Removing stock exhaust 4 termignoni???

[Tonja]

Hey Guys!
Im the prowd owner of a 09 Ss:D Have had her for a couple of weeks. The bike came with a termi pipe and im looking for some hints before I start ripping this stock pipe off[confused]Ive read its a prick of a job?
Sorry:( Im sure this topics been done to death, but im a noob with this bike and wanted some hints before a jump into the deep end.

Thanks in advance!

Also, are there many Australian riders on here???

[Trill]

Start by downloading the manual if you don't own one already

Service Manual Download (http://www.gigaboogie.com/buell/manuals/Buell-Firebolt-Service-Manual.pdf)

Then get the bike level, using stands or wheel chock

use a jack or something to support the weight of the muffler while you remove all the straps to keep the weight from stressing the header.

You are supposed to remove the idler pulley to get to the bolts of the 2 rear straps but you can manage with an extension and maybe a universal joint.

Once all straps are removed and the torca clamp on the header is loose just remove item holding the weight and wiggle it off the header.

If you have to remove the front muffler mount from the engine make sure not to loose the 2 bushing that are in the recesses in the engine... I know from experience :)

Then go about installing the new unit.

hope this helps