Got the buell tooth. Emailed them about a map for my 2006 xb9sx with hawk exhaust and air box mod. No reply and wanna go ride this weekend! Stock seems lean on top. Got a .xps map plzz share. Thanks
Printable View
Got the buell tooth. Emailed them about a map for my 2006 xb9sx with hawk exhaust and air box mod. No reply and wanna go ride this weekend! Stock seems lean on top. Got a .xps map plzz share. Thanks
Bueib
I have a bunch of ECMSPY maps but I am not sure if they are compatible
Got ecm spy also. Haven't tried using it. Got the dongle and everything. Send me some maps please. Ill work it out. ThanksQuote:
Originally Posted by Lusiphur
hangpilotfc@gmail.com
I can do one better
All of my XB9 Maps are attached in a Zip file.
I can't guarantee anything on these. I downloaded them all a while ago. So make sure you backup your existing Tune first.
Attachment 11745
And just in case anyone wants or needs XB12 ones
here ya go
Attachment 11746
.XPR files for ECMDroid
.TXT .EPR for old ECMSpy
.EPR .BIN for TunerProRT
You can load a .TXT with ECMSpy software not hooked up to the bike then save the EEPROM and get a .EPR AND .TXT file from it. you can check your ECMID on the ECMSpy website and see exactly how large the file type should be to make sure it is correct (bottom of the page linked). http://www.ecmspy.com/supported.shtml
You can get .TXT files here http://buellmods.com
Also do NOT take any other ECMID and upload it to your ECM or it will be bricked (not work), if you do or did do this... flash the correct EEPROM for your ECMID back onto the ECM. What you CAN do is take the fuel/timing tables from one of these other ECMID's and place the table data for these in place of the table data on the ECMID for your ECM. (hope that makes since)
How do you know? How would you know if you changed it? Throwing another map at a total guess sounds like a terrible idea.Quote:
Originally Posted by Frankxb
Not to be a downer, but the potential of causing more issues than solving them is huge, without any testing whatsoever.
You can use the ECMDroid or ECMSpy programs you have to see if the ECM is trying to correct for an issue like that. If you even have one. My 2¢.