View Full Version : After Market Front Master Cylinders??

01-21-2010, 02:43 AM
Does anyone know of any after market front master cylinders for an 08 1125R?

I need a new one, and was seeing what other options are out there other than stock. I am putting my bike back together, I have everything to get it back on the road this weekend, but then found out the Master Cyl I ordered from Harley was back ordered. Bummed

If anyone knows of any that would work please let me know


01-21-2010, 01:40 PM
brembo & braking both deliver master cylinders for the 1125r & cr

01-21-2010, 05:32 PM
Thanks LeFox-
I have found some Brembo and Nissin onces that will fit. But damn they are expensive. The stock on isnt that bad (price wise) I am just impatient and don't want to wait 2 more weeks for it to come off back order.
Thanks for your help

01-22-2010, 03:19 AM
I thought I saw on another board that people were using a R1 master cylinder? Not sure what year. I will do some research and post.

01-22-2010, 03:32 AM
I have a used 3/4" Nissin MC on my bike from a 2005 ZX636. The only reason I can think of that might prevent you doing the same would be clearance issues with the faring at full turn. I know this was a issue with Bolt owners who have tried this mod.

Well here is the link to my writeup


01-22-2010, 09:38 PM
Thank you very much for the suggestion. I think this is the route I am going to be going.

01-23-2010, 12:40 AM
No problem [up]

More performance for less money has its way of persuading people ;).