jm1125r
01-14-2015, 01:27 AM
So i have a 2008 buell 1125r with 7000 miles. I recently decided i wanted a change so pulled the frame/tank off and swing arm and had the blue blasted off and im gonna run it silver. Well todo all this i had to unhook the almost all the wiring connections in the tail section and in the front to the gauges and everythhing else up front. So i got the bike all back together and have all the connections back just like they were and nothing will turn on and im unsure why. when i turn the switch to on the gauges dont light up or anything. The bike does nothing at all ..... made sure ground was good and everything was hooked up but not getting any power. ....any thoughts ?