'Melvins'

Melvins. Thats what they should call them. And fine! You do you, Bill, but be honest about it. Want "Ten new models in a year"? cool. Still 'Melvins'. I really don't see the need to buy or use the Buell (TM) for any reason. Sure motorcycles have been re-branded many times before for a market base because of nostalgia or reputation. It's a long list of current brands that apply to that.

Buells aren't old enough for nostalgia, and from a reputation standpoint, let's be honest. The gen pops opinion of Buells reputation is 'weird brakes and bankrupt twice', or even 'great engineer' if they know a little, but neither equate to selling a new brand?. Even assembling EBR's from warehouse parts is not "Buell (TM)". They haven't engineered a single piece on it and they're not making XB's.

Melvin stated their "Lead Engineer" Is Jacob Stark. No offense to him, but his qualifications is not an Engineering degree on the wall. They are FaceBook self-promotional guy who "Figured I'd start to work on bikes about 10 year ago", and lost a shop to his GF by not paying the bills. Maybe he's great! Maybe he's not. But he's not any "Engineer" until he finishes engineering school. He might even re-think some of the parts he sells:apathy:

At least when the EBR 1190 came out it was competitive. Although less than a year later it was electronically dated and I do NOT see EBR being able to keep up on that front then, or especially now with Melvin. A $20K hyper sport bike without even ABS?! Are you joking? Groms have ABS! In fact, with the new infrastructure bill it will be ILLEGAL to sell a motorcycle without ABS.

I still am very much in love with my EBR, It's the LAST analog hyper sport bike we will ever see.
My Bubbles says "Damn, they are sucking the cool out of your bike" and I couldn't agree more:upset:

TL;DR
Get off my lawn.

Thats so bad it is uncomfortable to watch.
I originally thought it would be an avenue for continued parts availability for my favorite bike(:love_heart:) but turns out LAP seems to be single handedly financing Bill's dream by hiking EBR parts prices to the MOON:mad-new: Even drawing the used parts market up with it.:mad-new:

Jacobs shop thing was a little personal as I have a friend that got screwed in the process (and I know of others), not to mention that as a shop owner for over 22 years, I NEVER left a bill unpaid. NEVER. It adds a bad rep to an already poorly perceived industry, AND none of his responses had the slightest hint of culpability. Every excuse in the book. "**** happens" would have been better. But instead, "My girlfriend didn't pay the bills!" c'mon man... Like I said, I've met Jacob a few times, and I liked him. But business? Uh, hard pass.

Check out what the new Buell® "Lead Engineer" designed all by himself!:hororr:
https://www.youtube.com/watch?v=UGK6oEgLEKE
BTW, I got 12,000 miles of 80% track use before I changed my front pulley.

Note the promotion attempt by posting YouTube vids under different names. Shady, old hat, and so bad it's not even convincing. They self-make every 3 minute YouTube promotional video (that also read from the same script), show the same horrible 3 renderings and a picture of the first Black Lightning from 2016 over and over.

The latest press had a 6 pictures. 4 of the 'shop' repeated and scanned terribly, with some horrible photochop add-ons (of the SAME renderings) and 2 of people important enough to shake hands with but no names? Partner from the UAE? Cool! WHO is it?

This all SCREAMS of scam, but I just can't see where the money comes from? Are they playing the bigger game of venture capitalists? Hike up the perceived value, go public, sell shares, profit? Sorry but thats played out already, and again.

All that, and I'm confident someone in 2022 paying $20K for a bike designed a decade earlier will actually get that bike. It's not a scam at that level, but theres definitely something going on.

Funny you mentioned abs on even a Honda grom India was the first to require ABS. On bikes about 2017 (either the passage or implementation ) thus bringing the price down over the next few years. There is no reason the new “Buell’s” should not have ABS standard and if the new engineer is worth his salt then a retro fit kit based on that would be offered for any XB based bike helping to get the production numbers up.
Why get paid only once for your work or knowledge?
On all new liter bikes are only three different ABS systems each with their own calibration.
How much can they really cost a manufacturer if a $3995.00 Honda can have it.

PLUS I want a kit for my XT.

I'm just curious to see if the new Buells will come with the "Jacob Stark EVAP Mod". After all he does claim there is a problem there that can cause "front cylinder failure leading to complete engine failure and accidents".

You'd figure since Bill Melvin (probably) also still owns "EBR" he would want to get in front of this to make sure no one gets hurt or killed due to a problem that their "lead mechanical engineer" has identified and designed a solution for (at least for his Buell customers and the EBR owners who bought bikes after he purchased the company).


So, I guess this begs the question of "is this really a problem"?

-Is it caused by abuse or lack or maintenance? Or is it just an isolated issue of a part randomly failing at the wrong time in the wrong way?

-Is it an actual problem that the factory knows about? According to their "lead mechanical engineer" it would appear that a problem has been identified by said "lead mechanical engineer" and a solution is at hand and available to the public (for a price).

-Is this really not a problem? Maybe when he was hired on at Buell and got a peek behind the curtain, he realized this "problem" of a "front cylinder failure leading to complete engine failure and accidents" isn't really a problem after all.


Unfortunately, this whole thing could get construed in the same light of the old Ford Pinto recall.


I'm not trying to bad mouth Buell or Bill Melvin, as I think it is truly wonderful they are trying to get Buell back in the spotlight. He may not even know that video is in existance.

I do find it odd that the guy he hired as his "lead mechanical engineer" is calling out a potentially fatal problem in Buell motorcycles and is broadcasting it out to the world on YouTube. I'd figure he'd delete that video once he got hired at Buell, as having it out there can create all kinds of problems for the company.



https://www.youtube.com/watch?v=FM5RAGqrcqw

You bring up a fantastic point. That's what progress is. Without any real engineering staff, the EBR bikes lost ALL progress almost a decade ago:sorrow:

There is no amount of testing that can address every situation on a machine. Billion dollar spacecrafts fail too. Once EBR manufactured and assembled it's parts in 2014, thats it. No progress, no more revisions, no updates. For instance, the torque specs for the EBR's front rotor bolts were updated in 2016. I don't know why (I'm no engineer), but it's pretty scary the new Buell(tm)'s "lead engineer" doesn't know either.

They're assembling "new" bikes from EVERY single EBR part that is over 8 years old. Any issue, common or not, will never be revised to be a better part. Including safety issues. They aren't just standing still, the bar is always moving. The new Buell (tm) is going backwards:disturbed:

Even worse than that, is your exact point, 34:19:upset: The evap solonoid would be a cheap and simple change to make. But even that simple 'upgrade' is in question. Some self taught mechanic (without any degree) bought a slightly better solonoid and put it on his buddies bike, tested it himself for a second or two, then picked up his FB megaphone to sell it. Maybe it works? Maybe it doesn't? Maybe it's worse. Send it to the EPA, then we'll know.

Nostrum anyone?

How big a safety issue would dictate a Buell (tm) recall? Do they even have the ability to do one? Do you get a warranty with your $20K purchase better than a handshake and a smile from a man I wouldn't buy a used car from*?



* I don't know Bill Melvin. But the opinion I have curated about his company from his own promotional items is worse than if he'd never produced them at all:down:

Quote:

---

Originally Posted by Cooter

You bring up a fantastic point.

---

I always bring up fantastic points.

Quote:

---

Originally Posted by Cooter

Even worse than that, is your exact point, 34:19

---

Well, that didn’t last.


The thing with my point, is that this is a potential safety issue pointed out by the "lead mechanical engineer". Not just a failed instrument cluster, cracked fairing or a rear header pipe redesign :black_eyed:. Jacob is known for being "the man" when it comes to Buell and when he says "front cylinder failure leading to complete engine failure and accidents", I'm sure thats not some half cooked hypothesis and probably should not be taken lightly. Now that he works at Buell as the "lead mechanical engineer" this should be at the top of the list of issues to resolve (especially since he devised a solution). Further more, if he truly believes it to be the cause of "front cylinder failure leading to complete engine failure and accidents" he should have brought it right up to Bill Melvin as Jacob has the solution at hand.

Quote:

---

Originally Posted by Cooter

You bring up a fantastic point. That's what progress is. Without any real engineering staff, the EBR bikes lost ALL progress almost a decade ago:sorrow:

There is no amount of testing that can address every situation on a machine. Billion dollar spacecrafts fail too. Once EBR manufactured and assembled it's parts in 2014, thats it. No progress, no more revisions, no updates. For instance, the torque specs for the EBR's front rotor bolts were updated in 2016. I don't know why (I'm no engineer), but it's pretty scary the new Buell(tm)'s "lead engineer" doesn't know either.

They're assembling "new" bikes from EVERY single EBR part that is over 8 years old. Any issue, common or not, will never be revised to be a better part. Including safety issues. They aren't just standing still, the bar is always moving. The new Buell (tm) is going backwards:disturbed:

Even worse than that, is your exact point, 34:19:upset: The evap solonoid would be a cheap and simple change to make. But even that simple 'upgrade' is in question. Some self taught mechanic (without any degree) bought a slightly better solonoid and put it on his buddies bike, tested it himself for a second or two, then picked up his FB megaphone to sell it. Maybe it works? Maybe it doesn't? Maybe it's worse. Send it to the EPA, then we'll know.

Nostrum anyone?

---

So, counterpoint.

When Buell released the XB, they were basically using an engine that dated back to the 1980's and carried it in the lineup all they way to the end in 2010. A motor based on a 25 year old design!

Granted, the 1125 was released in 2008, and while pretty revolutionary for Buell, Honda had bested it in 2000 with the RC51 and arguably Suzuki did so even earlier with the TL. And Erik kept that engine around until EBR v1 folded with little to no updates aside from a "big bore kit" (1190), drilled charging rotor and a sight glass in place of the dipstick. So, 2015-2008 = 7 year old motor design.

So, is EBR v2/"the new Buell" using a cutting edge motor that is 8+ years old in their new line of motorcycles? Yes, but lets see what they have planned for the future. Maybe there is an ET-V3 motor lying in wait for all those 8 year old parts sitting on the shelves to be sold off to make room for the new stuff.

I agree that the motor is long in the tooth for a "bleeding edge of tech" superbike like the EBR/new Buell and SHOULD have a new motor. But this is a motorcycle company that is owned by a company thats sole purpose is to split up and collect assets from companies gone kaput. Not a company owned by the largest American motorcycle company out there. I'm sure there were plenty of days when Bill Melvin looked in the mirror and asked why he was trying to save the motorcycle company that Erik ran into the ground and basically distanced himself from (an oversimplification). I'm not saying Erik is a bad guy or didnt know what he was doing, although I did question the companys direction from the get-go... but I also knew nothing about any non-compete clauses or other stipulations from the shuttering of the Buell brand. Nor do I know anything about running a motorcycle company, aside from what articles I've read on the internet being an opinionated keyboard warrior.

I give props to Bill for giving it a go and keeping Buell alive, even if it isn't the company we want it to be. How many years has it been now? 4 going on 5?

PS. Hey Bill, if you read this forum crap, I'd love to see a Buell version of the Vitpilen 701, styled like a S1.

The short answer is no:( I bet you a six-er of tasty beverages theres no friggin any type of V3 EBR engine all dusty in the back of that warehouse. Erik didn't have that kind of money or it would have been in the EBR in 2014 and Bill's team sure hasn't shown any engineering prowess. It's so expensive to design an engine from scratch a lot of mfg's cheat with a cam change for a different models or even cross-branding like Bimota/Kawi, Husky/KTM.

And why? EPA approved 185HP isn't enough? The 22hp I got from an exhaust and ECM change tell me theres some horses in the stable of that 1190 V-twin. Hypersport bikes that have been freshly re-designed like the 2022 Fireblade and the 2022 Speed triple have less HP (I know I'm cheating a little here).

Using current mfg's as an example, you could conceivably still run the 2014 EBR as a long-in-the-tooth 2022 model (looking at you BMW S1000r) without any 'architecture' change. BUT (huge butt) it would take engineering by a REAL engineering TEAM, to update the small but common issues, and sweeping upgrades in electronics, to not be laughed right out of the dealership.

Some motorcycles in this crazy hyper sport category are still running manual suspension, but the lack of IMU controlled ABS, ride modes, and better traction control, are absolutely inexcusable. Put the old parts together, sell it as a cheap 'classic' way to go fast for $13k ($15K Carbon Edition), or invest a sunken pirate ships worth of gold doubloons to update the bike with 25 more HP, and pour a ton of electrons over the suspension, cruise, throttle, modes, brakes... I bet it would could still be a contender. It's a safe bet because it was built to battle the Pani V-2 and that pretty much is all Ducati has done to that bike, and it's still stellar today.

BUT! (more big butts) they are STILL battling the publics stigma of the Buell (tm) name. Fool me once, right? IMO, using a different name (i.e. "Melvins") and even with the clarity that they are just assembled EBR's, would foster more trust in the purchase, because as you said...

Quote:

---

Originally Posted by 34nineteen

the motorcycle company that Erik ran into the ground and basically distanced himself from

---

That said, I am just an opinionated keyboard warrior that only knows about running a motorcycle company from what I've read on the internet. Thank you Bill for not sending all the parts to the scrapyard, it's the only way I can keep my beloved EBR in tip top shape. Do you have a water pump seal? all THREE of the "new" ones from that dry dusty warehouse have leaked immediately:upset:

The new Buell may be figuring out its finances too. I'm sure they are still being relatively conservative to make sure the whole thing doesnt turn into a soup sandwich (again).

Even in Eriks case, per the Cycle World article, HD only injected $500k into the company, and was holding Eriks house as collateral. I dont know what Bills investment is into EBR/Buell, but its probably been surviving off of money from LAP and the occasional sold motorcycle. Does anyone know how many motorcycles have been sold under Melvins watch? I can imagine that LAP is being leveraged to provide funding to keep EBR/Buell up and running until it can (hopefully) do it on its own. I also imagine that Bill is keeping enough separation between the two companies, so if Buell does go under again, it wont have creditors trying to take down LAP to get the bill paid. Again, I am speculating here, as I have NO knowledge of how the two companies are aligned/separated.

You're absolutely right about the price of new engine development, that same Cycle World article claims that Harley/Buell owed Rotax "an eight figure sum" for the 1125 engine. I doubt the new Buell is even turning a profit at this point. Maybe Bill and Rotax are working on a V3 motor to be released later. Sometimes a manufacturer needs to create its own customer to buy its product. If Rotax makes a palatable deal for Buell/EBR to provide them motors to sell motorcycles, it could wind up working out mutually beneficial for them in the future.

You know the current sales model for EBR is consumer direct, not through dealers. I think even Erik was trying to get away from the dealership model. Even if they tried to get back into a dealer, its going to be an extremely hard sell, as that bridge was burned twice in fire sales.

Once again, this is all speculation.


Speaking of product development, it is curious to see the new V-4 Panigale was bested by the clapped out 55,000 mile GSXR 1000 in that Revzilla video.

These D-bags should just end this charade and get into the ultra-high-end scope business. Adding Tenderloin!


https://www.youtube.com/watch?v=Fw3ESuZkCig

I really want that cobra scope

Six people. Thats the answer I wanted. It looks like a whole SIX people have the courage to plunk down a whole $25 to reserve a "Brand New" Hammerhead:sorrow:

But you do get a free hat! Hmmm, might be worth that.
https://live.staticflickr.com/65535/...1e079801_c.jpg

I have no idea who Bill Melvin is, but I get your disdain towards several individuals mentioned in previous posts, including the Stark fella. But something you mentioned about engineered designs being outdated by time, I wanted to comment on that. In some design projects the ultimate goal is to have optimized the design for a specific application. This is particularly true for airframe design, kinetic projectiles including bullets and in many cases, reciprocating engine design. Take for example the F-16 airframe that was originally developed by General Dynamics. The fuselage and overall airframe was designed using modern design techniques, including wind tunnel analysis, computational fluid dynamic analysis and many more design capabilities that were becoming available with the advent of computer aided design back in the early 1970s. The Fairchild A-10 "Warthog" is another good example of something that was designed in the 1960s and continues to evolve in relatively minor ways because the original design work was an epic undertaking that cost millions and millions of dollars. The design techniques have not changed as we can call airframe design, regardless of the application today, a "solved problem." In other words, there is no reason to reinvent the wheel. One of the key pieces of technology that has kept these old aircraft relevant in today's world is the avionics. We've got relative supercomputers onboard these aircraft that allow them to continue flying with one or more wings blown completely off the airframe because of the computational power and capability that supports a wide performance and stability envelope. For the intended application, these aircraft are pretty damn optimal and there is, from an operational requirements and engineered optimization perspective, little to nothing to gain in analyzing (read double checking or second guessing) the airframe design today.

The same is true for many highly engineered rounds found in our favorite plinkers, including the .357 Magnum, .45 ACP, 300 Winchester, and countless more. All designed for a specific purpose and little gain to be had by reinvigorating an investigation into the original design. And finally, there's a couple of engines out there that have been designed from the ground up and optimized for a specific application, like Harley-Davidson's Evolution engine in the Sportster and our XBs, the small block Ford V8 series based on the Windsor engine design and countless others, including many highly durable diesel engines. The point I'm making is that just because the Helicon design is "old" doesn't mean that it's really outdated. Sure, there's been advances in direct injection technology that yields ungodly power increases without increasing displacement, there's been a few advances in materials science where modern coatings and more exotic materials could benefit power and durability, but at some point the plug has to be pulled in order to keep a project within budget too. BRP Rotax is one hell of an engineering design firm making some of the most durable and low maintenance engines in arguably the most stringent of industrial applications, aviation. They have a pedigree that dates back several generations that has garnered them one hell of a reputation - that they worked with Eric Buell to design the Helicon engine is something that any Buell motorcycle owner should be proud of as there is a legacy of engineering innovation and design expertise that's not taught in even the best of engineering schools embued in that lump.

Something similar can be said for the Evolution engine design too. I found this British article that I thought was fairly interesting and probably written by someone with an engineering background - it gave me some renewed appreciation for the engine in my XB12. https://www.classicbikehub.uk/Featur...#39;%20-engine

Quote:

---

Originally Posted by Mesozoic

I have no idea who Bill Melvin is,

---

I'm looking forward to your next posting.... "I've have no idea who that Elon Musk guy is, but here is what is wrong with Tesla, and how other companies do it better."

Quote:

---

Originally Posted by Mesozoic

I have no idea who Bill Melvin is...

---

He doesn't matter. He's not an engineer. And neither is their "lead engineer", lol.

But you miss the point. Imagine your A-10 Warthog example:love_heart: that was built in the 60's and the 'same one' today. To an outsider they look the same, they fly the same, they make wonderful brapping noises. BUT it's the differences in materials, construction, and electronics make it a completely different beast and incomparable to the first one built.

How about the .44 mag in Wyatt Earps Peacemaker vs 'the same' .44 mag made today? The engineers at any ammunition supplier would disagree that they are 'the same'

A 1955 Small block Chevy vs LS? Or how about just the first 1997 LS vs a new one? 95% swappable parts, but by FAR not the same engine today 'Vette to 'Vette.

The difference in the 2014 and 2022 V-2 Panigale the EBR was built to complete against is massive. Ya, it looks the same, it rides the same, but the decade of learning applied to the electronics that control it make it a totally different beast.
The difference in a 2014 EBR and a "New Buell" today is ZERO. Nothing. They haven't even addressed the common faults (evap solid, chassis brace) since 2016.

"Engineering" today includes electronics. In materials, construction, assembly, application, and THAT is todays difference. The new Buell is a ghost from the past. A 1955 Corvette with a SBC isn't any slower than it used to be, but it doesn't compare to the same 2022 one. 4 wheels 2 doors, and a NA V-8 don't tell the whole story.

Maybe if Tony Stark made the power plant and upgraded the electronics I would write a check.

Add his riding gear and we would never fear that hairpin again.

Maybe Buells new direction isnt to manufacture a bleeding edge technology bike? Maybe its just building American made bikes that are "good enough". Nothing wrong with that.

I applaud Bill Melvin for stepping up, investing in the company and trying to turn it around. I'm curious to see what the future brings and the future lineup.

Quote:

---

Originally Posted by cvc

Maybe if Tony Stark made the power plant and upgraded the electronics I would write a check.

Add his riding gear and we would never fear that hairpin again.

---

As soon as you get done with those front isolators, hop to it on the Tony Stark power plant (TSPP).

Pretty sure Wyatt Earp shot a single action colt calibered in 45Long Colt

Quote:

---

Originally Posted by 34nineteen

Maybe Buells new direction isnt to manufacture a bleeding edge technology bike? Maybe its just building American made bikes that are "good enough". Nothing wrong with that.

I applaud Bill Melvin for stepping up, investing in the company and trying to turn it around. I'm curious to see what the future brings and the future lineup.

---

Most buyers will never do a track day with their bike. I think the platform is still sound. Even the XB’s were fast enough to kill you in a city block . If the bikes just had comparable electronics including antilock brakes. Then company offered accessories for performance that the end user could add. ( I would pay $1000.00 to $1500.00 for an ABS kit two wheels with Module and lines/hoses ect to retrofit my SS or XT. ). If they could make the price inline with metric bikes with similar performance then the ZTL brakes and the water quenched aluminum casting process for the swing arm and maybe some other unique bits that made the Buells what they were to ride they might have a chance.
On the other hand Cooter’s probably but unfortunately correct they are still trying to sell a 2008-14 model with new trim. For 2022 niche prices.

Quote:

---

Originally Posted by Outlaw

Pretty sure Wyatt Earp shot a single action colt calibered in 45Long Colt

---

Indeed, Josh.

https://www.usatoday.com/story/news/...ction/7868943/

Quote:

---

Originally Posted by Outlaw

Pretty sure Wyatt Earp shot a single action colt calibered in 45Long Colt

---

For a guy that nicknamed himself Outlaw, not surprised you'd know that trivia, haha.

Anyway.... I don't mean to bash the bike itself. I agree it is a phenomenal performer. Matter of fact, I bought it new because it did NOT have the added electronics.

My bitch is the shady used car sales tactics putting a black eye on the bike and the brand that I love.

Wish I'd have gotten one of these when they were still produced.

https://www.youtube.com/watch?v=n-Cj...tusMotorcycles

Guess who bought the remnants of that company.. yep, lap.

180 hp , 125+ ft/lbs torque in a sport/tour bike with pizazzz. What's not to like?

They are now selling that amazing engine to re-power the Polaris SxS with 180hp!!

https://americanv4.com

Quote:

---

Originally Posted by d_adams

Wish I'd have gotten one of these when they were still produced.

https://www.youtube.com/watch?v=n-Cj...tusMotorcycles

Guess who bought the remnants of that company.. yep, lap.

180 hp , 125+ ft/lbs torque in a sport/tour bike with pizazzz. What's not to like?

---

That engine sounds incredible!

The rumor mill says 2 new bikes from Buell will be released in the upcoming days. I'm guessing the adventure bike will be one.

Na. I would LOVE to be wrong but its the same EBR 1190 with the only set of Hammerhead airbox/sides they have, and the Dirtbike with the EBR engine they didn't even make.

Same ol same ol:( 'Generating excitement' cringeworthy buzzword crap. Come see the semi trailer we wrapped!!!!!! Ya ok. I'd rather come see a ROW of Hammerheads, or a prototype ANYTHING.

They did 'leak' the same/only 8-bit 2 tone rendering of the "ADV" they had a 8 grader make for them 2 years ago. Looks like something in GTA2.

Looks like the Melvin advertising budget has enough to buy Roland Sands for at least 50 seconds;)

https://www.youtube.com/watch?v=SpREH-jqnRI

"Analog monster" aka 10 year old tech in your "new" bike.

But at least they kept EBR/Buell alive longer than Erik did.

EBR - Nov 2009-April 2015 - 5 years 5 months
Melvins- Jan 2016 - today (Feb 2024) 8 years +

so talk all the smack you want about Bill Melvin, but he is keeping the name going. Even if at the end of the day, it is just a brand name (I think Erik Buell said that).


Wonder what ever happened to Bruce Belfer?

And Brett Farve should have retired the first time.




"Better to burn out, than fade awaaaaaaaaaaay!!!!!!"