Anyone willing to share maps for the XB9 with a D&D yet?
Printable View
Anyone willing to share maps for the XB9 with a D&D yet?
That should be easy to find, but you'll need to give some more info.
What are the rest of your mods? K&N and breather re-route are the most common.
What is your firmware version? What program (file type) are you going to be using for the swap?
Hi I'm new to this thread its my first post, excuse my english, I also would be interested in a map for 2008 XB 12ss BUE2D, D&D exhaust, K&N no breather re-route, ECM droid with buelltooth dongle, so if it is possible
for someone I would appreciate this thanks Gaetan
Yep, just the D&D, K&N, and breather re-route.
Firmware: BUEIB
EcmDroid. So I will need an .xpr file
Since you are both using ECMDroid for the swap, I suggest going to Buelltooth.com for the .xpr files. They offer free maps for anyone on their customer database.
Well.. I got their D&D map for a 9.. They said it was from a customer and they haven't tested it but MY bike runs kinda ****ty with it. Rough cruise, idles fine at first then wants to die after you ride a bit, has balls through the midrange at part throttle but is lacking at WOT and higher RPMs. I know the D&D is a midrange pipe but I switched from the RACE map which seemed to have more through the higher register. Also, I did a proper TPS reset and all that jazz
Ok then.
Whats your AFV? What are the limits set at?
Thanks Cooter, I went and bought the Baro sensor on buelltooth.com to get a tune cause I already had bought the dongle from ecmcables.com at the time they were out of stock at buelltooth.com
My AFV adjusted from 100% down to about 83 or 89%. Don't remember exactly, I looked at it yesterday. I'm pretty sure the limits are set at 60% and 150%.
On a side note, with the race map it would adjust from 100 to about 127%