PDA

View Full Version : Need Info On Stock Exhaust Mod



jreinke
03-26-2010, 05:26 AM
I like the look of the stock pipe. Anyone have pics or knowledge on what to do take make the pipe louder without losing hp. Worst case senerio i lose a little hp but gain some sound. From what i read you cut into the top of the third chamber and remove two pipes and weld some new tips on. Anyone done this or have pics? Anyone know the size of the exhaust tips? Thanks

Macbuell
03-26-2010, 05:54 AM
Some people take a metal spike, inset it in the exhaust tip, and hit it with a hammer until breaking through the pipe and into the chamber next to it... pretty easy if you ask me. Just dont hit too hard and start with a small hole. Can always make hole larger, but cant easily make it smaller.


EDIT- OHHHH SORRY, didnt check which forum, I was talking for XB, Sorry

xtremelow
03-26-2010, 08:19 AM
Basically you just cut the stock can apart remove some of the piping and make it more free flowing and weld it back together[smirk]