PDA

View Full Version : Need new bars



Adamsblast
12-15-2009, 06:39 PM
Hello Blasters,
I 'd like to replace the stock bars with something a little wider with less bend. What's available and what will work with stock controls and cables?

Thanks!
New Guy

ezblast
12-21-2009, 07:34 PM
Superbike bars - should have come stock with the bike - they are that much of an improvement.
EZ

badidea
12-21-2009, 08:09 PM
pro taper suzuki minis. all original cables will work. 4" less bend so they end up being wider without needing extra cables. I put one inch risers on as well and it was snug but fit well. Good Luck.

Adamsblast
12-25-2009, 06:10 PM
Thanks Guys!