PDA

View Full Version : "secret" ECMspy page



TAMT
05-05-2014, 06:20 AM
Hi
IĀ“m working a little bit with ECMspy. In the program there is a page, thatĀ“is not described in any of the manuals IĀ“ve looked in.
Is anyone familiar with the page and where I can find explanations on the points?
Best regards
Tom Jensen
http://www.buellxb.com/buell_images/18760_20140505001615_L.jpg

ReadyXB
05-22-2014, 09:24 PM
Most of the params on the left are found in the 'System Config' byte.
For example:
http://www.ecmspy.com/cgi-bin/detail.cgi?ecm=79&offset=8

The right side has O2 parameters that are spread across several EEPROM locations.
For example:
http://www.ecmspy.com/cgi-bin/detail.cgi?ecm=79&offset=28

DrogeN Omen
05-22-2014, 11:57 PM
has anyone tested 03-07 EBR ECM's with ECMSpy?

i got an Email response from EBR advising that they nolonger have Software Support for EBR ECM's prior to 08.

i am kinda stuck now with a EBR ECM for my 2007 XB12SS that is in bad need of a tune.

PLEASE HELP...!

i'm sure there is alot of people out there with pre 2008 XB's running EBR ECM's what would greatly appreciate the help...

ese12105
05-23-2014, 12:41 AM
I've got an '06 XB12Ss I'm about to redo my ECM with ECMSpy once I install a new exhaust and K&N air filter. Looks pretty easy to do, I have the race map that I'm going to use. If you have not changed anything on your bike, you shouldn't need to tune it though because it's not like a carburetor... I could be wrong though... The only thing I could think of if your bike isn't running right, there is something wrong with the ECM or somewhere else...

DrogeN Omen
06-03-2014, 01:04 AM
bump.