On my Ulysses the green is the rear. At least that's the way I hooked it up after doing the intake seals and riding 50 miles with no surging...FINALLY...
Type: Posts; User: Feequess
On my Ulysses the green is the rear. At least that's the way I hooked it up after doing the intake seals and riding 50 miles with no surging...FINALLY...
Thanks, mrlogix. I'm running a MB Air and it has no RAM so I'm trying to not load it up with programs. I process photos and video (when I'm not near my real computer) and it's already crawling. I...
I think I'm getting closer. After buttoning up the wiring harness, I still have a problem with the ECM Spy connecting. On a whim, I took a meter to the cable. It ain't right. When I wiggle it,...
Thanks, lowkey. For an old guy I do pretty well in the digital world, but it helps to have friends who are ITs and feedback from a board like this.
Hope to put together the harness tomorrow then will start playing with the EMC Spy. When I first looked into the EMC Spy I'd read it was Windows only. So, I scored an older Dell with Win7 Pro from...
Thanks, guys. Once the harness is buttoned up, that's the next thing to make work correctly.
About the harness: On both the black and the red wires where they split one into two, they were broken...
Well, I had my turn signals quit and decided to put on my big girl panties and tear into the wiring harness. Amazingly easy...once I figured out to remove the headlight assembly. We'll see if this...
I will give that a try and report back. Thanks.
I use Macs (let the hatred flow...) so I'm readjusting. I was wondering if there was firewall/antivirus/whatever that needs to be dealt with. I...
Did it all as correctly as I can see. Made the donation, got a Windows (7 pro) machine, got the cable. Now, every time I try to do something with ECMSpy, I get Checksum Error. After restarting the...
Julia, greetings from the middle of the Willamette Valley in Oregon. My sister and a few of my favorite customers are dealing with MS. For as debilitating as the disease is, the strength and...
I did 150 miles the other day with no problems. The thing I wanna know, LunaticFringe, is how the hell did you figure it was the kill switch? I don't see the connection between that and the speedo....
It could be even simpler than new clutch plates, the PO might have used the wrong oil in the primary. You said the engine oil looked bad, but did you change out the primary? Start with the stupid...
$60, and will pay for shipping within the lower 48 to 97333.
Just did about 100 miles on the bike and no speedo failures. My Spidy-Sense is telling me it was in the kill switch. So far, so good. Thanks LunaticFringe. However, since wiring up the muffler valve...
1-spray a good dryer/cleaner/luber such as kano kroil in the right switchgear housing and work the run/off switch back &forth.
Used contact cleaner, then followed up with WD-40.
2-check battery...
...I hit the engine kill switch for just a moment, let it restart by rolling, then the speedo comes back and the CEL stays on for a second then goes out and all is fine for an hour, or the rest of...
My XB12X did this. The PO had backed out the fork damper screws all the way out to make the suspension softer. I turned both lower and upper all the way in. No more clunking. Backed out the screws a...
When I started ripping into the harness, I got the feeling I was going to more damage than good. Remembering there's a broken wire in there, I resolved to dive in. But, I remembered in a conversation...
According to the skeematic, I'm supposed to have 12 v at pin #2 on the cluster plug. No voltage.
http://www.buellxb.com/buell_images/20001_20150114152933_L.jpg
Since there is voltage at the...
Thanks. On it. Film at 11:00.
Continuing the saga: The battery has checked out fine. I looked at the schematic and it looks like there is supposed to be constant power, 12v, to the cluster even when the switch is off. It seems...
Thanks for the feedback. The battery is over 12 volts after a week of sitting. But, I'll pull it out and have it load-tested. I'm gonna search four wire bundle and start there. Thanks again.
Hi there. Recently acquired a Buell and am wondering why it took so long to combine my love of American V-Twins, speed, and decent handling. Anywho... Not totally mechanically or electrically...