What else do I need

[nitto12ss]

Hey BPG, I just bought the side rails and the plastic under tail of a 12S. I plan on putting the S tail on my SS and was wondering if any other parts are needed to complete the swap.
Thanks
Walter

[BuellPartsGuy]

I haven't had my hand in that kind of swap before. If you have a fax number for a fax machine near you, I can send you the exploded views of both styles with part numbers so you can see it all first hand.

Call me here at the store

623-247-5542

ask for Brad in parts

[nitto12ss]

No fax, but thanks. I think I should be good to go, but was just after a second opinion.
Thanks again
Walter[up]

[Trill]

I hope the best for you and would consider doing this myself if not too much fabrication required.

Keep us posted

[nitto12ss]

Trill
I dont think there is much that needs to be done. My biggest concern involves the rear shock reservoir placement. On the Ss it is in the front and on the S it is towards the back of the seat pan. As long as the hose reaches I should be good to go.