Search:

Anyone have one for sale?

I say give it a shot... saw a post a while back were an ausi bueller used one for his own style damper mod and said it work as it should. I'll see if I can find it in the sea of forums.

stick with harley batteries. I learned the hard way. went through 3 brands just to figure out the damn factory battery was the best option. I know they are expensive but it still runs strong 3 yrs...

Great.... Just keep up with your maintenance and keep riding. replace things as needed. I never do unnecessary repairs if it doesn't break or isn't do for service.

I see... thanks for the info. when I'm do for another sprocket I'll give that a try.

I did have to chop my pin for the neck lift. about an 1/4 of an inch. it was kinda binding when taking the stand out from the front. but a quick cut off wheel job and all is perfect.

that's about what I want to achieve. My wife is going to be riding my firebolt mostly so I'm looking for good highway gearing for her. Wonder how much diff. your tranny is from stock. Is it setup for...

I run the t-rex stands front and rear. the t-rex front stand gives you two options for the front. 1st is lifting by the bottom forks and the other lifts from the neck of the frame. great stands for...

I run a 48 rear and 21 front. I'm sitting about 3600rpm @70mph. Just wanna see if any chain setups are running any better highway gearing?

I would look into the fuel pump next. Since adding a fuel additive fixes it temporarily. I would steer there if it were my bike.

there is no wool inside of the buell race pipe. It's just baffles and tubes. The buell race pipes are not very loud at all. When I had mine it was very quite. Just a tad bit louder than stock....

That would be awesome if we had that here in texas but all of our gas is laced with 10% corn crap.

When I had drag bars on my lightning I had to mod the front windscreen bracket to relieve the binding on the cable. I never snapped a cable but I saw the bind and noticed a little drag on the cable...

I have seen crystals form in the tank and clog the fuel pump. The fuel pump would starve as the fuel level would get between half full and empty. Took the fuel pump out, cleaned the tank out as much...

the airbox sound. Seems like your interactive exhuast valve for the exhaust is having some issues. it's supposed to open as your throttle position opens to allow more flow. then close while not at...

CCA's are not enough for the buell. You need at least 300. That's what the OEM HD Battery cranks.

I just bought the HD Battery. I know it stings to pay that much for it but you could check ebay if you don't have to have it right away. I tried to find a cheaper one and bought a few different...

When I had the pulsating rotor problem. I ordered new hardware and rotor. After that all the problems went away and have never come back since. Send EBR a messege and see if they have any other...

http://i1355.photobucket.com/albums/q707/wrnglrx/buell/20130731_172830_zpsa9f20f8a.jpg

Just finished up my SCG rear shock install on my 05 bolt. didn't slip the front forks down just to see how she handled. Have to say I'm really liking the current setup. Not gonna slip the front...

A good way to see if you don't have any crystalize formations in your tank from this crappy corn fuel additive is to see if the problem goes away with a full tank of gas and as you get closer to...

Had the same problem with mine back in the day. New HD battery solved the problem. DON'T buy the yuasa replacements neither. just save the time and headache and fork over the 100+ bucks and get and...

By the way congrats and NICE ride. Always loved the black suite buells.

I would wait on the open airbox mod until you get a race ecm. if you put an exhaust. You should be fine with the computer being able to accommodate that mod. But with an open air box I know for a...

it's been awhile for me as well. Try changing the extension to a .txt file and see if it can see it then.