Printable View
OK guys so haven bit of trouble I'm trying to do a shift pawl adjustment ,but don't know what gear my transmission is in ,the hole in the detent plate is pointed to the clutch shaft and I can only make it move up one shift ,but never can get it to the point to do the shift pawl adjustment . also its really hard to shift so I really need to know what I can do to get to the point I need it ,and yes iv read the manual but didn't see anything about how to tell what gear the bike is in
Rolling the back tire while pressing on down on the shifter will help it down shift to first, then go up a 1/2 and that's neutral.
Iv tried that it still won't go that far ,and cooter you were right I ment to tell you I made new pins the ones that broke out of 3/16 solid steel dowl ,lows sells it in 4 foot pieces so I cut them 8mm long and rounded the points like a brocken tip pincel and the fit perfect , but the but the shift drum so stiff im worried about breaken them again .