PDA

View Full Version : Opinions for XB12R Exhaust?



04Bolt
09-03-2009, 01:19 AM
Hey everyone.. Bought my firebolt about a month ago..Ive been lookin at the Jardine GP1 exhaust.. Anyone have any input good or bad about this exhaust? Anyone have any suggestions for a better pipe performance/sound wise? Thanks much all

dave_xb12r
09-03-2009, 02:06 AM
No Jardine. There are better options.

Drummer... or if you're on the cheap, Voodoo, that's what I run.

50dro
09-03-2009, 02:19 AM
Read the shootout for a detailed comparison...

American Sportbike (http://www.americansportbike.com/)

I've also been talking with Randy at Hawk Performance. He's a real nice guy who's willing to work to your specifications. I think I'm going to have him make a pipe for me...Only $175!! [up]

04Bolt
09-03-2009, 02:22 AM
Did you have to buy ECM and do any tuning?
Thanks!

50dro
09-03-2009, 02:29 AM
Not sure if you were asking me or Dave, but it appears that most pipe builders (Drummer, Special O.P.S., Voodoo, etc) say that it's not "necessary" although it is always preferred to tune (with ECMSpy). Randy (Hawk) suggests a re-tune and actually posts Buell race maps on his web site for free!! I hope that helps???

dave_xb12r
09-03-2009, 04:11 AM
like what 50dro said, the pipe builders say its not necessary, but that is only if you dont have a intake mod. If you do have an intake mod, you can get a pipe, then load the race ECM. Keep in mind, the race ECM is tuned for the race pipe so it's not exact, but it will work

Stangxb12r
09-08-2009, 11:02 PM
what is the website that these maps are on?? I am looking to remap but not sure when I can

thanks

Stevenc150
09-09-2009, 03:21 AM
Here ya go: Hawk Performance Exhaust (http://home.windstream.net/hawk63/)

buellet proof
09-09-2009, 05:01 AM
I have a GP1 and I think it's alright other than it is not loud enough for me. It looks pretty cool on the bike too.

LeFox
09-09-2009, 11:32 AM
here's a complete jardine review...

jardine review (http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/Jardine-Exhaust-reviews)

twisted
09-09-2009, 12:50 PM
04bolt its all about what your looking for.... sound, performance, looks, and or price.

buellman09
09-24-2009, 07:55 PM
I just got done putting a special ops on mine, and I am verry happy with it:D

JJxb12r
09-25-2009, 04:12 PM
I just got a pipe done by Randy at hawk performance and it is amazing. It pulls hard at all rpm ranges and sounds awesome. Great pipe and a very nice guy

keithd
09-26-2009, 12:26 AM
Does the Hawk muffler use the exhaust valve, or does it eliminate it? The pics on his site looked like it was still installed.

50dro
09-26-2009, 12:32 AM
He doesn't remove it but it is no longer used.

hula Buell
09-26-2009, 07:07 AM
Listen boys....Go with Hawk and you not only have soul and backbone you will make a friend for life.Randy is THE MAN...:D

pritchpj
10-12-2009, 12:13 PM
does anyone know anything about this race pipe.
i think it was the same one that hals hd xb used.http://www.buellxb.com/buell_images/5000_20091012050722_L.jpg

i dont have the bike anymore but i still have an extra exhaust canister in even better shape than this one.
it is even polished nicely.

pritchpj
10-12-2009, 01:11 PM
here is a pic of the pipe off the bike.


http://www.buellxb.com/buell_images/5000_20091012060641_L.jpg


the bike on the track.
they will hear you coming!!

http://www.buellxb.com/buell_images/5000_20091012052704_L.jpg

stopie20
10-12-2009, 03:43 PM
Ummm all I have to say it SICK!..., and What about the header to match ???

pritchpj
10-12-2009, 04:52 PM
i was told that it is a joint project with buell and beson or bison not really sure, and these pipes were only to be availible to racing teams ...
the race bike i bought had the whole pipe & the dude threw in this extra canister & a bunch of extras filing my truck & trailer.
almost 2 complete bikes. but it did cost me $10,000
and the bike was not exactly what i was told it was.
i have since sold the bike & most of the parts & bought a 1125r with the money.
there are a lot of misc little parts & hardware if anyone needs just ask. sorry to go on & on.

stopie20
10-12-2009, 05:06 PM
I would be intrested in the pipe if you have any specifics on the header?

pritchpj
10-12-2009, 05:15 PM
this is the Hal's hd bike pic i found.

http://www.buellxb.com/buell_images/5000_20091012095727_L.jpg

i called them to get some info but the guy i talked to didn't give up to much info or really did not know.

you could probably get one made after seeing this pic
they are just pieced together with heavy springs.

kinda like a ti force & i had one at the same time & that header was real close.
that may be a good start then fab the rest.
that is still gonna cost some $$$.
i think i read this system back in 03-04 was $1300
it is for sale if anyone want to figure it all out.
im not sure about price,i do know they are rare.
thanks for listening & looking.
any info will be great.

pritchpj
10-14-2009, 09:25 AM
this race canister & clamp in very nice shape $400
Hal's HD used the same pipe on their XB racebike
& should be able to get you one.
not sure on price but would guess not cheap because it probably would be made for you.
i can ship anywhere
email me pritchpj@yahoo.com
thanks ken

brightbuell
10-16-2009, 12:08 AM
That is a great price for an arter market conversion. It looks and sounds great! So whats the catch? Is Randy that cool that hes not trying to rob buell owners like most other conversion pipes? I am picking up my new firebolt next week and I am def calling Randy. :)

lightningbolt
10-16-2009, 12:45 AM
He is just that cool! and yes the rest are ripping you off to convert an old pipe

50dro
10-16-2009, 01:40 AM
YES...He's definitely that cool!![up][up][up]

As a matter of fact, he called me (and other customers I assume)today to discuss Buell's announcement to make sure that I had heard about it. That gives you an idea of how much he cares about his customers AND his products and Buells in general.

Give him a call. It will all make sense once you chat with him for a bit.[cool]

Tank
12-02-2009, 01:37 PM
I had a Drummer on my xb12...actually an econo drummer and got Kevin to do dual outlets...w/o a doubt the best sound I have ever heard out of a motorcycle! And it is pretty cheap, like 250-300+shipping there and back. Trying to sell my 1125R and buy another 12...you never know what ya got till its gone...
Tank

brightbuell
12-03-2009, 01:16 AM
Here is my exhaust.
I am not sure what it is.
My bike had it on when I bought it and there was no paperwork.
It sounds Medieval.

I will get a better pic.







http://www.youtube.com/watch?v=Vyu7ZnlSEgs


http://www.buellxb.com/buell_images/5051_20091113113902_L.jpg

rndrkeagle
12-03-2009, 04:45 AM
that Looks like a Drummer I think Bright.... oh.. and I like the goofy smile you gave the camera as you put on your helmet in the vid... you were going for goofy there... right? :)

Drummer Exhaust (http://www.kdfab.com/drummer%20photographs.htm)

brightbuell
12-03-2009, 08:59 PM
Yes, I was going for full on goofy. Now that im broke into the beast. I can go with a little sexy / bad ass. I will update my vid. Soon ;)[mad]

brightbuell
12-05-2009, 01:18 AM
That 1125r exhaust looks like it would blow heat up your pant leg.

3buellman
12-11-2009, 04:14 PM
I have the jardine pipe, race kit with ECM and it has made a night and day difference in the low end. I got a copy of the dyno and it was worth every penny.

r1aven
01-13-2010, 11:09 PM
hey 3buellman whats included inside the race kit?? i ordered a jardine gp-1 and pro-tuner 3... is that like the same thing?(sorry im nub)

Stevenc150
01-14-2010, 01:39 AM
The original Buell Race Kit was the Buell Race Muffler, high performance Buell intake filter (like K&N), and Buell Race ECM.

WillRotten
05-08-2016, 10:12 PM
I was told this has a racing exhaust and has been remapped. On an '04 Firebolt 12R. Anyone know what kind of exhaust it is?41314132

WillRotten
05-11-2016, 08:00 PM
I've searched and searched. I'm guessing it's a Hawk, since it looks stock. I wanted to get a ECMspy cable to see if it's been remapped, but I haven't found software that will work with my Mac computer.

ReadyXB
05-11-2016, 09:05 PM
I wanted to get a ECMspy cable to see if it's been remapped, but I haven't found software that will work with my Mac computer.
ECMSpy for Mono supports Mac.

WillRotten
05-12-2016, 07:06 PM
Thank you Ready, I tried to download it yesterday but was doing something wrong. I figured out I need to register first. I'll try try again.