PDA

View Full Version : ECM Spy Download



Pages : [1] 2

Buellysses
08-17-2009, 03:35 PM
All;
Stevenc150 requested I post this link in its own topic...

ECM Spy Download (http://www.adampascoe.com/ECMSpy.html)

Disclaimer:
This is on my own personal web server/internet connection, so I can't make any guarantees as to its availability (or lack thereof) or the speed of the download. And I also want to make sure that all know, I have absolutely no ties to the ECM Spy project whatsoever. Only posting the download link to help fellow Buellers get the most from their bikes.

I can't believe I'm the only nerd on this site with a web server, maybe we can get a few others to post Download links?

Buellysses
08-20-2009, 06:22 PM
If anyone is bored...

Take a look in august, as of 8-20-09, 26 hits on the ECM spy download link. Accounting for 97.87% of outbound data. :)

Server Stats (http://www.adampascoe.com/webalizer/)

MR BUELL
08-28-2009, 06:08 AM
Does anyone know where to get ecmspy for palm?

Buellysses
08-28-2009, 02:31 PM
I don't have it, but if someone want's to e-mail it to me I'd be happy to post that as well.
e-mail me (pascoea@yahoo.com)

keithd
09-08-2009, 02:48 PM
I'd like to get a copy for Palm as well. Does anyone know the minimum hardware required to run ecmspy? I'd really like to be able to do datalogging and not have to use a laptop to do it.

Off-topic, does anyone know why old non-smartphone Paml PDAs sometimes cost more than new? [confused]
-keith

Stangxb12r
09-10-2009, 12:13 AM
Is this german??? Any way someone has ECMSPY in english?

Stevenc150
09-10-2009, 03:10 AM
----How To Choose English in ECMSpy----


Click Here first

http://www.buellxb.com/buell_images/2339_20090430212425_L.jpg

Then use this drop down box to choose English

http://www.buellxb.com/buell_images/2339_20090430212439_L.jpg

strmvt
09-10-2009, 03:33 AM
ok whats the secret to getting spy to work with Vista? I've gone and downloaded the cable drivers for vista and installed but it's not detecting a com port

Stangxb12r
09-10-2009, 03:42 AM
sweet thanks man

poppinsexz
09-10-2009, 11:04 AM
Buellysses,
Sent you a present.

Buellysses
09-10-2009, 09:49 PM
I got it poppin, thanks. It's posted on my server (same DL link at the top of the thread)

keithd
09-11-2009, 01:23 PM
Buellysses,

Thank you for hosting this!!

Does this work on any Palm PDA, or only for the Palm TX or E2? And does anyone know why old Palm PDAs cost more used than they did new?[confused]

Buellysses
09-11-2009, 10:34 PM
Keith;

No problem, and to answer your questions:

I don't know. And I don't know.

Glad I could help. ;)

tseldon
10-05-2009, 02:47 PM
is there an ecmspy for mac?

bronjeremy
10-05-2009, 05:46 PM
is there anything else i have to downlaod to make this work???

Buellysses
10-05-2009, 06:52 PM
Just the drivers from FTDI...

http://www.ftdichip.com/Drivers/CDM/CDM%202.04.16%20WHQL%20Certified.zip

bronjeremy
10-08-2009, 03:35 AM
do i need to save them or move them to a cirtin spot on my comptuer or just have them on it???

poppinsexz
10-08-2009, 09:32 PM
Save them to your computer. Then unzip them, When you first plug in your cable the computer will ask you for the drivers for the new device. You can then point your computer to them.

toddb3
10-09-2009, 02:28 AM
I'm using ECMSPY on my laptop to check for error codes and do TPS resets but am I hearing you right that a different version of ECMSPY is required for Palm? If so I'd like a copy also please! By the way, were can I download Megalog? I'm about to have my exhaust modified and would like to get into datalogging.

Stevenc150
10-09-2009, 04:30 AM
By the way, were can I download Megalog?MegaLog Viewer Download (http://www.efianalytics.com/MegaLogViewer/)


a different version of ECMSPY is required for Palm? - Top of the page, Buellysses added the download to that link already. ;)

toddb3
10-09-2009, 01:28 PM
I know that this has probably been discussed before but would it be worth it to install a wide band O2 sensor or just a waste of money?

Stevenc150
10-09-2009, 04:30 PM
Using the stock narrowband just means less accuracy and more Logging rides - but it's doable and better than just the stock map.

Or this thread has some systems you can purchase as well as more info: - Wideband 02 sensor for Tuning? (http://www.buelletinboard.com/forums/showthread.php?t=7744&highlight=wideband+sensor) Definitely wouldn't be a Waste of money.

Buellysses
10-14-2009, 01:18 PM
Hey all, I apologize, but the ECM spy download link is down. I had to re-install the OS on my computer and haven't got a chance to put the "stuff" back online yet. The computer this is hosted on is actually my media center computer in the living room. I'll have to upload a pic or two, I'm sure there are some other geeks on this site that would be amused. Hopefully this weekend I'll have a chance to get it fixed.

Thanks for your patience.

Buellysses
10-21-2009, 04:23 PM
Hey all, the link should be back up and running. Sorry for the delay, been kind of a crazy month.

I neglected to save the copy of ECM spy for the palm when I nuked my system, could someone please re-send it? pascoea@yahoo.com

Thanks
-Adam

poppinsexz
10-21-2009, 06:01 PM
Sent

Buellysses
10-21-2009, 06:06 PM
Thanks poppin, got it uploaded. Maybe I should back my **** up better...

poppinsexz
10-21-2009, 07:45 PM
No biggie, It's just good that you can provide this to others.

moto
10-31-2009, 04:47 PM
The download seems to be 1.12.1? Does anyone know where I can find 1.12.26 or newer?

Regards,

Derek

Cactuscamp
11-15-2009, 07:18 PM
Did you ever find a link to the V 1.12.26.

Thanks
Hap in AZ, '99 S3

Pockets
11-17-2009, 01:19 AM
Interested in trying this after doing the crankcase breather but the link isn't working.

Buellysses
11-17-2009, 03:49 AM
Pockets;
Sorry, I had to take my internet down for a bit. (was fixing a friends computer and didn't want it infecting my machines)

It should be up and running.

-Adam

Pockets
11-20-2009, 12:52 AM
Very cool. Got it! So....now how do I use it? Do you have a user guide? I'm VERY new to the whole tuning deal.

Stevenc150
11-20-2009, 01:53 AM
You can still get the tuning guide here: ECMSpy.com (http://www.ecmspy.com/download.shtml)

Pockets
11-20-2009, 06:46 PM
Thanks Stevec150! Are there any general rules when tuning for the first time? Big "do's & don'ts"?

Stevenc150
11-20-2009, 07:04 PM
Big Do: Save a copy of your EEPROM as-is. That way you've always got it to fall back on if something goes wrong. In fact, it'd be best to save 2 copies so if one computer goes down, you've still got it on a thumbdrive or disc.

Also, the key has to be on to work on the bike with ECMSpy, so pull the headlight fuse to save your battery.

Belz
12-04-2009, 11:10 AM
Thanks for the download!

Btw,
I've got a webserver too, two in fact, so if you want an alternate dl location, let me know and I'll put them up asap!

J.

WULFGODSXB
12-24-2009, 06:56 PM
buellysses you are a life saver have not been logged on in long time and could find ecmspy any ware. my computer crashed and cd drive quit working lost every thing and could not reload ecmspy. great job thank you.[up][up][up][up]

mcdonald1983
01-04-2010, 04:43 AM
This I'm sure will sound like a dumb question for most of you but can ecmspy work with a Harley Sportster?

Bob1320
01-17-2010, 06:21 PM
I'd like to download ECMSPY for my PC, but the link isn't operable. Can anyone help me please?

jcbassomatic
01-18-2010, 12:37 AM
I'm interested too. I found a torrent for v1.12.1, but I'd like to have a more recent version.

Thanks!

Buellysses
01-18-2010, 02:07 AM
lol, it never fails... I break my computer and someone tries to DL the file.

I should have it back up in a couple hours.

Buellysses
01-18-2010, 02:49 AM
Ok, it should be up and running. Please let me know if it's not...

Just some details, cause I enjoy showing off my epic nerdy-ness:

The server is actually a media center computer, serving multiple purposes. It main use is as a media center running XBMC installed on top of Ubuntu 9.10. I also use it to browse the web, as a file server, and as a web server. It's an Intel Atom 330, with Nvidia's ION chipset (Zotac ION-ITX), 200GB HD, 2GB of shared RAM (512 for video), gigabit lan, onboard HDMI. In the near future I plan on installing a couple of 1.5TB hard drives (mirrored raid) for video/music/file storage, and putting the thing in a respectable case. The recent outage was the result of me switching back to a Ubuntu system instead of Kubuntu. (KDE was being a huge pain in my side)

Here she be:
http://www.buellxb.com/buell_images/2120_20100117203800_L.jpg

This is my other baby, the main reason for building the computer: 63 inches of pure bigscreen goodness.
http://www.buellxb.com/buell_images/2120_20100117203819_L.jpg

And just for a laugh, this is the router I use: (no, I'm not joking. I used to have a Netgear router but it kept freezing up, so I tossed this beast together. Its an old P3 with 512MB of ram running IPCop. She pulls about 1/3 of an amp at full load. Maybe some day I will find a case for her, but for now she just sits there screwed to the wall)
http://www.buellxb.com/buell_images/2120_20100117203738_L.jpg

Stevenc150
01-18-2010, 04:13 PM
Buellyses, the download you currently have is ECMSpy 1.12.26.
I've acquired the latest version which is 1.12.27
If it's not too much trouble, would you update the download from your site to be this newer version?
I'll email it to you if you agree.

Again, thanks for hosting this. [up]

Buellysses
01-18-2010, 04:45 PM
no problem. Send her over. pascoea@yahoo.com

cap44
01-28-2010, 04:21 PM
I haven't been able to find description or instructions on the cables. Anyone have any info on where to get them or how to build them??

Stevenc150
01-29-2010, 02:26 AM
Anyone have any info on where to get them or how to build them??
DIY ECMSpy Cable (http://www.ecmspy.com/steckermontage.shtml) - Buy ECMSpy Cables (http://xoptiinside.com/buell_store)

bronjeremy
01-30-2010, 06:38 PM
I have herd things about Ecm spy not working with Vista or windows seven, is this true? or any way to download a patch or something to make it work?

valet
02-03-2010, 11:13 PM
THANK YOU :)

willyam1
02-23-2010, 06:21 PM
Thanks for the download! I have been reading about this and people are talking about a driver download. What is the driver for and do I need it? Where can I get it thanks.

Buellysses
02-23-2010, 10:20 PM
Go to ECMSpy.com and look for the FTDI (mfg. of the cable) drivers.

ruben78207
02-24-2010, 01:17 AM
Awesome help guys, i cant wait to start tweking my baby.
thank you

willyam1
02-24-2010, 05:51 AM
Do I want the driver for VCP or D2XX? Then version 2.06.00 for the device FT232R?

Stevenc150
02-24-2010, 02:04 PM
Have you tried connecting to the ECM without the driver? Most don't need it.

r1aven
02-24-2010, 10:44 PM
i bean asking around but cant get a straight answer about this, but does this work for a 2009 xb12r??

Pockets
02-24-2010, 11:08 PM
No. 08+ won't work with ECMSpy....yet. There is a new version in the works, but it's not out yet. From the factory, the 08+ bikes have a learning ECM that will compensate for exhaust OR intake mods, but not both.

r1aven
02-24-2010, 11:51 PM
DAMN! i have a k&n filter and a jardine gp-1. also did the breather mod.... back fires kinda worry me... does it quite often on the decel.... can anyone help me?????? plz...

Pockets
02-25-2010, 12:26 AM
Backfires are normal to some extent. My 09 XB9SX does it on decel and I only have a DIY pipe and no filter mod. Getting a tune done by an actual shop or getting a EBR ECM are probably your only options right now.

Stevenc150
02-25-2010, 03:12 AM
- '08+ Buell Tuners Ohio Sportbike (http://www.ohiosportbike.com/phpBB3/viewforum.php?f=7&sid=c4c83aa47a63fb86f53f56a2788b506e) and JTS Performance (http://www.jtsperformance.com) - seem to be a few of the immediate options.

NOMADIC
02-28-2010, 02:34 AM
Will I be fine without the remap on an 06 9sx??

I am currently running a Drummer, Air-box delete w/k&n, breather re route and Buell's platinum plugs.

Will I be running lean?
I don't feel like changing plugs every 1000 miles.

If so.. Anyone willing do do it for me in the Chicago(ish)area for some $

PM me if you are willing to do me the favor :D

NOMADIC
02-28-2010, 06:23 AM
NEVERMIND

I just bought a new race ecm on ebay!

twistedrose
03-03-2010, 04:02 PM
Thanks Buellysses! I appreciate you keeping this available! +1

Defender88
04-02-2010, 03:32 PM
how can I get a remapp for my bike?

Stevenc150
04-02-2010, 04:19 PM
Depends on year/model

Defender88
04-03-2010, 05:04 PM
Im looking to get one for my 03 xb9s, jardine slip on air box mod. iridium plugs, 8s

Realtwin
04-06-2010, 02:54 PM
Hi, I'm new to this forum but had my xb12r for five years now. I'm trying to download the ecmspy software but the link is not working. Can anyone e-mail me the latest version for me to use. Would be very grateful.
Regards
Andrew

Stevenc150
04-06-2010, 04:30 PM
Can anyone e-mail me the latest version for me to use. Would be very grateful.PM me with your Email address. ;)

Buellysses
04-07-2010, 02:16 PM
Just a note, looks like we set a record last month. 545 hits, 3466847KB (3.306 GB)

That works out to 112MB/Day (roughly 12 copies per day of the program) in March! I guess it's spring time!

Defender88
04-07-2010, 10:53 PM
yes,but how do we get race maps for our mods?

Stevenc150
04-08-2010, 01:35 AM
- ECMSpy Maps (http://www.buelletinboard.com/forums/attachment.php?attachmentid=4570&d=1265426082)
;)[up]

Buellysses
04-09-2010, 02:12 PM
Hey Stevenc, I was told there is a more recent version out there then what I have posted for download. Any chance you can send me the most recent version?

Stevenc150
04-09-2010, 04:17 PM
I think we did this already right? Newest version I last heard of was 1.12.28 and I believe that's whats on your Download.

jmcrutch
04-09-2010, 04:21 PM
Would anyone be willing to lend me their cable so I can do a TPS reset? I'm in Jupiter, FL.

martinjansson74
04-09-2010, 04:36 PM
In need help!!!!!!
I have a XB12R and just got ECM spy. I installed the SW and connected to the Buell, no problem. THen i feetched the eeprom to be able to restore. I did not burn the eeprom But now the bike hardly starts? Anynone had the same problem?
I run the 1.12.1 ECM SPY SW
Please help me! Do anyone have original maps for a XB12-04?
I have the eeprom files and screenshots that i can send and someone could take a look at them!

Best regards
Martin

Stevenc150
04-09-2010, 04:45 PM
Do anyone have original maps for a XB12-04? 4 Posts up from yours, click the "ECMSpy Maps" link.


I have the eeprom files and screenshots that i can send and someone could take a look at them! Start a new thread would be better for future reference and you'll get more help also.

Edit: To start your own thread, Click Here (http://www.buellxb.com/Buell-XB-Forum/General-Motorcycle-Chat) and Go to bottom of page. Also, here's How to Post Pics on BuellXB (http://www.buellxb.com/Buell-XB-Forum/Technical-Issues-with-the-Forum/How-to-Upload-Pics-on-BuellXB.com)

BumbleBeeBuell
04-22-2010, 01:42 AM
Does anyone have a link to where I can get the race fuel and timing maps for a 2003 xb9s. I had got a file with the ECMSpy software but it is incripted on notepad and I can not make sense of it, when I backed up my eeeprom it came out in the same format. The progam works great, however I am looking for the maps to plug and chug the numbers so I can ride this bike the way it should be. Thanks and sorry if its an old question.

dallasb
04-22-2010, 01:46 AM
while in ecmspy click file...open eeprom...and select the file...it will open it just fine

flaya564
04-22-2010, 02:11 AM
Was there a mac/apple version made?

Buellysses
04-22-2010, 01:32 PM
Not that I'm aware of.

chevnut55
04-26-2010, 09:38 PM
i just bought the cable and program and i cant get it to do anything,the bike is linked the dash bord gauges come up on the screen and work but will not let me save or download any programs. i do not know much about computers,anyone know how i can do this? a step by step in english would be helpful.

bguinn
04-26-2010, 11:47 PM
Did you try pressing the button with keys on it?

Also, you may have to go to Options: Communications and set to autodetect.

Do you have the VCP driver installed?

chevnut55
04-27-2010, 12:57 AM
thanks for your help.yes i did press on the key buttons,and evey thing else. it seemed to do eveything but when the stuff i needed to press on would not work at all,the arrow dissapeared when i moved on it. i did the auto detect,it found the port with no problem.not shure about the vcp driver,but i installed everything it let me install after a few hours.

chevnut55
04-27-2010, 01:18 AM
all the keys do is show a small box that says closed loop.i do notice im not getting a fetch maps or burn maps like in the instructions .what am i doing wrong here?

bguinn
04-27-2010, 01:20 PM
Turn on the bikes key switch, turn the run switch to on. No need to crank. Make sure your cable is plugged into the diagnostic plug till it latches. If it is showing you the com port you already have the driver installed. Press the keys button. You should be getting information up on your general screen. Meaning all the white spaces should be filling with numbers.

dallasb
04-27-2010, 02:12 PM
Make sure that you have ecmspy set for the professional setting. To do this go to view....then just click professional. That should fix your problem.

bguinn
04-27-2010, 02:14 PM
yep forgot that step

Stevenc150
04-27-2010, 02:19 PM
...and it's good to pull the headlight fuse so you don't drain your battery.

Ryan
04-27-2010, 02:37 PM
Hi all. Just joined the forum and I think I'm backwards now. I downloaded the ECMSpy program listed at the beginning of this thread from the webserver, installed the program, followed the thread along and switched the language to English.
However, when I tried to download the drivers, the link said the filename wasn't there and linked me to similar filename on the server? I didn't download that. Then I read where I may not have the newest version of the ECMSpy program?
I'm a little lost, and in all honesty didn't try to read through ALL the posts. Thought I would skip to end here and get the most up to date information.
Help me XB-Wan, you're my only hope

chevnut55
04-27-2010, 05:27 PM
i set it to pro. settings and fetch program off ecm and burn to ecm cam up,i did bolth but i do not think that i installed the race program. it is on my computer but i cant get it to where im doing the work pluged into the bike. how do i bring up the race program? i now can retreve codes and i think what i did was remove the stock program and install it back on .i wish i had just bought a race ecmthe cord id only $50. but i had to beg for a lap top,and im 3 days into this.also,how will i know if the race program is installed?

Milehighturbo
04-28-2010, 07:05 PM
can someone send me a copy of ecmspy??

dan.martinez@comcast.net

where can i get the cable??

dallasb
04-28-2010, 07:19 PM
go the the first page of this thread to get the software. You can get the cable through xoptiinside.com or ebay.

chevnut55
04-29-2010, 12:34 PM
ok,i did not know i could copy and paste over the old map,ill give it a try. how do i save my old map? it does not show how to save to disc or anything.

BumbleBeeBuell
05-01-2010, 01:12 AM
So im waiting for my laptop charger to come in and haven't been on in a while, but I should oopen another window and load the race eeprom and steal the fuel and timing maps from it and plug those into my stock map window? From what I have read this should be correct so I do not fry my my brain. is this right? I never knew there were different race eeproms until reading this forum, but it does make sense now.

chevnut55
05-03-2010, 07:05 PM
my bikes all screwed up now. i give up..im not a computer wizz,i need a screwdriver. its now poping,skipping,backfireing and stalling,i have to find away to get it to a dealer or someone who knows what they are doing and just hope i did not damage anything.

96zj
06-17-2010, 08:34 PM
Link for the Ecmspy download is not working, anyone have a copy? Or know if it's just down temporarily?

Stevenc150
06-17-2010, 08:43 PM
PM me your email address.

Buellysses
06-18-2010, 05:01 AM
Yeah, my router took a **** on me. It's been a long week, haven't had time to dink with it. It will be back up eventually.

YJBoomer
06-18-2010, 12:05 PM
Can someone send me the Ecmspy. It's not working right now. Going to be sending Randy my exhaust this weekend and would like to get a little familar with it.
Email: jeepn_boomer@yahoo.com

Plus what cable should I get for my xb12r?

YJBoomer
06-18-2010, 12:09 PM
There is a uncerscore in my email, jeepn_boomer

Buellysses
06-18-2010, 05:42 PM
It's back up and running... bad network card in my router. GRRR.

Hammel13
06-19-2010, 03:05 PM
Okay Buellysses i went to download the drivers from FTDI but it said The document name you requested (/Drivers/CDM/CDM 2.04.16 WHQL Certified.zip) could not be found on this server. However, we found documents with names similar to the one you requested. Available Drivers /Drivers/CDM/CDM 2.06.00 WHQL Certified.zip Should i download those drivers or do you have another link. Thanks for the help as well as hosting the download. Thanks

YJBoomer
06-19-2010, 04:27 PM
Thanks Buellysses

96zj
06-19-2010, 06:10 PM
Thank you!

Buellysses
06-20-2010, 08:46 PM
You just need the drivers from FTDI. I'm not hosting those on my server.

FTDI Link (http://ftdichip.com/Drivers/CDM/CDM20602.zip)

Hammel13
06-24-2010, 05:20 AM
I appreciate the help Buellysses. thank you.

walrus2004
06-24-2010, 01:38 PM
I extracted the ECM Maps and there is nothing under the folder for Stock 2004 XB. Every other year has a mapping for stock and race, except for the stock 2004 folder is empty???

GSXdoubleR88ciNINJA
06-24-2010, 02:01 PM
They are the same 04-07.

walrus2004
06-24-2010, 02:01 PM
sweet... thanks! so I can use the stock mapping from an 05 for my 04?

Stevenc150
06-24-2010, 09:10 PM
Mapping, yes - just don't try to flash the whole EEPROM. Just enter maps and other settings over to your stock EEPROM manually using the '05 to go by.

walrus2004
06-25-2010, 06:50 AM
anyone know of a step-by-step showing me what to do for this? or can someone walk me through it.

All I am doing is replacing my TPS sensor, so I only need to do what is necessary for that. i am a little worried about screwing something up.

walrus2004
06-25-2010, 07:03 AM
referring to my last post... this is the process I was wanting. It still sounds a little tricky (below). But is this the only process I need to do when I connect the bike to ECM Spy after installing the new TPS sensor?

11.1 How to perform a TPS reset
(This chapter applies for models with DDFI-2 injections only. Models from 2008 and later are usually
equipped with DDFI-3 and do not require a TPS reset done by a computer any more.)
On the front left of the engine, between the airscoop and the engine, is the idle adjust screw, which
simply adjusts the butterfly in the injector to allow air through for tickover.
• Connect the bike with the computer
• Turn ignition on and set kill switch to the run position
• Turn out this screw until the throttle voltage doesn't decrease any more
• Keep winding the screw two additional turns
• Close the throttle with light clockwise pressure on the throttle grip. The butterfly is fully closed
if it sticks inside the manifold. It's essential, that this is done whith care, as the TPS reset
needs to be done with the butterfly fully closed!
• Click the "Reset TPS ..." button to perform TPS calibration
• Turn idle adjustment cable clockwise until TPS degrees read 5.2 - 5.6 degrees. This setting is
just to make the engine start and needs to be adjusted to correct idle speed with a warm
engine afterwards.
• Run vehicle until engine temperature is at least 140 °C or 285 °F
• Set idle speed to 1050-1150 min -1

walrus2004
06-25-2010, 07:09 AM
well... let me go ahead and eat my words! found this on youtube...

http://www.youtube.com/watch?v=i33__Qkvhn4

Thanks a bunch BuellXB, this video should help me a ton. Awesome job!

brightbuell
06-25-2010, 08:36 AM
ok, my question. I have a stock 09 firebolt ECM. I now have a voodoo exhaust and breather rerought mod. so lessrestricktion of air going in and less back pressure going out. I want to change the way my bike thinks to match the changes for more power etc.

Can i remape my stock ECM, if yes what do i need and where can i get it. I have a pc with windows 7. Can anyone help I want my bike to run its best.

walrus2004
07-04-2010, 02:32 PM
im stuck... cant get my computer to recognize the bike using the cable. perhaps i didnt install the driver correctly? can anyone offer some advice asap? thanks

Arkitek
07-04-2010, 03:44 PM
Hi walrus2004, try these drivers out...
http://www.ftdichip.com/Drivers/CDM/CDM%202.06.00%20WHQL%20Certified.zip

Its a direct link to the file. Go ahead and install the driver package and then give it a shot. Make sure you select the correct com port on your computer. You may have more that one so try them all.

BPlass
07-04-2010, 09:34 PM
did not know i could copy and paste over the old map,ill give it a try. how do i save my old map?

also would like this question answered, thanks.

Ben

walrus2004
07-05-2010, 08:56 AM
how do i install the driver package? I have it downloaded, but when I extract it, there is no installer or anything. someone got screenshots to help out this poor guy?

Arkitek
07-05-2010, 09:35 AM
Oh sorry i forgot there was no installer with that one...

Plug in your cable to the bike and your computer. it sounds like you'll get a notification that you do not have incorrect drivers.

Right click "my computer" or computer if you have win7 or vista
click "manage"
expand "device manager"
look for "ports (COM&LPT)
If you have the incorrect driver it will have a yellow "!" over the icon but otherwise look for usb/serial... i think...
right click on it and "update driver"
Select browse computer for driver software or "i will choose what driver to use" (i think that winXP's option.
Go to the extracted folder of the drivers and select the driver in that folder and hit ok.
Click finish and viola!

Let me know if that helped you out or otherwise let me know what OS you are using.

walrus2004
07-06-2010, 06:22 AM
i have tried both 64-bit windows 7, and also 32-bit windows XP... both will not recognize the driver. I also tried to let the windows 7 machine search online, but still no luck. quite frustrating cause I got my new TPS sensor in and am just wanting to do a TPS reset, because I have to, right?

Buellysses
07-06-2010, 04:35 PM
Fair warning, the download link is going to be broken for a while. I'm adding some storage space (bestbuy has 1.5TB hard drives on sale for $80) and upgrading to Ubuntu 10.04. I'll give a shout when it's back up.

walrus2004
07-13-2010, 06:14 AM
I put in a new TPS sensor on my 2004 XB12S. I wasnt able to get ecmspy to link up to my bike correctly so I wasn't able to do a TPS reset.

Is it absolutely necessary to do a TPS reset when replacing the sensor? Cause I started the bike up and it seems to be idling correctly and running fine.

If I have to have it reset than I can take it to the local HD shop, they quoted me $43 to do a reset.

Thanks.

Arkitek
07-13-2010, 06:53 AM
Hi Walrus2004, did you try these drivers?
Direct download link...
http://www.ftdichip.com/Drivers/CDM/CDM20602.zip

I didn't have any luck with these but they are the latest version and maybe they can help you. I'd hate for you to have to go to the dealership and have to pay for that. I think the best thing to do is try to test out a few drivers. Question though, when you attach the cable to the bike do you get a notification that the device can't start or incorrect drivers?

As far as the need to do a TPS reset i'm not sure on that.

walrus2004
07-13-2010, 08:02 AM
My computer recognizes that a cable has been inserted, however it comes up with the notification that it could not locate the driver.

I have tried pointing it to the driver, and I have used the download you have listed. I have tried it on windows 7 and windows xp. Both cannot locate the driver. I tried to also let windows 7 search the net and had no luck that way either.

walrus2004
07-13-2010, 08:03 AM
maybe someone can just explain to me what the TPS sensor does. From what I understand it regulates the idle position? Cause that is all that is adjusted when you do the TPS reset right?

Stevenc150
07-13-2010, 09:21 AM
The TPS reset sets your throttle baseline. The TPS sensor itself tells the ECM where the throttle is and the ECM references the maps to deliver the fuel at the correct intervals. That's why a faulty TPS reset leaves the bike running like crap because the "baseline" is off, the ECM is giving the wrong amount of fuel for the wrong throttle position, throwing the air/fuel ratio off so bad you get a bad burn.

lokatwhaticando
07-19-2010, 08:04 PM
HElP I can't get the driver for the cable to work on my laptop I have Vista. I have all the maps and EcmSpy and the cable. I just need the driver to work. SO if anyone can help me thanks. I new to the forum thing and to BuellXB. I have a 2003 XB9S lightning:D

bajaraider
08-18-2010, 09:39 AM
I am thinking about getting myself setup to play with the maps on the bike. Anything major I need to be aware of, at least as far as what I need?
Cable, software, drivers... anything else?

lifeisafractal
08-18-2010, 10:15 PM
This is my first post here, just got an '07 XB12Scg and love it. I want to start playing with my fuel mapping after I finish a few other basic things. Any one got the Linux files for ECMSpy? I've searched the forums and the net and they don't seem to be out there, but one of you guys has got to have them.

michalcz2
01-31-2011, 04:29 PM
Could someone be so king and send me ECMSPY(windows) to my email: buka2008@interia.pl

Thanks Mike, Poland

BPlass
01-31-2011, 09:02 PM
I was wondering (sorry I haven't researched it on here yet) do you have a version of spy that would work on Linux? I'm running Linux mint/ubuntu.

Stevenc150
02-01-2011, 09:43 AM
Could someone be so king and send me ECMSPY(windows) to my email:Download is in the 1st post on the 1st page of this thread - unless the servers are down.

michalcz2
02-01-2011, 02:05 PM
everytime I try servers are off :(

Buellysses
02-01-2011, 02:58 PM
Sorry, my apartment flooded. I had to move all my computer equipment. It's not like I'm running a major ISP, it's just a hobby computer that I use for experimentation with PHP. The goal was never 100% up-time.

Back online ASAP, sorry guys.

Stevenc150
02-01-2011, 10:08 PM
No problem Buellysses, you offer it free for Buellers, with no reward to you, so props to you bra. [up]

Buellysses
02-02-2011, 03:39 PM
Wow, I just re-read my post... It sounds kind of bitchy. lol

I must be suffering from the PMS that was referenced in a different thread. I went down and looked at my bike in the shop today, then looked at the temp outside (-26 degrees) and almost cried.

Buellysses
02-02-2011, 03:42 PM
I was wondering (sorry I haven't researched it on here yet) do you have a version of spy that would work on Linux? I'm running Linux mint/ubuntu.

There is not native linux version of the program available, but you may be able to get it working under WINE. A quick google search says that it's possible.

WINE (http://www.winehq.org/)

michalcz2
02-06-2011, 05:08 AM
link in first post works now [up]:D

ich
02-06-2011, 05:53 AM
There is not native linux version of the program available

really? or is it, that there's no stolen version available?

Buellysses
02-06-2011, 09:08 AM
As far as I'm aware, there just isn't a Linux version out there.

Server is back up again, btw.

nativeXb12Rbuell
02-06-2011, 06:39 PM
buellersdownunder.comEcmSpy-and-Linux (http://www.test.buellersdownunder.com/showthread.php?1466-EcmSpy-and-Linux) acorrding to them it workswith wine & linux..

google search ecmspy & linux info (http://www.google.com/#hl=en&safe=off&&sa=X&ei=YlVPTczJJMO88gbewLnMDg&sqi=2&ved=0CG8QBSgA&q=ECMspy+Linux+version&spell=1&fp=3ef657eb4d8c6f0d)

xoptiinside.com says (http://www.xoptiinside.com/downloads)You can run this in linux or ubuntu under wine if you choose. Even run it in boot-camp in mac. Your not locked to windows.....


hope thats helps you I never use linux , I use an old laptop running windows xp for ecmspy, why not borroow a friends old pc or laptop, or better yet find an old pc or laptop on ebay or yard sale and then wipe the hard drive and reinstall windows XP on it to run ecm spy or run vista or XP on an old or extra hard drive out of a laptop or desktop pc.

bc2003uga
02-07-2011, 07:49 AM
ordering my cable next week, just downloaded the program. the bike needs some adjustments for sure. THANKS!

Buellysses
02-07-2011, 03:07 PM
http://lmgtfy.com/?q=ECMspy+Linux+version

BigRedonBlack
02-07-2011, 03:16 PM
so where is everyone buying there cables from?

Stevenc150
02-07-2011, 03:50 PM
- Xoptiinside.com (http://www.xoptiinside.com/buell_store) is a Bueller and a reliable source. $38 shipped.

- American Sportbike (http://www.americansportbike.com/shoponline/ccp0-prodshow/A9317.html) has them also.

- Ebay too ,but as always, at your own risk.

Edit: Added Links

2tall
02-08-2011, 12:13 PM
Good evening all,
I'm looking for some advise on how to stop the large amount of popping I get on the overrun and de-acceleration.
I have an 09 XB12ss and fitted a Stealth exhaust and got ecmspy, tunerPro etc and managed to download my ecm. Once down loaded I adjusted the front and rear fuel maps on the lowest row, see below

http://www.buellxb.com/buell_images/3977_20110208060300_L.jpg

http://www.buellxb.com/buell_images/3977_20110208060208_L.jpg

By reducing the value to 10 I was advised this would stop the popping but doesn't seem to have done very much.
Anyone out there know what else I can do???

Many thanks
Martin

Gazsi
02-11-2011, 11:34 AM
Hello

Help please!

Sorry!
Translator program, because I can not write in English.

I can not connect to the motorcycle ecm spy program.
Why can not it work?
Program Version:
1 http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638145
2 http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638146

Cable and the computer:
http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638144

Issue:
http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638147
http://www.sportmotor.hu/motoros_kepek/motor/?dr=41989&cmd=pic&id=638148

Please help

Thank you

Peter Hungary

Gazsi
02-11-2011, 11:40 AM
I forgot

When connecting
motorcycle engine light flashes

Thank you!

MotoX6
03-01-2011, 11:57 AM
bump, does anyone know where i can get a ecm map for a 2003 xb9r with a jardine and high flow? stock ecm by the way.

Stevenc150
03-01-2011, 04:08 PM
Our "sister" website is called BuellMods.com. It has almost all year/model, stock & race maps available. Signup is Free and then you'll have full access to view them. - BuellMods Download Area (http://mods.buellxb.com/index.php/viewcategory/47.html)

MotoX6
03-01-2011, 04:11 PM
ok, i did this and would you load the whole race eeprom they have onto the ECm or just the map?

OR do i need to tweak their race eeprom before burning it onto the ecm

prostreet
04-18-2011, 09:00 PM
So, I have an old laptop with windows 98 on it will it work with this program?

Koonsboy
05-01-2011, 08:46 AM
I am wondering if the maps are good at the top of the main page under downloads,. I see there are custom maps, if these are good maps and I download them how do I configure them into ecmspy. Also how would I load them into the bikes ECM.

Damn_Girl
05-01-2011, 09:10 PM
Thanks for this Buellysses! I'm sick of putting up with the dealer's sh!t when I need a reset. I don't think the bastards even did the last one but they sure were quick to charge me. Again, thanks so much. Now onward to research these cables you guys are talking about... O.o

Stevenc150
05-01-2011, 09:17 PM
Go to ECMSpy.com and download version 2 of the manual - it's all in there. Also there's a DIY vid on here about flashing mapping to your ECM, but I'd recommend reading the manual first to get a "feel" for the program and how it operates.

99 X1
05-10-2011, 07:01 PM
when i try to open up ecmspy, i get an error 'tabctl32.ocx' is missing or invalid. any ideas on whats going on? windows 7 starter in a netbook if that matters.

thx

robbuell
05-25-2011, 06:54 PM
when i try to view the remapping video on here it says private video could someone help

Stevenc150
05-25-2011, 08:45 PM
Try this one: Copying a Race map to stock ECM (http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/How-not-to-copy-a-race-map-is-more-like-it...).

robbuell
05-26-2011, 03:03 PM
thanks stevenc150 that one works

robbuell
05-26-2011, 04:53 PM
can u buy a race mapp to flash for specific mods

MotoX6
05-26-2011, 04:55 PM
Some are free on buellmods...

robbuell
05-26-2011, 06:23 PM
i see those but they dont specify mods need them 04 xb12s with k&n open airbox and a jardine pipe

MotoX6
05-26-2011, 06:36 PM
Well hit me up when ya find one cuz I have the same mods on an 03 and need a map. The race is the best I could find for now....without tuning of course

robbuell
05-27-2011, 05:38 PM
the race from here if not do you have a copy of it you could email me 04200robert@gmail.com you havent tried tuning it

robbuell
05-27-2011, 05:39 PM
what are the altitude and avg. temp where you live

MotoX6
05-27-2011, 07:42 PM
yeah i can send you the race map for 04, i havent ever datalogged, im not exactly a computer nut but i figured out ecmspy a little bit.

also-im in Iowa so the average temp is nothing average its been 48 and 90 degrees in the last two weeks! haha but it seems to run fine either way, i think the race map is better than the stock at any altitude.

MotoX6
05-27-2011, 07:49 PM
I sent you and email with the 04 maps by the way and you need to make sure that the ecm's match up correctly so that you don't brick the ecm! -Just thought of that to add

robbuell
05-27-2011, 08:23 PM
waiting on my cable tried reading the ecmspy manual not to easy to understand but i figure ill give it a try the diy video im gonna watch about 20 more times since there is no sound makes it harder to comprehend so all else fails ebr opens soon buy a race ecm what do u mean make sure the ecm's match up

robbuell
05-27-2011, 08:24 PM
sorry forgot thanks for the mapps

IYAOYAS
05-30-2011, 06:24 AM
I am not able to get my bike to communicate at all. I feel the smoke rolling out of my ears as I pour over the various threads regarding tuning. I have an 09 XB12 and can not even get mono to retrieve my eeprom.
All I get is the following.

An error occured. Failed to get type info from ECM.
Please check message area for details.

Serial Device: COM1
Error: exiting - failed to get ECM Type!
Open serial device COM1.
SendRequest(): Error: caught timeout exception
Error: transmission failed - return code -1
Close serial device COM1.
Error: exiting - failed to get ECM Type!
Open serial device COM1.
SendRequest(): Error: caught timeout exception
Error: transmission failed - return code -1
Close serial device COM1.

uly luigi
05-30-2011, 07:03 AM
08's and newer, you have to have the "PAY FOR PLAY" version of ECM SPY, I think, I may be wrong, but I do know TUNERPRO RT works for our DDFI3 ecm's








'

TheyCallMe
05-31-2011, 11:00 AM
What is the newest version of ECMspy out there... i have 1.12.26 but im not sure if i need a newer one. Something isn't working correctly...

Buellysses
05-31-2011, 01:32 PM
I have it on good authority that the download link provided is the latest version.

robbuell
05-31-2011, 06:17 PM
how many people make race ecms just got my cable for ecm spy today went to remove ecm thinking it was stock and to my suprise in bold white letters
FOR RACE USE ONLY does this mean i can use my jardine and do the breather delete and maybe get away with just a tps would like to find out what brand it is

dbraun30
06-03-2011, 06:14 AM
Is the server down?

Stevenc150
06-03-2011, 09:56 AM
May be, try Buellmods.com - "Downloads" section.

jakestolar
06-12-2011, 08:49 AM
So the only way to get the program for my 09 xb12 is to pay?

uly luigi
06-12-2011, 09:47 AM
If you want to use ECMSPY, yes you have to have the Pay For Play version, or you can use TunerPro for free, well the developer asks for a 30 dollar donation to remove the nag screen at start-up, but it is fully functional, and will work on all versions of Buell ECMs

jakestolar
06-12-2011, 10:02 AM
is tunerpro a good product?

uly luigi
06-12-2011, 10:19 AM
From what I have gathered, here and elsewhere, ECM Spy is easier to use, but Tuner Pro is a lot more powerful, it gives you complete control over every aspect of the ECM, if the ECM controls something, you have control over what it does, I am by no means an expert, I have yet to do any tuning with either of them, but when my EBR ECM comes in, I will start learning Tuner Pro, on my stock ECM

jakestolar
06-12-2011, 02:11 PM
Do I need Tunerpro or Tunerpro RT?

Baruch_RR
06-25-2011, 05:28 AM
can anyone post a link for the 2008 and up models
i cant seem to find the pay for play ver

Stevenc150
06-27-2011, 09:31 AM
ECMSpy Activation (http://www.ecmspy.com/swreg.shtml)

tunerbuilder
07-26-2011, 01:55 PM
Hey folks! I just purchased a 05 xb12r. It has a few mods such as drummer exhaust, k&n intake filter, cut airbox mod, heat wrapped pipes, breather mod with oil/ air separator, AND a dobeck performance efi (junk). I am in dire need of a copy of EcmSpy. I have tunerpro and megalogviewer and am currently becoming more and more versed in the efi language thanks to a Megasquirt Ecu that I have just completed and am in the process of tuning (and quite a process it is).
If anyone could please PM me with some information I would be uber-appreciative.

Thanks guys

P.S. I am sure to update all of my user files now that I have set up an account with BuellXB forum. However with the bike running as bad as it is, this dobeck TFI's Crappy insults to my ecu, and the weather being super nice out... well im full steam ahead on this ecmspy fix.

Again thanks guys.

Stevenc150
07-27-2011, 10:50 AM
BuellMods.com - Go to "Downloads" section

Buellysses
07-28-2011, 08:53 PM
Link is working again...

Sorry for breaking it.

ashton155
08-12-2011, 02:48 PM
What all do i need for my race ecm on my 06 buell xb12r?!

ashton155
08-12-2011, 02:50 PM
For set up that is

tunerbuilder
08-23-2011, 10:41 AM
so i downloaded a race map for my bike, but im leery about installing it. I really need a map for an 04 xb12 with drummer,heat wrap,cut air box,breather mod, and k&n. if anyone can send me a tune thats even close... i can run with that. Also noticed that my bike is an 05 but has an 04 ecu name... ends in "gb" rather than "ib"... wierd.

never the less I am making progress. my windows 7 tablet seems to be rocking out all this software so thats a super win. already did the tps reset so woot! and now its all down to the tune.

any help would be super appreciated. thanks.

Reg93780
02-25-2012, 07:35 PM
Having a little trouble here. I have read through the thread on converting a race map to work on a stock ecm but can't get it to work. I think I have a decent grasp on the concept but just can't get it to work. I have noticed in screan shots on here that my screan looks different and other things like I can't set a minimum AFV either. The problem I think I have is my version of ecm spy is 1.7.8. Could this be the problem? I have tried several times over the past few days to follow the link on the first page of this thread but can't connect. I'm getting a little frustrated and would greatly appreciate some assistance.

storeytime
02-29-2012, 06:57 PM
Where can I get a cable? Hopefully cheap.

Stevenc150
03-01-2012, 07:42 AM
Xoptiinside.com or Ebay. Most of the time, better off just getting it from Xopti though.

netty2424
03-01-2012, 05:48 PM
I've read this thread over and over and all of the direct links are no longer good as I'm guessing they are out dated.

I can't get any communication into the software. I've tried all recommendations on this thread, but still nothing. I go into communication and find the com18 but it fails each time.

can anyone offer the direct link to the driver for windows xp?

I thought I had the correct one, but guess not.

jdaly9056L
03-05-2012, 12:25 PM
I am in the same boat as netty... Any way we can get some help with the drivers. I too have xp. OP thank you for the download asw well as all the help keeping your server up and running.

kab
03-05-2012, 01:47 PM
I have a auto driver install that worked on my laptop with windows 7 and has worked for other members that have windows XP. Anyone needs it pm me, you will need a Hotmail email address because Gmail won't allow. Exe attachments even when they are zipped or compressed.

jub_69
03-05-2012, 04:33 PM
Does any one have the race ecm map for download?

kab
03-05-2012, 04:39 PM
What model year bike?

jub_69
03-05-2012, 07:59 PM
Its a 2007 1203 stt

netty2424
03-05-2012, 08:09 PM
Kab, pm sent! Thanks!

oox1
03-11-2012, 06:49 PM
Can anyone send me a copy of ECMSPY my computer took a bath in the varsol tank any help would be appreciated Teutscha@aol.com thx

jcrosby4288
03-19-2012, 06:20 PM
does any one have the ecm spy for a 2008 xb12 r buell?

ich
03-19-2012, 09:26 PM
http://www.ecmspy.com/mydownloads.shtml

ich
03-21-2012, 03:15 AM
http://www.ukbeg.com/forum/viewtopic.php?p=185124#p185124

konarider94
03-21-2012, 06:17 AM
I'd like to get a copy for Palm as well.

click the link in the first post.


does any one have the ecm spy for a 2008 xb12 r buell?

see above reply


Can anyone send me a copy of ECMSPY my computer took a bath in the varsol tank any help would be appreciated Teutscha@aol.com thx

see above

Scout
04-15-2012, 05:23 PM
New to this forum and just want to thank Buellysses for hosting! Working on getting into more DIY with my buell, especially since this one is used as opposed to my first being new - i'm not sure what i'm in for with this one, but it's not been too bad thus far.

rbj69
04-26-2012, 01:26 PM
I just got my cable in the mail today Im super excited!
Although I'm having issues getting the driver to install/work. I keep getting a message saying "The dependency service or group failed to start". If anybody can help me out, a pm would be much appreciated!

Hooker
05-02-2012, 10:17 AM
i just ordered my cable from vtwin tuner connection. i have no clue how to use it, but i figured id figure it out. after all, i am a very fast learner! everyone said that the Buell Blast trans oil change was a bitch to do, but i did mine in under 45min. i timed it! (might get into a small business of doing maintenence on them. a LOT of people in illinois have blasts but the dealers either dont want to touch them, or they charge an arm and a leg).

ok, enough off topic. How user friendly is this program? im very computer savy, but i have never tuned anything before. i have a 2003 XB9S with D&D pipes and a K&N filter. nothing more. are there any pre set types of maps that would work well with this? i have access to a dyno for about 50$ an hour about 15min from my house. what should i do?

wolfo68
05-02-2012, 10:37 AM
the race map wouldn't be bad and the program is very user friendly.

Hooker
05-02-2012, 10:58 AM
i actually don't have any backfiring on engine breaking like many claim you get with the D&D, but i actually think the bike is running rich. it REEKS when i run it in my garage and there seems to be some black smoke (unburnt gas) coming from the exhaust on hard revs.

Hooker
05-02-2012, 11:59 AM
also, am i looking at dropping my MPGs through the floor? i dont ride the bike that hard, i just want the tune for engine longevity

core attitude
05-03-2012, 06:09 PM
I asked this in it's own thread but have not received any response so I thought I would try here. I have searched but I can not isolate "Mac" returns when I search, and it's frustrating because I know that I have come across this info in a thread before. My question is...Is it possible to run ECMSpy on a Mac if I install the Mac version of Mono?
TIA

core attitude
05-05-2012, 10:31 AM
Found my answer [up]

rider1086
05-05-2012, 08:16 PM
Okay, so I have been trying to figure out the correct combo to download for ecmspy and the right driver files. I lost everything I already had on a previous computer and now have windows 7. I have downloaded the copy of ecmspy from the first posting but don't know if there is a new version and what driver files to download. The bike is a 05 xb12r with the race ecm. If someone could point me in the simplest way to get what I need it would be much appreciated.

p.s. I already have the cable

core attitude
05-06-2012, 12:37 PM
I see that many here say you need to click on the "keys" in order to connect. On my version, I do not see where the keys are in order to connect. I was able to connect 1 time but my laptop froze while it was downloading my ecm info, since then, I have been unable to connect.

I am running version 1.1.7.3 it looks like. Any idea if the keys appear on this version?
TIA

lShAD0w
05-16-2012, 05:13 PM
Hello, Ok need some schooling I have a Mac is there a Ecmspy for Mac? Second just bought a 06 Xb9r last owner said he rejetted it lol whatever that means I think he just remaped it, And I would like to reset everything to be save only mods are jardine exhaust and side air breather with K&N. Im a noob but thanks

Stevenc150
05-16-2012, 07:45 PM
Not that I'm aware of...

hobby10k
05-18-2012, 01:52 AM
ok..have EMC spy version 1.12.26, its installed, driver installed, it hooks up and detects the ECM and everything is good to go. However I want to back up my original EEPROM and cant figure it out. I don't have an EEPROM tab like the guide shows. I can find EEPROM if I select "file" menu, however I can not select any of the options (load map, save map,load EEPROM, Save EEPROM,) except I can select the exit option.

maybe it isn't connecting or detecting correctly?

Stevenc150
05-18-2012, 10:34 AM
Need to put it in Professional mode...

http://www.buellxb.com/buell_images/2339_20090813194806_L.jpg

SETH_TERRILLION
05-31-2012, 04:21 AM
i dont know if my question will be answered since im posting on an old thread but i downloaded ecmspy using wine or my mac and ecmspy wont run it says that there is a problem or defiency in the program and cannot be opened has anyone downloaded ecmspy using wine and it worked if so shoot me a private message thanks

ragingbuell
07-26-2012, 02:36 PM
Hello to all, New to the forum and a first time buell owner. Ive had the bike (XB12Ss)for a couple weeks, already put 1200 miles on. Im running a full Micron with a K&N and re-maped stock ecm. Would anyone be willing to send me a copy of ecm spy? I plan on installing the race ecm soon. Anyone have suggested performance mods?

konarider94
07-27-2012, 02:57 AM
Would anyone be willing to send me a copy of ecm spy?

so you found this thread but didnt bother to read the first post?

btw those microns arent very good. but since im really nice id be willing to trade you my hawk pipe for it.

Buellysses
07-30-2012, 07:39 PM
Kona, may want to cut him a bit of slack. ;) I had broken my server again, link may not have been working.

I actually thought I had lost the whole thing entirely! That would have sucked! =)

Stevenc150
07-31-2012, 01:56 PM
Would anyone be willing to send me a copy of ecm spy?Also there's Buellmods.com - Downloads section

S41NTmichael
08-03-2012, 10:22 PM
Kona, may want to cut him a bit of slack. I had broken my server again, link may not have been working.

I actually thought I had lost the whole thing entirely! That would have sucked! =)

As of today(8/3/12), the line seems to be broken still. Any idea when it will be back up or anywhere else I can find the download for ecmspy?

buellxb9rs
08-03-2012, 10:57 PM
what Stevenc150 said ^^ buellmods.com

S41NTmichael
08-05-2012, 09:14 PM
what Stevenc150 said ^^ buellmods.com
Sorry didnt notice that. Worked like a charm. Thanks. Now if I can get the map just right to keep her running perfect ill be alright.

Buellysses
08-06-2012, 04:51 PM
Ugh, I was outsmarted again. I think I got it fixed (for now)

sam 07
08-08-2012, 02:09 PM
Is the download on the first page the same as whats on Buellmods?
Do i need to install the driver for the cable if i have windows 7?
My old computer (windows xp) crapped out so in starting over again on a dell netbook running windows 7.

Thanks for the help guys! My bike is in need of a TPS reset. 06 XB12s

sam 07
08-09-2012, 12:18 AM
Looks like i figured it out. I ran the EXE for the driver. Ran ecmspy and the comport failed.

Windows 7 assigned the cable to com port 52....changed to com port 2 and im in the money!

RemainIncognito
08-24-2012, 09:09 PM
I've downloaded ecmspy from first link in this post BUT it is in a foreign language. Anyway to change it to english without downloading again?

RemainIncognito
08-25-2012, 02:35 AM
Never mind...Over looked it in the thread.

Justaerin
09-12-2012, 06:54 PM
I'm glad someone was able to recently get the file, but it looks like that web server is currently unreachable. Anyone have another link?

Thanks!

buellxb9rs
09-12-2012, 07:16 PM
buellmods.com

neilrl79
09-12-2012, 09:31 PM
Here is a link... it is ECMspy_1.12.27

http://db.tt/Se5DunHW

Justaerin
09-12-2012, 11:31 PM
Buellxb9rs, thanks for responding. I did check there but didn't know if one of them was the actual ECMSpy application. I would have DL'd the .zip but it would have been filtered here at work.

Neilrl79, thanks! Very much appreciated!

ReconLdr
09-13-2012, 01:07 AM
Is it necessary to purchase the cable??? I'm thinking of taking a USB cable crimping on some terminal ends. Has anyone else done this????

neilrl79
09-13-2012, 01:16 AM
Some site has a how to build a cable but I can't remember off hand what site. I believe there is more to it than just a cable with some terminal ends on it tho I can't be positive.

buellxb9rs
09-13-2012, 01:57 AM
the cable has to have a serial to usb conversion which a standard cable doesn't have

DrogeN Omen
09-14-2012, 03:14 AM
i tried building a cable but couldnt get it working.

thrstrmech
09-17-2012, 05:24 AM
get the cable from here

ECMspy cable (http://xoptiinside.com/buell_cabletuning_store)

JimiUly
09-25-2012, 06:19 PM
Awesome! Download worked. Now whats the best source for the cable? Gonna use this to reset TPS, also figure out why I get a stumble off idle when the bike is cold. Breather mod done, better plugs installed, K&N air filter. Any and all pointers apreciated!

08xbstt
09-26-2012, 01:55 PM
So does ECM spy work with late 08 and up now?

Sidwyz
09-27-2012, 12:01 PM
Hey - tried the download . It's not working can you repost ? Iam on a 06 firebolt xb12r,are there any other tools that I can download???

buellxb9rs
09-27-2012, 03:17 PM
Did you try buellmods.com?

MnBueller
01-27-2014, 09:06 AM
Hey folks.
Looks like this thread has died. Are there still free downloads available out there? Or will I have to cough up $72 to get it from ECM Spy?[confused]

neilrl79
01-27-2014, 10:17 AM
https://www.dropbox.com/s/oy2o25ftx90v7xh/ECM_Spy_1.12.27.exe

Here is a dropbox link to the version I've been using.

xb12rs
02-22-2014, 07:05 PM
trying to get ecm spy to comminicate with my bike. no luck

buellxb9rs
02-22-2014, 08:00 PM
Bike set to run? Fetch the comm port? What operating system? Did the cable driver install?

xb12rs
02-23-2014, 04:55 PM
Not sure who the supplier of the cable is as I bought it used so I'm not sure which driver to install. Bike on run switch on. Tried two computers. One with Vista and one with Windows 7. Won't connect to com port. Tried to all the computer to find the driver in auto like someone on here did with no luck. Drained bikes battery so have to wait until I get the charger for my dry cell battery.

OverRev
03-10-2014, 03:52 AM
I tried searching and reading a lot of posts these days, I have a 2008 XB12S, with K&N, breather re-routed and wanting to install a Jardine or Torque Hammer. but first i wanna find a solution for ECM upgrade without buying the EBR Race ECM since the stock ECM is tunable and i hope i can save myself some money.

can someone give me some pointers on these:

1. Is the USB to ECM cable the same for all 03-10 buell XB? cause i found some cable online but they're all stated for 03-07..

2. I know the ECMspy 2.0 is out and it's compatible to 2008 XB12, does anyone use it and have a working copy? or i have to buy it from ECMspy? or know how much it is for a copt from ECMspy?

3. Does anyone have a EBR race map for 2008 XB12s?

Tork
03-10-2014, 07:08 PM
A lot of problems I've seen with new ECMSPY setups using new software and/or cables have one or both of these problems:
- Missing or wrong drivers for the cable interface
- Lack of pin connectivity in deutsch connector (especially on cables bought on eBay)

The drivers are available for download here: http://www.ftdichip.com/Drivers/VCP.htm

For the deutsch connector pin issue, sometimes the pins aren't fully pushed in and seated in the connector during assembly by the cable builder. Use a pick tool, paper clip or other similar sized object and gently push the pins into the connector from the back side (where the wire feeds into the connector). If the pin is not fully seated, you should feel some movement and a click when the pin seats.

OverRev
03-11-2014, 11:48 PM
i tried to PM, email and wed site msg left for Xoptiinside, but no answer so i just buy one from ebay, it's shipped the same day afternoon and the seller confirmed that it works on all XBs.

for the ECMspy it's free for 07- but $78 for my 08, plus no one has the race map for 08-09, i think i may just better off buy a EBR race for $305 and save myself time and trouble.