RT Performance
07-28-2009, 03:40 AM
Removing extensions from front turn signals
1 remove bug screen
2 unplug one signal connector
3 feed half inch wrench and remove nut
http://www.buellxb.com/buell_images/3929_20090727194714_L.jpg
4 pull extension off,cut one connector off and un thread tube
http://www.buellxb.com/buell_images/3929_20090727194727_L.jpg
5 clamp tube in vice and saw side with more threads off with a hacksaw
http://www.buellxb.com/buell_images/3929_20090727194746_L.jpg
6 file or grind rough threads off,install thread part of tubeand crimp new bullet connector
7 fish wires in reinstall nut and tighten with box end 1/2 inch
repeat for opsite side
reinstall wind screen
http://www.buellxb.com/buell_images/3929_20090727194801_L.jpg
I had down the breather re route and was coughing oil out so i decide to improve it.
I thought hmm i like the look of the NOS little power shots
so go to gas station get a power shot.
i recommend you choke it down since than you get the bottle free.while your there buy or borrow a cap off the bigger nos energy drink(cause they look cool)
drill bottom of small bottle with a 5/16 place tee in bottom.
get a one inch hose clamp and drill a hole 1/4" in the fixed side of the clamp.
remove top oil cooler bolt
intall clamp under bolt.
clamp bottle with cool cap down so you can drain it.
re-install hose after shortning on top of t.
http://www.buellxb.com/buell_images/3929_20090727194615_L.jpg
http://www.buellxb.com/buell_images/3929_20090727194556_L.jpg
1 remove bug screen
2 unplug one signal connector
3 feed half inch wrench and remove nut
http://www.buellxb.com/buell_images/3929_20090727194714_L.jpg
4 pull extension off,cut one connector off and un thread tube
http://www.buellxb.com/buell_images/3929_20090727194727_L.jpg
5 clamp tube in vice and saw side with more threads off with a hacksaw
http://www.buellxb.com/buell_images/3929_20090727194746_L.jpg
6 file or grind rough threads off,install thread part of tubeand crimp new bullet connector
7 fish wires in reinstall nut and tighten with box end 1/2 inch
repeat for opsite side
reinstall wind screen
http://www.buellxb.com/buell_images/3929_20090727194801_L.jpg
I had down the breather re route and was coughing oil out so i decide to improve it.
I thought hmm i like the look of the NOS little power shots
so go to gas station get a power shot.
i recommend you choke it down since than you get the bottle free.while your there buy or borrow a cap off the bigger nos energy drink(cause they look cool)
drill bottom of small bottle with a 5/16 place tee in bottom.
get a one inch hose clamp and drill a hole 1/4" in the fixed side of the clamp.
remove top oil cooler bolt
intall clamp under bolt.
clamp bottle with cool cap down so you can drain it.
re-install hose after shortning on top of t.
http://www.buellxb.com/buell_images/3929_20090727194615_L.jpg
http://www.buellxb.com/buell_images/3929_20090727194556_L.jpg