Cooter makes a handy XB rear stand mount

I'm not the first one to do this, but I had a couple neat ideas that make it V2.0. I've seen 1/2" all thread and stuff used this way but thought is was a little to hokey to trust the whole bike on. If you want to watch Ol' Cooter play with his hard rod, keep reading!

Found some stainless solid rod in the scrap bin. It doesn't need to be solid, or stainless, whatever fits through the axle will be ok.
https://farm5.staticflickr.com/4426/...fc69240d39.jpgIMG_1582 by Cooter!, on Flickr
Drilled (action shot woo!)
https://farm5.staticflickr.com/4345/...d8859d969d.jpgIMG_1584 by Cooter!, on Flickr
Tapped to 1/4-20 (also not specifically important). You just want to be able to remove one (or both) ends.
https://farm5.staticflickr.com/4415/...3ddaffb56e.jpgIMG_1585 by Cooter!, on Flickr
Using an license plate bolt for the big smooth head and a fender washer
https://farm5.staticflickr.com/4391/...1d26299cea.jpgIMG_1587 by Cooter!, on Flickr

And tacked together for toolless install
https://farm5.staticflickr.com/4417/...feb4467c7b.jpgIMG_1593 by Cooter!, on Flickr
Welded a washer on the other side. You could just drill tap here too instead.
\https://farm5.staticflickr.com/4346/...88fcc97c20.jpgIMG_1590 by Cooter!, on Flickr

https://farm5.staticflickr.com/4410/...9d3858f3e9.jpgIMG_1591 by Cooter!, on Flickr

Part of the magic is the 1/2', thick, rubber heater hose:)
https://farm5.staticflickr.com/4379/...27a58825ba.jpgIMG_1592 by Cooter!, on Flickr
Rubber slipped on each end
https://farm5.staticflickr.com/4437/...168232042c.jpgIMG_1594 by Cooter!, on Flickr
Because it stops the stand thing from banging against the swingarm and spaces it equally side to side
https://farm5.staticflickr.com/4388/...d976a4d152.jpgIMG_1596 by Cooter!, on Flickr
And you're thinking. "Hey man, I need a beer." no, wait thats not it... You're thinking "Hey man, it's a little wide."
17.5" actually just wait for it...
https://farm5.staticflickr.com/4363/...afd762b143.jpgIMG_1597 by Cooter!, on Flickr
https://farm5.staticflickr.com/4356/...94d38538e4.jpgIMG_1598 by Cooter!, on Flickr
Works really well and keeps the metal stand away from the swingarm.
BUT....
https://farm5.staticflickr.com/4331/...e76a2416de.jpgIMG_1599 by Cooter!, on Flickr

Taa Daa! It fits the wide jack stand tops too!

Extra bonus awesome points...
You can actually put the stand under the right side and pivot (lifting) the bike up by the passenger foot peg bracket and place the other stand on the left pretty easily without needing an actual bike stand, jack, or ladder:)
https://farm5.staticflickr.com/4435/...b2d9dcd7cd.jpgIMG_1600 by Cooter!, on Flickr

DOUBLE extra super awesome bonus points!
If you are lucky and smart enough to own an EBR 1190 with its ridiculously wide rear spools (16" wide BTW)... Your stand now fits BOTH the XB's and the 1190 without even adjusting it!
https://farm5.staticflickr.com/4421/...4cf780928b.jpgIMG_1601 by Cooter!, on Flickr

Now you can go get that beer. Because you're thirsty, smart, and gosh darn it you're pretty good looking too:)

man, it just doesn't seem right when I read IMG_xxx by Cooter! on Flickr.......

nice job......

man, it just doesn't seem right when I read IMG_xxx by Cooter! on Flickr.......

nice job......

won't let me give you rep points. Said you were a slutty rep, or rep slut or something like that.....

:applause:

Whoops! I should edit? (nah!)

Whats a rep point????

Quote:

---

Whats a rep point????

---

it's the throttle setting on the grip of the hand you have fun with......

Hey cooter I seen the twisted license plate bracket on the sx. What do you think about it? Is it bright enough for all the drunks to see? That was my concern with it, the small light strip all low under the tail.

Hey Pain, That thing is even bright in the day time, It is beyond Bright!!!!

Attachment 8324