So, how is the new isolator working?
Type: Posts; User: spigatelli
So, how is the new isolator working?
Maybe the right lower control arm bushing.
I got in there to clean up the grounds under the airbox and I found a bare spot on the head temp sensor wire. Hopefully, that was the issue.
Since the wheel bearing thing seems to be caused by too much tension, I wonder if one of these might help...
https://www.freespiritsparts.com/en/buell-xb-belt-tensioner-black.html
I know it isn't...
The whole thing, fully loaded is like 100lbs. I have done a lot of motorcycle camping trips and most of the time, I don't want or need anything aside from what fits in my bags. But when you are...
This was the process to make it fit the Buell. I think it was originally made for an XR650 or something.
It uses a rod through the hollow axle, but the main weight is handled by the bushings on...
I like to go motorcycle camping. I usually do at least 1 trip per year with friends. Some of them don't have good luggage and my wife doesn't have good luggage either (she hates a top box). ...
Both AFV and EGO are at 110%
Thanks for the tips. I have been cleaning grounds and I cleaned the connection for the CPS.
Cleaned all of the battery connections.
This evening, I'll jump into the key switch relay and double...
2006 Ulysses
Recently I went on a trip that was over 300 miles each way. On the way there, I had the bike misfire for a few seconds and I let off the gas and got back on it and I had no other...
I know this is an old post but this is great! I just used this guide to do a top end on the Ulysses. Great write-up!
I bought one of those exhaust stud kits (not the one from above) and it didn't...
https://alloyboltz.com/product/polished-grade-8-stainless-harley-exhaust-stud-kit-4/
Says grade 8. I know it seems like overkill, but I want stainless so it doesn't rust all to hell and I don't know...
Alright. Found the bosch O2 sensor is #12014 and is less than $20. I'll replace the intake seals and the plugs/wires while I have it all apart.
Thanks for the help.
I have an 06 with 33k miles on it. She has a broken exhaust stud on the rear cylinder and I need to rotate the engine to fix it.
I'm putting in new grade 8 stainless studs (w/ anti-seize) and new...
Yeah, I am worried about how it will handle on the street.
Here is the video. Sorry it's on facebook and I couldn't find it on their youtube channel.
...
Someone posted a video on one of the facebook Buell Ulysses groups about using a 120/90/17 (Shinko 705) instead of the 120/70/17 that is standard. The 90 gives you 24mm more sidewall so basically it...
Just did this on my 06 Ulysses. Worked like a champ! Thanks to everyone that posted pictures for me to follow!