Search:

I have a new Cometic one if you want it.

"The cheaper the parts, the better buy for the money"
EL-P

Your question is posed like you are questioning the temps being higher than you think they should be. You should know your Buell does not have a radiator and as such will not have the tight temp...

:tongue-new:

Do this from post #2

You can jump the pins in the diagnostic connector if you don't want to wait. Buellmods.com

90* elbow between the header and the mounted can.


It's actually slightly less than that, but theres enough wiggle in the slip joint to make it mount ok.

So have you tested for spark during the issue?

Not starting when cold is a common result of fouled plugs. Buells run a very long, very rich, cold start cycle. Starting it cold and running it for...

Well thats good news:eagerness:

As long as the bike is in good running order now, it will be perfectly fine with the "Buell Race Muffler". Congrats, those are getting harder to find:angel:
It is...

Hot damn thats pretty!

I bought a cheap old Kalawain 17' jet boat in the late 90's with "some old Ford engine" in the back. Funny thing is it would beat up on some pretty well built boats my...

It depends greatly on the circumstances of the loss of ignition, but I've had a rash of corroded right handlebar switches lately. Glad they're still cheap! When it's running wiggle test the red run...

Well you're not gonna like this, but here's the facts.

Throw it away. It can never be as good as what you can do with even the most basic tuning that you can even do for free on a Buell. Thats not...

Fantastic info from Barrett:applause:

What does Twin say about it?

You want a Drummer.

I firmly believe this is why The Buell Boffins TBB(TM) decided on hose clamps to solve the thin metal bolted to a paint shaker problem.

Alternatively you could do what KonaRider posted just above yours... and see if it's a waste of money and time to replace it before you replace it.

Here is a copy of the manual for you to read...

That is the "Speed Based Fan Control" option that can be toggled on or off using a program like ECMSpy, TunerPro, Or ECMDroid. I hate it too. It's noisy, wears out the fan prematurely (and pointless...

You can narrow down the source of the noise by using a long screwdriver with a wooden handle to your ear as a stethoscope.

Wild West Steampunk-ish chain mechanical noise is usually normal. Rythmic...

I have a Barkers pipe and matching ECM for an 1125CR if you're interested;) Similar sound to a Jardine but MUCH higher quality:eagerness:
However, I'd HIGHLY recommend getting the noise sorted first...

It's not homeless. It is "The Way";)
https://live.staticflickr.com/65535/51795328830_99a5ec93ee_c.jpg

Depends where you are in the world, Carmen.

Buellparts, SPHDOnline, NCCR, Twin Motorcycles, even e-Bay.

Chaz at Aagard is super good and worth every stinking penny.

Alternatively our own Barrett on here is well versed in Buell fuel pumps and stocks replacements and re-build kits. A fine option...

Heres a free copy of the service manual:eagerness:

http://buellmods.com/content/downloads/manuals/1125/1125_service_manual.pdf

That link also has a diagnostic manual and electrical manual.
...

OO! Those Honda 'waterfall' pipes do it for me:love_heart: