PDA

View Full Version : Drummer with a jardine insert



jwille1
12-02-2009, 08:54 PM
Just installed a jardine insert. It mellowed it just a little. I like it better, but can be the judge. http://www.youtube.com/watch?v=U2O0rFivQXU

onelogue
12-02-2009, 09:02 PM
Hmm im a fan of noise but sounded good to me :)

taylor
12-02-2009, 09:44 PM
i was thinking about doing the same thing. i have like four of those inserts.

taylor
12-02-2009, 09:48 PM
did you have to make a new gasget for the differnce in size? or did you just drill a hole and screw it in with extra space on the sides?

jwille1
12-04-2009, 02:36 PM
I talked to american sportbike. I think it was Al. He said to use a washer to center it in the outlet and a longer set screw with locktite. I took it a step further and tapped another hole on the opposite side. You would need a M6 X 1.00 tap. The bolts needed to be about a 1/8 inch longer. Found them at Ace Hardware for .40 each. I also heard people have lost these, so I used stainless lock waser on the outside. Hope this helps. When I said it mellowed the sound a little, it's more noticable in my carbon helmet than to others.

rndrkeagle
12-04-2009, 04:32 PM
idk... sounds a bit tinny to me.... takes away the deep "Woody" sound of the Drummer and makes it sound too much like a Jardine.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/-gwXJsWHupg&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/-gwXJsWHupg&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

jwille1
12-06-2009, 04:43 PM
That's funny