PDA

View Full Version : Nut for the header pipe.



AdventureUly
03-23-2010, 07:55 PM
I have lost one of the nuts off my header pipe.

Any one know what spec the nut is? Size, thread etc????

I have tried a couple I had sitting around but none fitted.

Thanks

grumpy
03-23-2010, 10:55 PM
according to the parts book, DA0500.12FZ, is 5/16 24 tpi[smirk]

scraperbike
03-24-2010, 12:21 AM
yep 5/16 fine thread, just had to replace both myself using lock washers

AdventureUly
03-24-2010, 11:07 AM
That's great chaps.

Thanks for the info.[up]

Buellysses
03-24-2010, 01:44 PM
Go check out ACE hardware, I was able to find some steel lock nuts. Not the kind with the nylon insert, the 1-piece steel.

McMaster to the Rescue (http://www.mcmaster.com/#hex-locknuts/=6cumvr)

MCM FTW!

AdventureUly
03-24-2010, 03:29 PM
That's a great site Buellysses!

Do you know of a UK based company like this? I am not sure they will want an order for just two nuts all the way to the UK.....

dustin_usmc1
03-24-2010, 03:42 PM
It really sucks when you lose one of your nuts.

Buellysses
03-24-2010, 04:57 PM
I was holding back saying that dustin...

Boy Adventure, I'm striking out... I know McM does ship international, but you probably won't be able to buy just 1 or 2. You'd have to buy a pkg of 100 ($10) plus whatever the shipping costs are.

I'd just take a spin to the local hardware store and see what they have.

AdventureUly
03-24-2010, 06:44 PM
That's what I thought.

All this just to get one of your nuts back!

:D

AdventureUly
03-30-2010, 07:22 PM
I found all the nuts and bits that i needed fron the Hog Father!

It's a custom bike shop in Southport who deal with HD's and build their own bikes. A good little find.

The bikes all well now.