PDA

View Full Version : 1190 RX, under the bodywork.



d_adams
03-17-2014, 01:23 AM
Adjusted my pitbull stand. 15.75" wide on the outside edge to clear the swingarm.

https://lh6.googleusercontent.com/-riyskNWhKMw/UyWFpQtW5xI/AAAAAAAACKY/z4wbQzufcoI/w572-h763-no/Inspection.+1190RX+-+6

https://lh5.googleusercontent.com/-gpMXplVgyKE/UyWFpWCdgHI/AAAAAAAACKQ/rIz7ajCjd8E/w572-h763-no/Inspection.+1190RX+-+5

Most bodywork removed.

https://lh3.googleusercontent.com/-DNQkzyfBY7g/UyWFpSu8ouI/AAAAAAAACKI/VoBkXhTdRTs/w1017-h763-no/Inspection.+1190RX+-+4

Mmmmm, showerhead injectors.

https://lh3.googleusercontent.com/-2uEDaazHY-E/UyWFpVYvfPI/AAAAAAAACKA/DTPHXwoqOqc/w572-h763-no/Inspection.+1190RX+-+3

https://lh6.googleusercontent.com/-aWtltbmFznk/UyWFpYvpAnI/AAAAAAAACJ4/kkZhB-DeVpk/w1017-h763-no/Inspection.+1190RX+-+2

https://lh4.googleusercontent.com/-vPpXpmbnNMY/UyWFpfKI9DI/AAAAAAAACJw/LDCQFuiyLAk/w572-h763-no/Inspection.+1190RX+-+1

Looks to be another active air intake solenoid like what was on the 1125.

https://lh3.googleusercontent.com/-ATP4W0dFjZg/UyWFpeBp1QI/AAAAAAAACK4/JemiuIiHjBg/w572-h763-no/Inspection.+1190RX+-+10

Same resistance felt at about 1/4 throttle. Removed the cable, resistance gone. Yes, I hooked it back up for now.

https://lh4.googleusercontent.com/-zPXajTEgqmQ/UyWFpZM4rgI/AAAAAAAACKw/tbCIiD4JLGE/w572-h763-no/Inspection.+1190RX+-+9

Suspension settings.

https://lh4.googleusercontent.com/-cas2aQurOq0/UyWFpdCpHEI/AAAAAAAACKg/JgX4l0Iken8/w1017-h763-no/Inspection.+1190RX+-+7

50dro
03-17-2014, 01:35 AM
Hmmm...Wonder if our spooled axle sliders would fit in that rear axle? [confused][confused][confused] ;)

Might be nicer than that small spool?

onelogue
03-17-2014, 01:47 AM
Thanks for sharing Dean! The shower head injectors look awesome! But how efficient can that be? Fuel evaporates and i fee like that would lose fuel...
Also what exactly does the active intake solenoid do?

d_adams
03-17-2014, 01:48 AM
Front is covered by the duct work for the front brake. :(
Rear threaded rod needs to be maybe 3/4" longer than the 1125 one. Hole sizes are different, one is roughly 9/16ths, the other is pretty close to 1" ID.

That small spool is the same as the later model 1125's, it's for lifting only, no crash protection at all.

d_adams
03-17-2014, 01:49 AM
Those top injectors only come on at high rpm/load.

The solenoid partially closes the throttle bodies to keep the noise down, it's an EPA thing, or was on the 1125. I assume it's the same for the 1190.

onelogue
03-17-2014, 02:21 AM
Thank you for the answers. Awesome stuff. Do you plan on deleting the intake solenoid and same C.E.L that it could cause? Sounds restricting....

Matteson
03-17-2014, 04:22 AM
Gosh that bike is so similar to the RC8. They have one down here in Spfld for 14,000. Very tempting.

chief_of_smoke
03-17-2014, 05:01 AM
i wonder if i could trade in my vrod for that? my have to do some digging.

1badtitan90
03-17-2014, 08:37 AM
Is that how the air box is.. completely open.. where does the filter go. or is there one.. hm

d_adams
03-17-2014, 11:04 AM
Leaving the emissions control stuff in place for now.

Filter is up front, appears to be a K&N. It slides down into a slot and is captured in place.

lawdog
03-17-2014, 11:53 AM
Love the pics. Interesting! Feel free to post more! :) lol

Theycallmecrash
03-17-2014, 02:13 PM
TUUUURRRBBBOOO!!!!!

Just do it.

kelley386racer
03-17-2014, 02:24 PM
Keep them comming Dean. Great stuff.

Backdrafter88
03-20-2014, 02:17 AM
Dean, when are we going to see some of your exhaust on this beauty?

d_adams
03-20-2014, 01:06 PM
I have weeks worth of work stacked up on me, so I'll have to just squeeze it in somewhere in the next month. Also need to get through the break in mileage. I will be running it up to 7500 rpm today just because.

Another 1190rx owner confirmed the active air intake solenoid _is_ for noise control. Looks like a weight savings to me, I need all I can get.

djs2k2
03-20-2014, 01:17 PM
Way to tear into it right away! I would love to have a 1125 and big bore it until I can get the money to buy an 1190!

Jezuz
03-27-2014, 07:51 PM
Nice job, thanks for posting!
And have a good time riding that monster!

go cytocis
03-27-2014, 07:55 PM
You can tell it's an American bike because it give suspension settings for riders "over 315 lbs"! :D

d_adams
04-18-2014, 11:09 AM
Got my plates finally, so it's all good to go now.

https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/t1.0-9/1010225_799373740075055_602406714707404201_n.jpg

Jezuz
04-21-2014, 11:28 PM
[up] happy riding season!