Swaping back to stock can

[JSW07]

Where mught I find the cable to operate the valve on my stock exhaust that was removed by the dealer and where do I route it?

[BuellPartsGuy]

Usually if they took the servo out, they usually take out the cable also. It runs down through the frame just to the left of the rear head at the back of the airbox. If they didnt break the clips, you should see 3 of them I believe going straight down from there to the center of the muffler.

[JSW07]

When he gave me the parts back there wasn't a servo in the box...can I re-install the servo and will routing the cable "through the frame" require fancy hand work?

[BuellPartsGuy]

No its pretty easy. Just basically find room where it wont get melted and it doesnt bind the cable.