PDA

View Full Version : Check your NUTZ



MakingPAIN
03-31-2018, 05:10 PM
9472
9473

I haven’t road my EBR for a couple days because of my concern of the clutch hub nut backing off and destroying my machine. My SX is a early 2015 with 4800 miles. So I got into it today and everything looks good “sigh of relief” but I think all should check it out. It took probably twenty minutes to get to the nut.. lol that’s what she said...

Silverrider
03-31-2018, 05:42 PM
mine is 15 sx @ 4500 , I had my clutch out a few times never checked my hub nut ?? How did you check Torque ? Did you use a crank lock tool ?
That would have been a great time to pop these in .
https://www.ebay.com/itm/Erik-Buell-Performance-EBR-SPRING-SET-CLUTCH-6-pcs-CG1007-10AZ-Rev-A/202144526179?hash=item2f10c0af63:g:mNsAAOSwqbxaLqC L

njloco
03-31-2018, 07:17 PM
After only 4500 miles you had/chose to change the clutch springs ?

Silverrider
03-31-2018, 08:15 PM
After only 4500 miles you had/chose to change the clutch springs ?

I wish , I fried my clutch at 2k , long story EBR put lighter springs in the 2015s for the weak left handed guys and the clutch slips at high revs. And to make things worse I added a pipe and tune which increased 15- 17 HP . Long story why I fried my clutch.
9475

I have a strong left arm. LOL diggity diggity diggity 9476

MakingPAIN
03-31-2018, 08:34 PM
No this whole idea was just for a piece of mind. I have seen the stories of them backing off, so I had to check. I just threw it in gear and checked if it was tight.

Silverrider
03-31-2018, 08:39 PM
No this whole idea was just for a piece of mind. I have seen the stories of them backing off, so I had to check. I just threw it in gear and checked if it was tight.

Good idea! play it safe.

Cooter
04-07-2018, 09:17 PM
No this whole idea was just for a piece of mind. I have seen the stories of them backing off, so I had to check. I just threw it in gear and checked if it was tight.

Where have you "seen those stories of the clutch nut backing off"? I haden't ever heard of that and can't find any threads on here, BadWeb, or EBR? Is it just a guy on facebook posting thing?

Mine does rattle quite a bit at idle clutch out like a dry clutch does, but the noise seems to be from the stator side?

MakingPAIN
04-08-2018, 05:04 AM
Can’t remember where I seen it. It was in a video and mucho comments about other people getting into their clutches and seeing the same thing.

And a couple people were saying the stator nut would back off on the 1125..? I don’t know I have no experience with those bikes personally. I figured it is little time for a big problem so I was just planting seeds.