I did this last year because I had oil leaking everywhere. The stock gasket im guessing shrunk. If you compare a new one next to the old one there is a huge size difference. Once I replaced the...
Type: Posts; User: taylor
I did this last year because I had oil leaking everywhere. The stock gasket im guessing shrunk. If you compare a new one next to the old one there is a huge size difference. Once I replaced the...
Let us know. Always nice to have options.
My bike last night had glowing headers like this. I have the drummer, K&n, erb ecm. I just emailed EBR to ask what the deal is.
yeah rotating the engine is not easy. It took me hours to pull the header off and put a new one on
I dont think the D&D needs the valve. Just take the cable off and keep it. You may one day want the stock pipe back on. You will have to unhook it from under the airbox.
I have a 2008 and yes I have done the TPS reset many times. I might have to send it back agian. I just had to check and see if you guys have had good luck with them. Riding the bike in traffic or at...
I have had the EBR ECU for about a year now and it never wants idle right. (yes it is the correct one for the bike and mods) Anyone have the same issue? Or does anyone think the ECU works perfect?...
I would have spent $400 maybe $500 but no way on $750. So I had to buy the plug and play. I have sent it back 3 times to get it tweaked and only been charged once. It works ok. Atleast I have no more...
Skip the xb9 and get a xb12. Its worth the little extra money.
your out of luck. You can either do tune boy or direct link which may or may not work. Or you can buy a new "plug and play" ECU from erikbuellracing.com which will work better then stock but not...
I have a screaming eagle Vrod and a xb12r. the Vrod is faster top speed but everything else is close. So I imagine the 1125 would kill the Vrod....
thanks. i got an 08. i guess im not going tomess with it. i already have a ebr ecm
I thought ECMSPY was like $100? Am i wrong? I have a extera ecm, if its free I should try it.
way to slow. atleast get the 1200. I had a 1200 and even thought it needed more power.
Oh, thanks for reminder. forgot about it
Any one else had issues with big bore problems? I have been thinking about it for awhile. either big bore or R1.
I did some looking also and could find what the header is. although i do think i have seen one before. btw that slip on is really ugly.
A good friend of mine own's his own mobile dyno. He does many dyno days for free at motorcyle shops around west washington. Keep in mind he will dyno it for free not tune for free. check out his...
any new info glade?
I had a bad rocker gasket also. I had to rotate the motor and buy the gasket for about $30. It took about 4 hours with a bike lift. It was not hardest thing to do with a lift but it did take a little...
I didnt read this whole post but just so you know jardine sells a insert and i have it on my drummer. its a bit small but fits fine. i like it and bike runs good. just a small loss in power but...
I just had this problem because I didnt reset the tps after a k&n air filter. reset that bad boy and see if anything happens.. keep in mind my engine light never came on.
let me know. im west seattle
Take the bike in and make the dealer do it if they will. It really was a lot of work to tilt the motor to put a gasket in. Not hard just a lot of time, and you will need a motorcycle lift.
i had a "leak" also. I had to take the rocker cover off and put a new seal in for the cover. the stock seal was way small conpared to the new one i got. anyways no leaks anymore. problem solved