Search:

Thanks az looks like Newcastle it is. Will run me 37 after shipping not too bad.

After just looking they have a bunch of custom ones no stock used ones

I was hoping for a slightly less price than what they have but if I have to then I have to. Sometimes they are reasonable sometimes not and I think because my bars were straight and not turned in the...

Now I just need the shifter and my brand new pegs will be in Friday and I had the extra mirror since I only run with one and the bike will look better than before.

Luckily and thankfully the bar ends worked wonders cause I really dislike the way frame pucks look. Those bar ends kept if well off the ground. Bout had a heart attack when it started going. All I...

Just looking for a new shift lever with the rubber toe piece in tact and in good shape. The rubber piece on mine has been ripped off since I purchased and yesterday bike tipped over broke off the...

Actually just had to double check manual says 38-42 ft lbs for the cap nut. I know the manual lies about some other torque specs mainly the shift lever pinch bolt that says 16 ft lbs (should be inch...

Not at all they are perfect. The manual calls for that cap at 42 max it just wasn't clear on retorquing it down actually it says they are shot if you get The noise and to replace not once does it...

Hey thanks cooter I got bike all set up on jack and stand and did just as stated except I backed the cap bolt put then went back in to 42 ft lbs to be safe and sure enough no more clunking at least...

I am trying to find the steps for retightening the steering head bearings on bad weather bikers one member states from time to time they should be retightened down or you get a slight clunk that I am...

But I did check warm and its still in the middle so I'm all set

Just the main oil not the primary is what I meant to say. Sorry I haven't been to the site in a few weeks and now its all different

OK so when I did my oil change I added exactly what was called for however I didn't know at the time to check warm so when checking cold its right in the middle of the dipstick and I'm assuming when...

Thanks lunatic. I sprayed a multipurpose pb lube on the belt to test for the squeak and it seems that it is coming from the belt itself only on the front pulley. Seems to be touching the edge of the...

So one fork seal was leaking pretty good after ride. Running down and pooling on bottom of fork. I decided to give seal mate a try and sure enough worked like a charm no leak however I am curious if...

Ecm is sold

http://www.buellxb.com/buell_images/20350_20150620161745_L.jpg
After tinkering with the squeak I have determined it is the belt touching the edge of the sprocket in front. It keeps wandering there...

http://www.buellxb.com/buell_images/20350_20150620122633_L.jpg
This is the culprit if my description was inadequate

So I have to get this noise to stop it seems to of gotten worst after riding for the first time today. Recently had bearings done and put bike together to spec. Now the front pulley/sprocket is...

There ya have it folks ecm is good. 50 bucks plus the 6 for a flat rate box and you got yourself an ecm

Thanks thrst maybe that will help people on the edge of buying it. As stated it came off my bike and worked fine.

I think next time I change tires or remove belt I'm gonna mark the belt and pulley on rear to place in the same spot maybe the noise is from parts of the belt being on different teeth maybe every...

Light is gone ecm is all that's left

It came off my 03 xb9 and was working fine on mine. I'm assuming its a multi application ecm because looking it up pulls Harley Davidson results. I am unsure if the previous owner put this on or came...

I have an ecm that was on my bike when purchased used and I am trying to sell but one problem that was brought up, if it is a problem, is that searching the part number on barcode only lists Harley...