I played with plastidip,added rim stripes,installed 50-dro pulley cover,added mad dax's old mirrors and some leds.http://www.buellxb.com/buell_images/...01143353_L.jpghttp://www.buellxb.com/buell_images/...01142815_L.jpg
Printable View
I played with plastidip,added rim stripes,installed 50-dro pulley cover,added mad dax's old mirrors and some leds.http://www.buellxb.com/buell_images/...01143353_L.jpghttp://www.buellxb.com/buell_images/...01142815_L.jpg
looks great
Broke her down looking for my problem, installed the clubmans.
http://a6.sphotos.ak.fbcdn.net/hphot...89917245_o.jpg
http://a4.sphotos.ak.fbcdn.net/hphot...55551803_o.jpg
Sadly the stator is apart right now trying to find my problem and also the throttle cable is to long so i have to wait for my shorter one to come in.
washed it... and got it a new garage buddy, traded my old murray rider for a slightly nicer john deere rider
New plug wires
http://www.buellxb.com/buell_images/...02132212_L.jpg
Now I have to replace the fuel lines and filter with something snazzy.
Loki, i have put the clubman bars on with the long cables and lines. It is a pain to route it but once you get it in the sweet spot everything works fine and i can switch between the two bars in about 15-20 minutes if needed. Anyway, on topic, I renewed the registration on Lizzy and put only 20 miles on her today :( then cleaned the bugs off and brake dust.
Well... I accidentally abused her. She is running so good right now throttle wheelies are a breeze. Unfortunately the last one I came down a little hard and... kerrrtwaaang. I discovered crossroads bars weakness.
http://www.buellxb.com/buell_images/...04114207_L.jpg
http://www.buellxb.com/buell_images/...04114143_L.jpg
I spent a fair amount of time making that dash and would be totally bummed right now if I didn't already have a replacement. Billet2Race machined me one almost identical as what I made but twice as thick. Its all billety goodness and I almost didnt want to powder coat it but eventually everything will be black.
http://www.buellxb.com/buell_images/...04114448_L.jpg
Ouch!!! It's a good thing it didn't come all the way off.
It was flopping around.. I rode home one handed in second the whole way. Luckily less than a mile from home.
got a few parts powder coated, putting them back on today :D
http://i1100.photobucket.com/albums/...3640598203.jpg
http://i1100.photobucket.com/albums/...3640599302.jpg
What she did to me:
http://i446.photobucket.com/albums/q...s/IMG_1674.jpg
Nels
^^^Thats pretty cool right there.
Used company paper and toner to print out all three PDF manuals for my '09 CR. :D
Rode the crap out of mine today. :D
@Loki, any way to make your pics a little bigger ? :p
Rode today, was a balmy 36*f!
@walls, i suppose i could upload them alittle bigger if youd like. :P
She's a little dusty.
I installed a led tail light from EBR and a K&N filter.
http://a6.sphotos.ak.fbcdn.net/hphot...76266705_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-...16572167_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphot...42114028_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-...12185442_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-...51492369_n.jpg
Installed my new tailbag and saddlebags I received in trade for some of my CNC anodized aluminum front and rear axle sliders
I love 'em. Nice and roomy. Looking forward to a long trip with them.
http://www.buellxb.com/buell_images/...10180404_L.jpg
http://www.buellxb.com/buell_images/...10180530_L.jpg
http://www.buellxb.com/buell_images/...10180601_L.jpg
http://www.buellxb.com/buell_images/...10180456_L.jpg
http://www.buellxb.com/buell_images/...10182719_L.jpg
http://www.buellxb.com/buell_images/...10183243_L.jpg
Received the projected cost of the repairs for my bike, it will be ready for pickup on Thursday.
:D
ordered a transparent timing cover from red93stang and the axlesliders from vtech007
Forgot about this thread! I did this the other day, but I changed my oil land mounted up my new plate :D Next step, build up more parts for you guys and get ready for Dragon V next week! :p
http://www.buellxb.com/buell_images/...05235612_L.jpg
5-0dro
www.5-0dro.com
Installed the orange timing cover from 'stang. Got to NC in two days! Pretty good match I must say!
Wiped the whole bike down. Was covered in dust from being on my front porch. Haven't rode in a few weeks cause it hasn't got much out of the 30's. Also tried a new mirror location with my chinese ebay bar end. I think I like ithttp://www.buellxb.com/buell_images/...11100823_L.jpg
http://www.buellxb.com/buell_images/...11100746_L.jpg
That's a nice looking bike you got there!
I took off the antennas and put on a set of bar ends.
There from ebay $54 with super nice quality!
http://sphotos.xx.fbcdn.net/hphotos-...49127284_n.jpg
Thanks manQuote:
That's a nice looking bike you got there!Â*
Rode her 170 miles around some awesome backroads in PA and NJ and passed 16,000 miles!!
I rode it to work, as I have been almost everyday, then when I got home I took off the passenger peg brackets then gave it a good wash.
http://i857.photobucket.com/albums/a...413_173449.jpg
http://i857.photobucket.com/albums/a...413_171629.jpg
I also did this.....
http://i857.photobucket.com/albums/a...413_190426.jpg
New rubber! An EBR Front rotor and Mounting kit! getting ready for dragon V!
had an R1 pull off the road cause he couldnt hack it against a buell :)
Filled my tank and drained it on some twisty roads.
Oh yea... passed the 10,000 mile mark on the odometer.
took her out for a ride...was great like always.:D
Got a plate for my S3 Thunderbolt....
http://www.buellxb.com/buell_images/...13143651_L.jpg
....to match my XB9 Firebolt
http://www.buellxb.com/buell_images/...30105042_L.jpg
http://www.buellxb.com/buell_images/...14000556_L.jpg
my gift to Ole' Blue !
Amsoil & filter.
Ballistic EVO2 16 cell battery
side note for the Buellers in or near Tulsa,OK you can get amsoil & the Ballistic batteries at
the Kinetic Playground at 4207 Peoria, tulsa. they keep them in stock. same price on the battery as on the ballistic website. and when they ask what i ride and I said a Buell Xb12R they did not give me the almost normal crap you hear from hd or import shops/dealerships, in fact they was very happy to help me and Amanda that works there looked everywhere in the shop to see if she could find a gasket for my primary inspection cover.
Went for nice ride today 100+ mile ride today. Stopped by Lancaster Harley and ordered some new plug wires. The 2 guys working the parts counter seemed really happy to be dealing with a Buell rider. The guy I dealt with was Dave, if you are in the area a need a part from a dealer stop and see these guys.
Put an all weather grill cover over it after I finally got it onto post.
Cleaned the oxidation from my wheels and have her well needed deep cleaning:D
finally took BamBam out of the dining room and had our first ride of the season after sitting inside since Nov 14th...
5 months later with nothing more then the occasional trickle charge and he fired right up, rode to the closest gas station and put some good old 89 oct in (thats all we have) and tore it up for an hour!
Stopped for a snack and make sure all was well and BamBam and I tore it up and made our way home...
two wheeled therapy at its best!
:D
http://i43.servimg.com/u/f43/17/23/66/54/p4152510.jpg
http://i43.servimg.com/u/f43/17/23/66/54/p4152512.jpg
http://i43.servimg.com/u/f43/17/23/66/54/p4152513.jpg