View Full Version : Exhaust Servo
bronjeremy
10-05-2009, 12:00 AM
Is there any way to remove that exhaust servo on the air box... becuase as soonn as i un plug it and start the motor the over heat light turns on and i wanna run a air box delete and eveyone that i see done has no exhaust servo... plus i have a jardine pipe so i have no use for it???????????????/
50dro
10-05-2009, 12:17 AM
If you're using ECMspy, there is an option to disable it. You can remove it after you make the change in the ECM.
RichP99
10-05-2009, 12:26 AM
If you are handy you can make up your own exhaust valve emulator
Link (http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/ASB---Airbox-Delete-and-Breather-Reroute)
Or you can buy one from ABS for $45
ABS link (http://www.americansportbike.com/shoponline/ccp0-prodshow/9313.html)
:D
edipis
10-05-2009, 01:04 AM
for $46 shipped, i will get you an ecm spy cable. i will send the program, drivers, and what race maps i have also.
you can disable the servo, plus do a ton of other stuff.
chadlikness@gmail.com
bronjeremy
10-05-2009, 01:35 AM
Does anyone know anyone ARound Appleton, WI that would have ECM spy locally
Buellysses
10-05-2009, 03:31 AM
Off subject... I used to live in Appleton. SWEET!
Awesome town to drink in (at least it used to be)
Stevenc150
10-05-2009, 04:25 AM
Using ECMSpy, disable the "Exhaust servo" option and rip it all out is a good option - or zip-tie it out of the way. The exhaust emulators have a rep. for failing pre-maturely.
Here's the download for ECMSpy: ECMSpy Download (http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/ECM-Spy-Download)
bronjeremy
10-05-2009, 05:34 PM
Thanks Stevenc i just need the cable and some pre made maps :]:]:]
Stevenc150
10-06-2009, 04:39 AM
ECMSpy.com or Ebay for cable.
Post up for pre-made maps.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.