Search:

Thanks DamMechanic for the Props. Had the same experience with 2 VR's on my 09 Uly, as well as replaced a stator. TheWood, I am doing due diligence to make sure everything is good. The pictures do...

Hello Barrett, I do not know anyone named TEABAG? Do I need to know that person?
I started this thread for VR recommendations and have appreciated the very helpful and great information provided by...

I have 2 Ulys: an "XP" with appears to be a stock VR, IDS ECM with D&D exhaust, and a stock "X" with an IDS for stock exhaust & Shindengen VR mounted in the scoop.
Checked the the parasitic draw on...

Jack at roadstercycles I believe guarantees it is authentic. In my experience/opinion, which is about 3 days and 300 miles, an OE VR is now a sub-standard part.

34nineteen thanks for the input. Air flow is not a problem for the R/R or the rear cylinder. Fan actually runs a lot less.
Barrett this Shindengen V/R/R in the last 2 days I have ran it has been...

Yes I have a RH Scoop. The R/R is only 1.5" thick, with over 3/4" risers underneath it. The pic doesn't show it, but there is plenty of air space above it as well.
Here is a better pic.15917

Finally installed the new R/R, relocated to the left side scoop.15915

Wow, this is more motivation to relocate VR. I ride some pretty bad roads. Thanks for posting this and glad you were able to resolve it quickly. Hopefully show how resilient the FH020AA is, or is not?

Thanks TheWood, very cool. Wonder what happens if you bottom out, especially a Uly? He says in the video the mounting bolts go through metal, does the shell need to be grounded? I asked Jack that...

Just purchased the DIY Kit from Roadster cycle with the FH020AA R/R. Since it is recommended to have it directly connected to the battery, has anybody relocated one? possibly inside the airbox?
The...

Thank You DamMechanic. VR at the link is sold out as well as many others. Probably going to buy the Roadstercycle DIY kit, at least I know what brand and model it is. Thanks again.

Thanks for the info. Anybody ever tried the twinmotorcycle VR? http://https://www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&aid=23244&cid=0&s=voltage%20regulator&a=
Seems pretty complete, not sure...

There are a few options, seems like oem are hard to get? MOSFET? Stock looking after market? etc.... 09 Uly

Will be interesting to see where this short is?

Praise the Lord! Thank You Cooter.

Well, I was not looking for much more than what the original poster was asking for in this thread.

Thanks Cooter. Is there any known issues with using Buelltooth and ECMDroid/ECMSPY to make exhaust valve changes as shown in the ECMSpy Userguide? These are the changes I have made to a stock ECM...

cterry66, was recently trying to understand why the stock tune with a stock muffler was performing so poorly?
The very last sentence of the ECMSPY Guide for the "Exhaust Valve Settings" says:...

Thank You for the info Cooter and Barret on how to properly test this without running the motor. Will check for historical codes before I leave work.

I do have ECMDroid and Buelltooth. Is ECMSPY...

Ok, I have stopped now.

Compared to this Operation?

How does this look to you?

Your right Barrett, we should buy American. What are the brands of Lithium batteries made in America? After briefly searching it appears most lithiums are made in China.

In Store mode the battery is float charged between %60(13.13v) and %80(13.3v) of a fully charged battery15756.
Unfortunately I have been using the "Charge" mode only, which charges the battery to...

Do you use store mode on the Shorai charger?