PDA

View Full Version : Championship winning Buell XB12 Racebike / Trailer For Sale



tim33625
04-11-2009, 02:59 AM
Officially retiring from racing.

For Sale: Regional Multi-Championship winning Buell XB12 Racebike / Trailer / Spares etc.

This bike is fully prepped and ready to race. The engine is fresh with one race weekend on it (2 sprint races + practice). Very Quick and Very Reliable! Custom Race ECM mapping was performed in the Buell Factory Racing dept (in East Troy, WI) by Glen Veatch.

It is tuned (mapping/ignition) to meet the HP/Weight requirements for the Moto GT at >95HP/390 lbs., but unrestricted on race gas it makes 98-100HP on the dyno. Great if you want to run regional sprint classes. This same configuration with cams and higher comp pistons has made 118HP reliably in the past. Ran full season with no issues other that replacing an oil line.

I have the Buell software and maps for tunning the Race ECM

I am willing to separate bike / trailer / spares as a group, and will accept reasonable offers. By "group" I mean (ie: 1.)complete bike with spares kit, 2.)Spare frame with Triples, forks, wheels and wire harness or, 3.)Trailer or a combination of these etc.) I'm not interested in sending a set of oil lines or a generator to Oregon or Wisconsin or wherever.

View more pictures and details here: http://www.racemmg.com/buellracebike.htm

You can contact me anytime at: tim@s3media.net

Motor:
Freshly built AMA/Moto GT2 (Formerly GST) legal. (Built for Endurance racing and can be easily tuned for sprints)
Custom Race ECM mapping was performed in the Buell Factory Racing dept (in East Troy, WI) by Glen Veatch.

Race Equipment:
Fully prepped Buell XB race bike
(2) stands front
(2) stands rear
(3) sets of wheels
(2) rain tires front
(1) rain tire rear
Assorted DOT & Slick scrubs
Tire warmers
Custom Beson exhaust
Adjustable cam timing
Factory Race ECU with software (Tuned at Buell Factory Racing Dept.)
Vortex sprockets complete (39-47 rear) Plus Daytona specific gearing
X-ring chain
SS Brake Lines
EBC pads
Buell full race body
Penske Triple adjust Rear
Kit fork internals prepared by GMD Computrack
Custom "Hal's" rear swing arm (braced / reinforced)

Spares: *** Since this was an endurance team we have essentially enough spares to complete a second bike less the motor and swing-arm***
Complete race only frame purchased from Buell Racing
Factory Sub frame
Fairing Stay
Complete wire harness
Spare forks
brakes
clutch
cables (clutch and throttle)
(2) sets of complete oil lines
rear sets
clip on bars
chains
axle
wind screen
grips
engine case covers
Buell specific tools

Pit Area Equipment:
Rolling Tire/wheel Tree (holds up to 12 wheels)
Impact wrench
(2) 10X10 Easy-Up tents
(2) folding tables
(3) folding chairs
(3) extra large stackable storage bins

Trailer:
AOK 16ft Dual axle trailer with ramp door
Custom installed work bench with cabinets
Overhead storage cabinets
Tire/equipment shelf
2600 Generator
Electrical cables


For Racing Only:
Frames are Buell Factory Race-Only frames. This bike was built from the frame up specifically for racing and there is no street equipment included.

Also selling set of leathers (fits 6' to 6'4" 190-225lbs.) I'm 6'2" 185 and they fit loosely. Make offer.

http://www.racemmg.com/images/buell0409-a.jpg

http://www.racemmg.com/images/buell0409-b.jpg
http://www.racemmg.com/images/buell0409-c.jpg
http://www.racemmg.com/images/buell0409-d.jpg
http://www.racemmg.com/images/buell0409-h.jpg

vosnick52
11-30-2009, 11:30 PM
Is this gone?
What year and what is the price for bike and spares.