PDA

View Full Version : Overheating



BogadR
06-19-2009, 02:55 PM
I have problem with overheating on my stock XB12SS 07.
After few 6-8km i saw blinking check engine lamp (code 14).
So i changed oil to syntetic, NGK plug sparks, engine temp sensor and still the same.
Checked oil presure (presure is biger then standard), finally i changed ECM for new one (stock IB310).
Now i can ride motocycle but fan starts working after 10km and is still working on max speed all the time :/ In the city i saw twice blinking check engine lamp for a few seconds, but when i read codes (ECMSpy) there was nothing.

Yesterday i checked ignition. It was a little advanced. No it`s ok.
But problem is still :/

Any idea?

Red Gecko
06-20-2009, 02:47 PM
yeah I the same problem with my new firebolt.

the dealer keeps saying nothing is wrong.
Mine gets the frame soo hot, it burns my leg.
Plus my pipes turn red only after a few minutes.

If i find something out, I will let you know.

Red

only1reds
06-20-2009, 08:37 PM
Are you guys letting the bike sit to idle for excess amounts of time in one place? If so, this could definitely be the overheating issue.

BogadR
06-20-2009, 09:47 PM
No i run motorcycle wear gloves, helmet etc. and go. It is taking about 3min to worm up.

BogadR
07-07-2009, 10:29 PM
It is a intake leak.