I also don't get along with Dunlops. Completely different set-up as compared to Pirelli or Bridgestones. Sidewalls to stiff, no feedback.
Hell of an experiment. I would punt unless you have lots...
Type: Posts; User: outthere
I also don't get along with Dunlops. Completely different set-up as compared to Pirelli or Bridgestones. Sidewalls to stiff, no feedback.
Hell of an experiment. I would punt unless you have lots...
I run the belt fairly loose, so loose in fact if you get on it in the fat part of the power band it skips. I run a gear hi because there's less to think about tryin' to go quick.
Using the...
I can see Buell running circles around an XR1200. I've seen a few wadded up with hotdogs at the controls. No ground clearance.
^^and if you make a steering stem to fit make 2. I would also like one. The worst thing about the Buell front end is the urge to stand the bike up under braking when leaned over.
There are ERB...
I wouldn't worry about an overheated rotor unless you traveling at 'pro-level speeds. Those fellas went through lots of them. Unless you're going to a chain drive set-up top speed is limited. Hard to...
^^^^^^^^^^^^tip of the day
A rotor hone and acetone work wonders. Check runout before replacing.
Same controls I'm using. I have some Woodcrafts here somewhere I'll let go
A freeze plug with a bunch of holes drilled in it will work
+1 somebody keyed the side of our new car a ways back
Great post. Out youngest son was a medic and did 3 tours to the middle East with the Marines. We are one of the fortunate ones he came home.
I use a tune that came with a Drummer on a Deans muffler also. The bike seems to run better using the Drummer vs the Deans and I suspect its a bit rich on top. Wont hit the rev limiter with the Deans...
Best boot & gloves money can buy.
you know, in neutral on the limiter. Idiots.
Take your time and enjoy.
I suppose compressions good? I'm going to say the map's not working with the exhaust your using.
It's not going to power wheelie in any gear but 1st.
^^^^^^^^^never thought of that BAS whatever that is. Looking into it.
A quick shifter for an old guy like me won't work. My foot is highly educated and pushing a button takes all the fun out of...
16680
16681
And a Penske out back. Bikes been fun. Check your fasteners often
16682
Tune a Buell and you can click the box on items not used such as sidestand, lean angle BS. I also removed the key and switch.
You sure as heck don't need a quick shifter on the tracks I ride on....
I'm a treehugger and proud of it.
You guys crack me up.
Ordered fork seals & wipers
This post is worth bookmarking thanks
My idea might cost you three bucks.
No matter what you do it's going to change the tune.
Why don't you find the right size freeze plug and drill some holes in it? Start with on large hole in the center. Then drill smaller holes around the circumferance until you have the sound.
We did...