How many miles do you have on the motorcycle after replacing the gaskets. Does it leak again?
Printable View
Just posting so I can find this later.
great write up. :up:
Yes, excellent attention to detail. Anyone on here should have no problem following this write-up. This is inspiring me to finally install the rocker cover gaskets sitting on the work bench in my shop. LOL. Thanks, now I HAVE to rotate the engine :D
Nice write up thanks
I've got the James Gaskets set for the top end. As I understand not all of these gaskets will be used? I'm going to rotate the engine, so what would you recommend to replace since I will be there in addition to the rocker box gaskets replacing? I'm going to replace the rocker box gaskets as it was described in this thread, also I'm going to replace intake manifold gaskets and PCV valves gaskets. Anything else I suppose to do? Would it be a good idea to replace the exhaust pipes gaskets since I have them in the kit or just do not touch the pipes since they have no problems? Should I replace the O2 sensor?
http://www.buellxb.com/forum/attachm...2&d=1477541967
http://www.buellxb.com/forum/attachm...3&d=1477541972
http://www.buellxb.com/forum/attachm...4&d=1477541978
Should I replace the O2 sensor?
yep. they're cheap
Would this be the same kit for a 2008 xb9sx? My rear rocker gasket is also leaking and was planning on doing the repair this winter. Thanks.