PDA

View Full Version : Various Buell 1125 pieces and parts



Puzzled
07-16-2015, 09:51 PM
2 Air box with base plate, 1 with lower air scoop one without- $40 each

2 sets stock levers - $20

6 piston front caliper - $50

8 piston front caliper - $275 SOLD

Clutch master cylinder - $45

Stock rear sub frame - $75

Stock Rear shock - $100

2 R 2008 Blue swing arms - $75 each

Drive belt NEW 145 tooth - $140

Drive belt 145 tooth used - $70 SOLD

70 tooth rear pulley - $75

76 tooth rear pulley new - $100

70 tooth rear pulley yellow - $30

2 stock rear rotors - $35 each

Rear wheel blue - $250

Front wheel blue with rotor - $250

Front sprocket/pulley cover - $10

2 Lower belt guards - $10 each

1 Upper belt guard painted white/blue $10

2 frame cover/ heat shield - $20 each

Stock 08 taillight red - $35

Stock rear turn signals -$50

Stock Rev A case slider with Pegasus, no O-ring - $20 SOLD

2 rear fender huggers $15 each

Black Tail section - $75

Stock front seat - $50 SOLD

LH rear passenger peg bracket NEW - $50

Idler pulley bracket NEW - $30

Stock front forks - $400 SOLD

Red CR fly screen - $40 SOLD

Black CR fly screen (mark) - $35 SOLD

Black front fairing - $125

Black tail seat cover - $50

Left and right black radiator covers - $85 each

I’ll post as many pictures as I can. If you want to see something specific let me know.

All parts are in very good to good shape. No broken or missing tabs, no cracks. Damage noted where need be.

Shipping isn’t included (small items can ship USPS flat rate for relatively inexpensive).

PayPal is mikecorrell2000@yahoo.com, send as friend family or add the 3%, be sure to include your shipping address in the notes section of PayPal.

Thank you for looking. :)

Puzzled
07-16-2015, 10:06 PM
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0713151508.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0713151508.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151456.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151456.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151456a.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151456a.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151457a.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151457a.jpg.html)

Puzzled
07-16-2015, 10:07 PM
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151458.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151458.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151521.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151521.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151521a.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151521a.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_161135_431.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_161135_431.jpg.html)

Puzzled
07-16-2015, 10:07 PM
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_161210_484.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_161210_484.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_161147_053.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_161147_053.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_161415_718.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_161415_718.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_161433_612.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_161433_612.jpg.html)

Puzzled
07-16-2015, 10:08 PM
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_161447_468.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_161447_468.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_161103_522.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_161103_522.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151508.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151508.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151511.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151511.jpg.html)

Puzzled
07-16-2015, 10:09 PM
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151511b.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151511b.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151512.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151512.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151515.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151515.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0713151506.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0713151506.jpg.html)

Puzzled
07-16-2015, 10:10 PM
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0713151505.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0713151505.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0713151506a.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0713151506a.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0713151506b.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0713151506b.jpg.html)

Puzzled
07-16-2015, 10:14 PM
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151457.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151457.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151456b.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151456b.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_164729_022.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_164729_022.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/IMG_20130602_164545_218.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/IMG_20130602_164545_218.jpg.html)

Shawns
07-16-2015, 10:28 PM
Interested in the black flyscreen.

Puzzled
07-16-2015, 10:34 PM
Interested in the black flyscreen.
Ok you are second in line for it. Fellow forum member is looking to take both CR screens. I'll allow a reasonable time for payment than you are up!!

coaldigger
07-16-2015, 11:06 PM
interested in rear rotor

Lnhiv
07-17-2015, 01:14 AM
Possibly interested in the yellow pulley. Any idea if it'll work on an xb12? I'll search around, too.

Shawns
07-17-2015, 03:28 AM
Danka..just let me know. Still feeling my way around this new format.

Puzzled
07-17-2015, 10:31 AM
interested in rear rotor

No problem. I can ship that in a flat rate envelope for $6 anywhere in the US.

Puzzled
07-17-2015, 11:23 AM
Both CR fly screens have been sold.

Puzzled
07-17-2015, 01:41 PM
Possibly interested in the yellow pulley. Any idea if it'll work on an xb12? I'll search around, too.

I don't know what tooth pulley the xb uses, I'm thinking it is 65 however I'm not positive.

Puzzled
07-17-2015, 01:47 PM
Danka..just let me know. Still feeling my way around this new format.


Pm'd you on buellxb, don't know if you got it. I want the black CR bug shield and the tank heat shields

Tank heat shields are available.
Fresh black color
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151511.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151511.jpg.html)
Faded, great for paint.
http://i191.photobucket.com/albums/z238/mlcorrell/Sales/Buell%20parts/0716151511b.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/Buell%20parts/0716151511b.jpg.html)

coaldigger
07-17-2015, 02:48 PM
the rotors will fit the 09 cr?

coaldigger
07-17-2015, 02:56 PM
payment sent....gimme a gooun would ya? Thanks.....
Evan

coaldigger
07-17-2015, 03:28 PM
i meant to say" please send me a good straight one" sorry

Puzzled
07-17-2015, 03:44 PM
LOL I know what you meant...

Shipping your rotor right now....

Tracking info to follow...

Lnhiv
07-17-2015, 05:42 PM
I don't know what tooth pulley the xb uses, I'm thinking it is 65 however I'm not positive.

Yeah, that's what I found too. Oh well.

mrlogix
07-20-2015, 03:15 AM
still have the swing arms?

Puzzled
07-20-2015, 03:37 AM
still have the swing arms?

Yes I still have a blue swingarm.

mrlogix
07-20-2015, 04:55 AM
Who started this 10 character minimum requirement? Maybe now it will let me say 'pm sent'.

Puzzled
07-20-2015, 11:49 AM
Who started this 10 character minimum requirement? Maybe now it will let me say 'pm sent'.

Received and returned.

coaldigger
07-21-2015, 09:30 PM
just wondering if you had time to ship out the rotor? thanks

Puzzled
07-21-2015, 10:16 PM
Yes I did. You should see it tomorrow or Thursday according to tracking info.

mrlogix
07-21-2015, 10:47 PM
by chance get a quote on shipping on the items we talked about? No rush, just checking.

coaldigger
07-22-2015, 05:54 AM
Thanks puzzled. Waiting on bunch of parts. Bike down..makes me very uptight and impatient.lol. drives me crazy. Wife says.." Fix the bike or get on some meds" lol.u wouldn't happen to have left rider peg spring laying around would ya?

Fatty SS
07-22-2015, 11:04 AM
Any chance you've got the rubber tip from the shifter?

Puzzled
07-22-2015, 01:53 PM
by chance get a quote on shipping on the items we talked about? No rush, just checking.

No I did not. I'll have to check my PM's for a ship to zip code.

mrlogix
07-23-2015, 12:34 AM
45246 Springdale Oh

bubba_
07-23-2015, 04:46 PM
interested in the clutch cover puck w/ pegusus logo/ plate, if still available.
(didnt see the it listed tho or a price?)

coaldigger
07-23-2015, 06:31 PM
curious about the rotor? i didn't receive any tracking info and it still hasn't came. sorry if i seem anxious, but im ready to put bike bacl together and ride.

ali
07-23-2015, 08:27 PM
Do you have ZTL2 master brake cylinder?

coaldigger
07-24-2015, 07:16 PM
Do you have ZTL2 master brake cylinder?
Now I'm kind of meaning to be an asshole. Mailman came and went and no rotor. You said a week ago that u would send tracking info?... Don't have rotor and don't have tracking info and you haven't responded to anything. Either want the rotor or money back. Would have had a new one by now. Might not have been upset if u wouldn't have said it was on its way.

coaldigger
07-24-2015, 07:17 PM
Sorry Ali...meant for seller .

bubba_
07-24-2015, 10:21 PM
maybe something came up and he's unexpectedly out of pocket..
it happens

he never responded to me either btw

mrlogix
07-24-2015, 10:43 PM
pm'd back and forth on the 20th about one of the swingarms. Was going to quote me price on a couple of parts with shipping. Posted above with he hadn't checked his pm's again where I sent him my zip code. Nothing since.........

coaldigger
07-25-2015, 12:39 AM
you are probably right bubba. big bike night tonight and bike is apart... watching all the bikes go by while im sitting wishing..my fault really. maybe i should have bought new and 2nd day aired it.. The old rotor is fubar. i took mounting bolts out and the rotor turned into a saucer. i have had more than a few bikes and never seen one that had heat warped that bad. I should just be grateful to puzzled that he listed the parts.

Puzzled
07-25-2015, 10:34 AM
curious about the rotor? i didn't receive any tracking info and it still hasn't came. sorry if i seem anxious, but im ready to put bike bacl together and ride.

9405509699938623149960 Tracking shows it is in transit still, it should have been there already. I sent it Priority which is usually no more than 3 days ship time.

Puzzled
07-25-2015, 10:35 AM
maybe something came up and he's unexpectedly out of pocket..
it happens

he never responded to me either btw

Sorry guys I'm not getting notification that there are new replies to the thread.

Puzzled
07-25-2015, 10:36 AM
interested in the clutch cover puck w/ pegusus logo/ plate, if still available.
(didnt see the it listed tho or a price?)

Clutch cover with puck and sticker is still available.

Puzzled
07-25-2015, 10:37 AM
Do you have ZTL2 master brake cylinder?

No I do not.

Puzzled
07-25-2015, 10:37 AM
8 piston caliper, master and brake line have been sold.

Puzzled
07-25-2015, 10:40 AM
pm'd back and forth on the 20th about one of the swingarms. Was going to quote me price on a couple of parts with shipping. Posted above with he hadn't checked his pm's again where I sent him my zip code. Nothing since.........

Your situation is a little different as I have to actually box the items up so I know size and weight. Just haven't had the time. The parts are here, it's not common to have large boxes just sitting around. I didn't want to guess.

bubba_
07-25-2015, 12:22 PM
is this the listing/ price? (the puck)
- Stock Rev A case slider with Pegasus, no O-ring - $20

if so, i'll take it please

coaldigger
07-25-2015, 08:20 PM
so its been a few days since item was shipped and after finally getting a tracking # and watching the mailman come and go for the third day i called usps.... The lady stated " sir.....it seems that it has been lost during shipping" what? part of the us government screwing **** up....no....i cant believe it. looks like im out $50....looks like im buying a braking unit. #$%@#@ #&*!!!.

mrlogix
07-25-2015, 08:44 PM
was it insured?

Puzzled
07-25-2015, 11:03 PM
Your not out. It was insured. I'll file a claim and issue a refund.

bubba_
07-26-2015, 03:26 AM
is this the listing/ price? (the puck)
- Stock Rev A case slider with Pegasus, no O-ring - $20

if so, i'll take it please

i apologize Puzzled.. just realized that's not the same puck i want. sorry.
( i wanted the larger one)
guess i have to back out. thanks tho.

Puzzled
07-26-2015, 10:15 AM
I have Rev B GSD pucks here. I can do $40 shipped.

coaldigger
07-26-2015, 01:40 PM
I called USPS yesterday afternoon and started a case. I can send.you the case number if you want.?.

Puzzled
07-26-2015, 02:26 PM
I don't think I'll need it since you initiated the claim. Let me know if you need anything from me.

coaldigger
07-26-2015, 02:54 PM
she wasnt really any help. she said call back in a few days and i can go from there. I will let you know how it all turns out.....I cant remember though if she called it a clain or a case. Thanks for getting back to me.
Evan

Puzzled
07-26-2015, 03:35 PM
If it is a case number it's not a claim. I can initiate a claim and get another rotor on its way to you. Let me know.

bubba_
07-26-2015, 04:53 PM
I have Rev B GSD pucks here. I can do $40 shipped.

does if have the O-ring? decal?
assume its good condition. (looked for pic, but not there?)

coaldigger
07-26-2015, 04:58 PM
im good for mow. maybe give it a couple more days and see if it actually finds its way here... Im sory i got upset, bike had already been down a week for rotor/stator inspection and exhaust work and was hoping to have it going by friday for the big gettogether. Im all good now and am confident that the bike is ready to go oncea new/good rotor is back on bike.
Thanks puzzled and ill get back with you this week and let you know. Unless u need to start something now.
the numkber i have is `ca124005930

Puzzled
07-27-2015, 01:27 PM
does if have the O-ring? decal?
assume its good condition. (looked for pic, but not there?)

No there is no decal and it doesn't come with the O-ring. These are aluminum. The design/logo is engraved into the slider.

http://i191.photobucket.com/albums/z238/mlcorrell/Grand%20Stand%20Designs/revb5.jpg (http://s191.photobucket.com/user/mlcorrell/media/Grand%20Stand%20Designs/revb5.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Grand%20Stand%20Designs/revb1.jpg (http://s191.photobucket.com/user/mlcorrell/media/Grand%20Stand%20Designs/revb1.jpg.html)

http://i191.photobucket.com/albums/z238/mlcorrell/Grand%20Stand%20Designs/revb2.jpg (http://s191.photobucket.com/user/mlcorrell/media/Grand%20Stand%20Designs/revb2.jpg.html)

coaldigger
07-27-2015, 03:54 PM
how do i take care of this? I need a rotor. bike is sitting waiting to be ridden. i was hoping that maybe the package would catch up to me today. i have a call into usps and am waiting to hear back. im going to see if i have a claim or a case 3 and see what our options are.

coaldigger
07-27-2015, 04:10 PM
ok....so they called back. What i have is a case number. The lady said that even though you insured the package that it by no means guarantees delivery of this or any package. She said that the investigation started today and that at the end and ONLY the end of 72 hours if the rotor has not shown up, then you can start a claim wich she could give me no definative answer as to how long this process would take. So as it stands you and i are back to square one.....you got paid and im without my rotor. Fix?...not sure...need to know how you want to handle this,
Thanks

coaldigger
07-27-2015, 08:58 PM
the post office just caled again and stated that because you sent priority that in thirty days they can make it right with you and refund your money.

bubba_
07-27-2015, 09:33 PM
No there is no decal and it doesn't come with the O-ring. These are aluminum. The design/logo is engraved into the slider.

thanks for the pics puzzled.. interesting.
that's not the OEM i was expecting. it's tempting, but i guess i best pass. i'll rehab my beat up one.
sorry for the bother.

mrlogix
07-31-2015, 01:54 AM
Your situation is a little different as I have to actually box the items up so I know size and weight. Just haven't had the time. The parts are here, it's not common to have large boxes just sitting around. I didn't want to guess.

never heard back from you, ended up buying a swingarm off another forum member. Thanks anyways.

coaldigger
08-01-2015, 08:18 PM
Puzzled....guess what just showed up at my door....yup rotor..LoL..looks nice....ill keep as a spare.....Thanks,

Puzzled
08-05-2015, 01:56 PM
Puzzled....guess what just showed up at my door....yup rotor..LoL..looks nice....ill keep as a spare.....Thanks,

Ok that is good, I refunded you your payment on the 27th so you'll either have to send the payment or the rotor back. Thank you.

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/er.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/er.jpg.html)

Puzzled
08-05-2015, 01:57 PM
Front forks have been sold and shipped.

coaldigger
08-05-2015, 03:53 PM
Puzzled, the package was all torn up with tons of stickers on it, looks like it had some journey.....pm me you address and ill get it back in the mail.
I was really surprised that it showed up.
Thanks,
Evan.
ps. great looking rotor, if anyone needs one.

Puzzled
08-10-2015, 11:20 AM
Front seat has been sold.

Puzzled
08-10-2015, 11:22 AM
Puzzled, the package was all torn up with tons of stickers on it, looks like it had some journey.....pm me you address and ill get it back in the mail.
I was really surprised that it showed up.
Thanks,
Evan.
ps. great looking rotor, if anyone needs one.

Pm sent with return shipping address.

Puzzled
08-15-2015, 01:12 AM
Puzzled, the package was all torn up with tons of stickers on it, looks like it had some journey.....pm me you address and ill get it back in the mail.
I was really surprised that it showed up.
Thanks,
Evan.
ps. great looking rotor, if anyone needs one.

How are you making out with sending the rotor back?

Puzzled
08-24-2015, 08:52 PM
I still haven't received the rotor or payment.


Puzzled....guess what just showed up at my door....yup rotor..LoL..looks nice....ill keep as a spare.....Thanks,

Ok that is good, I refunded you your payment on the 27th so you'll either have to send the payment or the rotor back. Thank you.

http://i191.photobucket.com/albums/z238/mlcorrell/Sales/er.jpg (http://s191.photobucket.com/user/mlcorrell/media/Sales/er.jpg.html)


Puzzled, the package was all torn up with tons of stickers on it, looks like it had some journey.....pm me you address and ill get it back in the mail.
I was really surprised that it showed up.
Thanks,
Evan.
ps. great looking rotor, if anyone needs one.

Shawns
08-25-2015, 02:02 AM
Do you have a spare VR?

Puzzled
09-18-2015, 09:52 PM
Coaldigger I guess your not going to pay me or return my rotor. I went out off my way to take care of you quickly and have not received the same treatment.

halfagiraffe
09-25-2015, 10:31 PM
still have wheels?

Puzzled
09-25-2015, 10:53 PM
still have wheels?

Yes I do. :)

Shawns
09-29-2015, 08:25 PM
Still have the revision B Clutch puck?

coaldigger
10-01-2015, 04:17 PM
rotor shipped/ Like i said, i am very sorry. i have been working nights and taking care of my mother in another town during the day and honestly completely forgot...Rotor is on its way.

Puzzled
10-02-2015, 11:43 AM
Still have the revision B Clutch puck?

I have several Rev B GSD sliders in stock both in black and silver.

Puzzled
10-02-2015, 11:43 AM
rotor shipped/ Like i said, i am very sorry. i have been working nights and taking care of my mother in another town during the day and honestly completely forgot...Rotor is on its way.

I'll keep a look out for it.

Puzzled
11-01-2015, 02:18 PM
Rotor has been received.

Cherry_Bomb
12-22-2015, 04:46 PM
Stock air filter available?

Puzzled
12-24-2015, 08:20 AM
Just the filter or a complete assembly?

Cherry_Bomb
12-24-2015, 01:01 PM
Just the filter or a complete assembly?

Just the filter. Could use a stock 1125 muffler as well if available.

Puzzled
12-24-2015, 01:55 PM
Ok I have a filter and a stock muffler.

Cherry_Bomb
12-24-2015, 03:26 PM
Ok I have a filter and a stock muffler.

Okay cool. Pm sent

Puzzled
12-29-2015, 12:57 PM
I'm in the office today.... Where would I be shipping to?

Cherry_Bomb
12-29-2015, 04:08 PM
I'm in the office today.... Where would I be shipping to?

Youngstown, OH 44512

Cherry_Bomb
12-30-2015, 01:22 PM
So what are you asking for the parts, since you haven't replied to my pm's.