (M31PA292). These are not installed. The stock bike has plenty of power (for now)[smirk] I'm just hoping for more rumble and maybe smooth it out a bit. What are the recommended mods for this map? I have a note that the ecm is calibrated with the altitude compensation turned off. The dude still had the receipt for the ecm. Any help would be appreciated. Thanks.

orgeopes
03-07-2013, 04:10 PM
Welcome! Add a K&N filter and you're done!

netty2424
03-07-2013, 04:18 PM
you sell those pieces of crap to me, that's what you do with them! :D:D

jk! you have a nice set up there. As orgeopes said, add a K&N and you'll be good. post a pic of that ceramic coated can.

welcome to the forum!

redrider
03-07-2013, 05:36 PM
[up] welcome

spokesniffer
03-20-2013, 06:48 PM
So I tried to run it with the airbox. Coudn't wait for that KandN to arrive. Runs like crap. Better right off the line with less throttle required at takeoff. Sounds cool. Pops like mad on decel. The eeprom is m31pa292. Anyone out ther know what that setup calls for. Would the gang at EBR be able to tell me?

spokesniffer
03-20-2013, 07:09 PM
http://i862.photobucket.com/albums/ab187/spokesniffer/image_zps32b0d692.jpg