PM Sent
FUEL PUMP KITS FINALLY COMPLETED AND READY TO SHIP
Complete XB fuel pump rebuild kits now ready to go. I assembled these from OEM parts left in stock along with US and Jap spec parts where required. In essence what you'll be doing is disassembling the entire pump assembly, cleaning up the housing base and internals, throwing most everything else into the trash, and assembling with all new parts. The result will be a complete as-new fuel pump. NOTE: this kit will fit the 2003 early style “long tube” pumps but you'll need to re-use the 2 rubber internal lines....just clean and re-clamp them to the pump assembly. Each full kit includes the following new parts:
pump motor
pump suction sock filter
outlet high pressure filter PART # P0101.02A8
outlet high pressure filter bushing kit(2 pieces) PART # P0164.K
high pressure regulator supply fuel line
two(2) fuel line clamps in either Oetiker or worm drive style-your choice
fuel pressure regulator-factory pre-set to 52psi
regulator-to-housing sealing O-ring
regulator pintel O-ring
housing-to-frame O-ring(quantity 2) PART # P0121.02A8A
fuel level sensor assembly-PART # P0789.KA
submersible wire-tie for wiring harness
NOTE: the filter bushings and the housing-to-frame O-rings MUST be assembled with either O-ring silicone lube(preferred) or Lubri-plate lube. you must supply your own.
As of 4-4-2019 the factory supply pipeline and all dealers are out-of-stock on all new pumps and virtually all of the pump rebuild parts. Part numbers are NLA and no plans to ever be re-listed.
Total kit price will be $189 and $6 USA freight.
Canadian freight price via USPS first class approx. $25
World-wide freight price via USPS first class air is $29/USPS priority air is $37
To order your kit either PM or email me.
John
scootertrash196@yahoo.com
Got my new oem pump assembly today! Thanks John.
I hope it's like my snow blower. If you have one you won't need it.
sure thing josh. and now you have a new one on the shelf that you might never need. LOL
speaking of which, the new complete XB pump rebuild kits are ready if needed. working on early style 2003 kits but not ready yet. these will completely rebuild the 2004-2010 pumps. PM or email if you need one.
Attachment 11483
Attachment 11484
Attachment 11485
Attachment 11486
Received my rebuild kit on Tuesday ( less than a week to here in Australia).
I can now start work on the restoration of a really toasted 12X pump assembly that I have had in the 'too hard' tray for quite a while.
Thank you for going to the trouble of putting this kit together for the collective - as previously stated, you are a good man John. :up:
PM sent :)
Will say John's fuel pump kit is awesome! It has everything you will need for a complete rebuild. Thanks for putting these kits together John. Glad I have one in stock for just in case. I would say it is money well spent.