PDA

View Full Version : Jardine and chin fairing



BKKBuell
03-22-2010, 06:10 AM
I need some ideas how I can mount a chin fairing having a Jardine slip-on... The brackets from the org muffler are not there... Thx for any ideas with pics

onelogue
03-22-2010, 08:00 AM
My brothers Jardine came with brackets to mount the chin fairing, im guessing yours did not?

You may have to order the brackets separate from Jardine.

Buell_Magic
03-22-2010, 12:07 PM
Mine came with a bracket as well.

Kevin

jb35
03-22-2010, 12:26 PM
mine did not come with any brackets to mount the chin fairing back if you are talking abolut the 2 screw holes behind the front tire. I called Jardine and he told me there was not a bracket for that and the screw just went back in the hole? It seems fine though I check it every once in a while and is still on there very tight.

browland
03-22-2010, 05:30 PM
should come with brackets like this:

http://i100.photobucket.com/albums/m14/rowlabm/bike/2010-01-06213621.jpg

BKKBuell
03-23-2010, 03:30 PM
browland... thx for photo, I will make one like this.[up]

browland
03-23-2010, 03:34 PM
let me know if you need some more pix or measurements I can take some of both sides if you need it... You can email me at rowland@auburnalum.org

BKKBuell
05-31-2010, 04:59 AM
Browland is land under at the moment... Does anyone has photos of both brackets. I just need to now the principle of the fixations, the rest I can do myself. thx a lot

AV8guy
05-31-2010, 05:57 AM
email sent browland

BKKBuell
06-01-2010, 04:51 AM
Sorry I have not received any ... thx

alexmontiel
10-13-2010, 05:44 PM
I have the same problem and I been loocking to order them i sent and e-mail to jardine but no answer yet
i red that jardine re-desing and includes the front braket for the 2 screws infront
if somebody can help me out
it will be great