Buell Trading Post - TRADES ONLY

[thrstrmech]

Ok guys, here goes...

Up for trade are a Buell Messenger bag, in excellent condition, has both straps and new knee pucks, unused.
http://www.buellxb.com/buell_images/10624_20141201215750_L.jpg

My wish list is as follows:
1. OEM L/H grip
2. Nylon body washers
3. Black Nylon center chin fairing washers
4. Shoulder screws...both for air box and chin fairings
5. Front OEM turn signals, with standoffs, not cracked or broken
6. Stock '03 handle bars, not bent

***Note the condition of the items trading when considering what you want to trade***

[thrstrmech]

...this thread is open to all, so come on and post up whatcha got:D

[DrogeN Omen]

thrstrmech, I have stock XB front indicators i think.

only problem i see with this is who pays for shipping???

i am in New Zealand. :(

my wish list is
- Buell Uly heated grips
- XB12SS seat cowl (fiberglass)

[Mope]

thrst, I'll take a look this weekend - should have some of that stuff in the fastener/hardware box.
Lightning bars? Was there a difference between years? (cause now I'm worried my replacement set may be incorrect as I know my e-bay bars were early year revision #)

My wish list (after July accident on the xb):
1. Clean 12 headers
2. Bar End Mirrors
3. right frame rail (not SS)
4. lightning (drop) rider pegs
5. right frame puck. I have adhesive
6. Left side scoop
7. *2008 lightning bars - if the answer to question above is that they are potentially different!


Willing to buy if well priced, otherwise I'll trade up or down/ plus or minus cash with:
CR clubmans; Ronin new/never usedish
2009 XB CRG's black and red (I have to confirm 09; could be 08)
2009 ASV's for 1125 (also have to confirm, believe all black)
Firebolt rear subframe, used good
6 row oil cooler, used good
New never installed firebolt rider pegs
All black xb chin fairing; may be new/never used
Have it all? Have a new/never on bike lightning streetfighter seat (small separation at Pegasus; other than time unknown how) or a lightning select no tears but some type of deflation at the ass (the 'V').
Again, all this stuff has been in storage for ages so I'd have to confirm before trading.

[thrstrmech]

Droge...the person who wants the item would be responsible for shipping, however if the person with the item wants to do so, then that is entirely up to them. From the U.S. to there using the postal service flat rate, it would be about $60 USD.

Mope...the P/N: N0002.1AD is the number for '03 model Lightnings, don't know if they are the same as newer models.

[mrlogix]

this is cool :D

good idea thrstmech :)

[mrlogix]

admins- can we make this a forum header in the for sale section?...please :D

[thrstrmech]

messenger bag spoken for...

knee pucks up for grabs

[mrlogix]

Nicely done. Thrust mech +1

[thrstrmech]

thanks

[theoctopus]

I moved this to the Buell Parts for Sale sub-forum because it seemed to fit there best. I also changed the name to make it more clear and made the thread a sticky so it will sit at the top. If you want any of that changed, thrstrmech, just PM me.

[Shawns]

Outstanding[up]

[fishxb12]

[up]

[WayneBrettzky]

Want: Octopus programmed 09 xb9sx ECU

For trade: my life

[thrstrmech]

[up] awesome, thanks theoctopus

[mrlogix]

[up][up]

[thrstrmech]

mope...sent you a pm

[thrstrmech]

FYI all...shipping cost can be greatly reduced by shipping parcel post or SAM if you're not in a rush to get your item(s). For instance when I was in Kuwait, shipped a foot locker through the USPS, weighed about 46 lbs and cost roughly 36 bucks, it took 7 days for it to arrive in California. And also shipped a Ligthning seat to Florida from California for 17 bucks, think it got there in 5 or 6 days...just saying.

DrogeN Omen...this may an option for anyone stateside shipping to you in New Zealand.

[thrstrmech]

'04 12s fuel pump...bought this recently to find out it's not for an '03. Did not try it out prior to disassembly cause it had corrosion on the pump, pump base and filter. I cleaned up the housing and the mount where the pump and filter go. The screw, e-clip, nut for the feed hose and rubber bushings for the filter are good and can be reused. Found three of the four wires are chaffed from the filter and pump mount and the forth wire only has a nick in the insulation, but no wire strands showing. Those can be repaired. Needs new filters, O-rings, and pump.
http://www.buellxb.com/buell_images/10624_20141220140049_L.jpg
http://www.buellxb.com/buell_images/10624_20141220140014_L.jpg
http://www.buellxb.com/buell_images/10624_20141220135809_L.jpg
http://www.buellxb.com/buell_images/10624_20141220135739_L.jpg

[thrstrmech]

Update on the pump wires...repaired with environmental splices, used the red ones cause they fit the wire sizes best.
http://www.buellxb.com/buell_images/10624_20141223204846_L.jpg
http://www.buellxb.com/buell_images/10624_20141223204821_L.jpg
http://www.buellxb.com/buell_images/10624_20141223204752_L.jpg
http://www.buellxb.com/buell_images/10624_20141223204725_L.jpg
http://www.buellxb.com/buell_images/10624_20141223204658_L.jpg

[UMDterp13]

I sell a lot, but I'm up to trade also!

Just ask & let me know what you would/could trade. If it's for XB, I probably have it and would consider trading.

I'd be interested in but not limited to:
- uly stuff
- lightning stuff
- buell factory accessories
- shifter & or voltage plastics
- Yamaha R6 factory bike cover (any manufacture factory bike cover)

[Buellstuff]

I have a set of black plastics for my 06 xb12ss that I'd trade. In great shape with no flaws. Came with the bike and I'd rather have a different color. I'm in Pennsylvania.

I'd trade for just about any other color lightning plastics in good shape. Let me know what you have, thanks.

[thrstrmech]

Buellstuff...any pics?

[thrstrmech]

I have these...
http://www.buellxb.com/buell_images/10624_20141226102717_L.jpg

[Shawns]

Trade for? Gear? 1125 parts?
http://www.buellxb.com/buell_images/17116_20140520150455_L.jpghttp://www.buellxb.com/buell_images/17116_20140520150416_L.jpghttp://www.buellxb.com/buell_images/17116_20140520150343_L.jpghttp://www.buellxb.com/buell_images/17116_20140520150251_L.jpghttp://www.buellxb.com/buell_images/17116_20140520150220_L.jpghttp://www.buellxb.com/buell_images/17116_20140520150140_L.jpg

[thrstrmech]

I have a set of blue frame decals w/instructions from matter...
http://www.buellxb.com/buell_images/10624_20141229165005_L.jpg
http://www.buellxb.com/buell_images/10624_20141229164939_L.jpg

[thrstrmech]

Anyone looking to trade wheels? Stardust Silver, bearings and spacers replaced earlier this year with new ones. The bearings were from All Balls Racing, spacers from ASB.
http://www.buellxb.com/buell_images/10624_20140922195053_L.jpg
http://www.buellxb.com/buell_images/10624_20141023211921_L.jpg

[thrstrmech]

Bump...

listed items still up for trade minus the messenger bag, it's gone:p

[thrstrmech]

Anyone have the stock '03 silver/orange dashboard?

[thrstrmech]

wheels are spoken for :p

[Cosworth]

Ive had this jacket awhile, looking for 1125R conversion parts.
Picture makes it look kinda dingy I assure anyone its just the picture.
http://www.buellxb.com/buell_images/18151_20140714052344_L.jpg

[heagachongoose]

What kind of parts are you looking for cosworth? R to cr??

[Cosworth]

Looking to go CR to R

Jacket is a medium by the way. Will also consider other parts, its too big for me so not doing me any good.

[thrstrmech]

Cosworth...will that jacket expand with adding water:D been looking for one in my size....x grande, lol

Bump

[Cosworth]

It's stretchy ;)

[DualSportDad]

Trade uly low seat for accessory tall seat.

I have a low seat in great shape and am looking to trade for the tall seat that was a accessory on 07+ uly's. I have a 06 uly and am looking for the update tall seat without the seams on the top of the cover.

Picture listed is the actual low seat i'd like to trade and the tall seat I'm looking for would have the same style cover.

http://i963.photobucket.com/albums/ae112/dualsportdad/2014-06-08%2012.33.14.jpg

[thrstrmech]

Bump...

[AZmidget91]

Figured I would put it out there that I am looking for a seat cowl for a XB12SCG.

For trade I will have yellow plastics and stock mirrors.

Also want to trade my silver wheels for white ones.

Or even my silver scg forks for black scg forks

[thrstrmech]

I still have the knee pucks, matter frame decal and fuel pump. Looking at the frame decal, this may have been the one of the first designs that matter made. I'll have to pm him and verify. May also have an R front fairing and tail section with lock assembly, no keys.

[Global Eyes]

Looking to trade these bar end mirrors. Not even sure what i'm after, but i could use a black CR windscreen. Maybe the dash piece where the gauges typically go for the CR. Let me know what you think. The red one's are Rizoma, and the gold one's are knock off's. I have them photoed together for size comparison. This is for the gold one's. These are brand new.

Ebay (http://www.ebay.com/itm/Mirrors-Bar-End-SPY-Q-Blue-Glass-Len-Rearview-CNC-for-Street-Sport-Bikes-Black-/251704289574?pt=Motorcycles_Parts_Accessories&hash=item3a9abea926&vxp=mtr)

http://i1278.photobucket.com/albums/y509/GlobalEyes1/IMG_3115_zps58enldjj.jpg

http://i1278.photobucket.com/albums/y509/GlobalEyes1/IMG_3116_zpsx5lnw7za.jpg

http://i1278.photobucket.com/albums/y509/GlobalEyes1/IMG_3114_zpsufl6vgvg.jpg

[neilrl79]

Anyone have any interest on cheek pads from an RF1200? I have 2 sets that are both 35mm which come standard in the L and XL helmets. 1 set has never been worn and the other set has only an hour or two use.

[thrstrmech]

Bumping this up....

frame decals and knee pucks for you track guys still up for grabs

[ChiefXB9R]

Have Sky White wheels off of 2005 XB9R. Has rotors on them and bearings installed no sprocket installed.

Looking for R plastics in white, blue, or black.( or any color other than yellow. Or a more comfortable seat. Or what do you have to offer.

[Mope]

I'm looking for a R/CR/Firebolt pillion seat - can totally be trashed and that's ok. I'm looking to affix a hard case to the base for some overnight storage on the CR (which just got it's xb chin fairing bolted up :D)

[AZmidget91]

Thrustrmech, what frame decals are they?

[ChiefXB9R]

Here are some pictures. Tires are no good. Sorry for them being dirty haven't cleaned them up.

http://i1301.photobucket.com/albums/ag110/hemipwr61ng/Mobile%20Uploads/20150331_130226_zpsa5mtfjoe.jpg
http://i1301.photobucket.com/albums/ag110/hemipwr61ng/Mobile%20Uploads/20150331_130229_zps9kkfgmow.jpg

Some chipping of white
http://i1301.photobucket.com/albums/ag110/hemipwr61ng/Mobile%20Uploads/20150331_130247_zpsqkukn2sg.jpg

[thrstrmech]

http://www.buellxb.com/buell_images/10624_20141229165005_L.jpg

they are blue and white, think it's was matter's first design of the frame decals

[DrogeN Omen]

what size are those decals?

[thrstrmech]

about 7-1/2" x 20", standard frame decals

[Enemy Zero]

I have a good as new Select Seat (even has the rubber on the locking tabs), looking for a Race Pipe, GB exhaust or Drummer SS.

Only pic I currently have of it. I will get more if there's an interested party.
http://www.buellxb.com/buell_images/16427_20150417120618_L.jpg

There was a thread a while back with someone looking to do this kind of trade, Thought I'd throw it out there.

[ztied]

thrstrmech are you still looking for the silver dash panel? I believe I have one here

[thrstrmech]

thanks, got one
http://www.buellxb.com/buell_images/10624_20150225154708_L.jpg

[ztied]

Ok cool, looks good, i got a spare if someone needs one

[Lnhiv]

I could use the complete fuel pump assembly. Also would like the yellow plastics. I have a set of black minus the chin fairing I wouldn't mind trading.

[thrstrmech]

Lnhiv...pm'd you about the pump...I'm interested in the black plastics, give me a call or text (951)265-4160.

[thrstrmech]

http://www.buellxb.com/buell_images/10624_20150425122710_L.jpg

trade my R tail section for an 1125 CR headlight assembly (dash cover, flyscreen, headlight and harness)

[thrstrmech]

bump, any one......hellooooooooooooooooooooooo:D

do you need something else to sweeting the deal?

[An03inAZ]

I'll buy the r tail from you on Fri :) if you can't get a trade lol

[thrstrmech]

cool, that will get me closer to getting the CR set up:D

[thrstrmech]

bump...still looking to trade the "R" tail section, also have an MDI carbon seat cowl for a Lightning for the before mentioned CR parts
http://www.buellxb.com/buell_images/10624_20150517112408_L.jpg
http://www.buellxb.com/buell_images/10624_20150517112327_L.jpg
http://www.buellxb.com/buell_images/10624_20150517112247_L.jpg

[LoneStarBeer]

Anyone want to trade their Lightning tail section for my Firebolt section. Zero damage, in perfect shape.

http://i1217.photobucket.com/albums/dd385/PukaMiniBulldogs/Mobile%20Uploads/20150408_163630.jpg

[WayneBrettzky]

1125r front fairing and tail section in black. A few scratches, I can post pics if there's any interest. I also have the airbox, but planned on keeping. Would part with if needed.

[50dro]

Looking for original black fender and chin fairing fr an XB. Would be interested in trading for some 5-0dro parts...lmk.