PDA

View Full Version : looking for wheels


jeridwdshc
06-19-2007, 08:14 PM
so, i wanted to know...what kind of wheels can we throw on the blast? Let me know
ezblast
06-20-2007, 01:57 AM
:D:D:D:D:D:Dafter the chain conversion - any you want!:D:D:D:D:D:D
jeridwdshc
06-21-2007, 08:42 PM
what all parts are needed for the chain conversion?
ezblast
06-22-2007, 03:19 AM
Chain Drive Conversions! (http://www.badweatherbikers.com/buell/messages/20164/216546.html?1154066656)
DruAdams
06-22-2007, 01:39 PM
why do you want to switch to a chain drive? But if you do one of those Sprotors would be a cool way to clean up the back end

http://www.mcadvantages.com/index.cfm?fuseaction=cProducts.viewCategory&cids=-1,30,320
ezblast
06-23-2007, 02:58 AM
Bad idea - a well cared for chain is well oiled - oil and brakes don't mix - lol
GT - JBOTDS! EZ[cool]
jeridwdshc
06-24-2007, 07:56 PM
the guys that run sprotors usually run an oring chain...if im not mistaken
ezblast
06-25-2007, 01:14 AM
Don't o-ring chains still need lubing?
GT - JBOTDS! EZ
jeridwdshc
06-28-2007, 07:15 PM
im pretty sure they are self lubricating.
mrdozer2you
06-29-2007, 12:58 PM
I self lubricate sometimes.



Sorry, someone had to say it :p
jeridwdshc
09-26-2007, 06:27 PM
so i have been reading on the bad weather bikers forum and i can't really figure something out. this is more for ezblast than anything. 17blast did a 17" wheel conversion from an r1. He used the R1 forks...for what reason? Im going to say it was for the brakes and everything but im wanting to go to chain drive and the larger wheels for my chopper im building and the stock wheels are going to cut it. I think im going to go with the x12 wheels but are my forks going to fit?