ericry
02-19-2010, 10:57 AM
Here's some before and after pics of the gearbox output shaft oiler/nipple installation.
Before
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell_tens_and_outputshaft2.jpg
More before
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell_tens_and_outputshaft.jpg
Even more before
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft.jpg
Here's what it looks like with the little black cover off
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_open.jpg
and from another angle
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_open2.jpg
Here's the nipple/disc installed...you can see a mark on it from where I tapped it in with a 3/4" socket....dont know how to avoid marking it !
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_finished.jpg
some more
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_finished2.jpg
and here what the original cover you've pulled off looks like
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_oldcover.jpg
And here it is from the inside....notice the kind of metal plate at the back of it...this is why you're told to cut it in the centre and leverage a screwdriver or something in there as the plate stops you doing this anywhere but through the centre...
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_oldcover2.jpg
I still need to now drill the hole in the plastic sprocket cover....will be doing this shortly and will post a pic.
Hope this helps someone.
Eric.
Before
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell_tens_and_outputshaft2.jpg
More before
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell_tens_and_outputshaft.jpg
Even more before
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft.jpg
Here's what it looks like with the little black cover off
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_open.jpg
and from another angle
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_open2.jpg
Here's the nipple/disc installed...you can see a mark on it from where I tapped it in with a 3/4" socket....dont know how to avoid marking it !
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_finished.jpg
some more
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_finished2.jpg
and here what the original cover you've pulled off looks like
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_oldcover.jpg
And here it is from the inside....notice the kind of metal plate at the back of it...this is why you're told to cut it in the centre and leverage a screwdriver or something in there as the plate stops you doing this anywhere but through the centre...
http://i181.photobucket.com/albums/x190/cx500ec/Buell/buell__outputshaft_oldcover2.jpg
I still need to now drill the hole in the plastic sprocket cover....will be doing this shortly and will post a pic.
Hope this helps someone.
Eric.