PDA

View Full Version : belt slipping off



stevedee
07-28-2009, 01:59 AM
G'day i recently replaced the belt on my 06 uly after only 14000 k's, and now i can't push the bike backwards anymore or the belt grinds on the bottom of the front cog. Ive done all the torque settings and everything else and it still does it. Can anyone out their help????

only1reds
07-28-2009, 02:48 AM
Welcome to the Fourm.

It sounds like you are not properly adjusted the belt. Possibly the belt tension needs to be reset as well.

Not exactly sure, but from what I'm getting from the above information is your settings are slightly off.

RT Performance
07-28-2009, 04:10 AM
Not very familar with the uly but i know they use a longer swing arm was the belt the right length?

xtremelow
07-28-2009, 05:21 AM
I am guessing you are jst used to a worn belt and this one it real tight. My new belt on my bolt was really tight loosened up after a few miles.

I was unaware that the uly had adjustments to the tensioner. So that could be the answer also.