What year bike are they from? How many miles?
I'd be interested in them for $200 shipped.... Let me know.
Thanks,
Orlando
Type: Posts; User: Lando
What year bike are they from? How many miles?
I'd be interested in them for $200 shipped.... Let me know.
Thanks,
Orlando
Update... Started tearing into the bike yesterday, found the bolts that hold down the coil were completely loose, the coil was moving around. Re-tightened and put some locktite. Also added a ground...
Careful with what you use on the frame. I had gas/oil stains on my frame, tried cleaning, ended up fading the powder coat.
But my mistake was I used a rag that previously had been used with metal...
There is also someone in my neighborhood that rides a cherry xbs 09 or 2010 that I can't seem to ever flag down when he passes my house cuz I'm in the middle of something. And a few blocks away, once...
Hey, I'm still around... And both my brothers also. I have a transluacent orange 08 12scg, my brothers have a blue trans 09 12scg and a red 09 1125cr. I'm still in Milford, they are in Middletown. We...
I've checked all easily visible grounds. Is there an electrical diagram somewhere I can reference? Anything hidden or somewhere I wouldn't think of? A list of locations?
Thanks.
OK, i've been having some issues for a long time now where my bike (08 XB12SCG) randomly dies mid cruise for just a second or two and then comes back to life. Doesn't matter speed, but seems to...
Completely agree... Just wishful thinking for the future. One day Erik will make a retro model, and I hope he has the funds by then to do an air cooled. Might only happen for the 50th aniversary...
I would say that if it started and drove to the gas station fine, then after terming it off, it wouldn't restart, and is now found to be at 4 volts, you most likely have a bad stator which was not...
I thought I heard somewhere that EBR has plans to release a cafe-racer in the future... That would be a good reason to develop/source a air cooled motor.
I love my xb because of the character the...
BMW just released another air cooled model, the NineT, if they can do it, so can EBR.
If gtp falls through, I'm interested.
If EBR doesn't announce the 1190SX soon, another model to watch out for is the BMW R NineT
Ericz, Josh662234, HamishMC, Vance580, Johnnyd, Wifarmboy, Williegoat, John422, Bossanova, 1Badtitan90, Pur pony, Ali, Big twin.
So I finally got a TPS and changed it out. Put in new intake manifold seals while I was there even though the stock ones seemed fine. I used a TPS from autozone, Duralast part # TPS4129 $75
Initial...
Damnit, why must you taunt me with these low prices and trade options???
I feel like you have an awsome deal, but I'm just not willing to spend the money.
Good luck with sale, I'm surprised...
Ehhh, ECM seems fine as far as I can tell. I've ordered a TPS so we'll see what happens.
I would sugest you do some thorough research on powder coating aluminum wheels and the effects caused by the heat cycle of the process. There are many people that have done it and will say its fine,...
Will do... Thanks!
Also, anyone know if those part numbers are the right ones?
Lando
great, I'm starting to get that feeling like I'm going to spend all summer troubleshooting instead of riding.....
Anyway, can someone confirm i have the right part numbers?
08-10 Throttle...
Ok, so i finally had some time and went to check if there were any codes.
No active codes, but there were 2 codes in memory - code 11 (Throttle Position Sensor) and code 44 (Bank Angle Sensor)
...
Maybe, but why would the bike run fine when cold?
The fuel pump ( chafed wires) is on my list of possible causes but way down the list.
Ok, bad news, i wasn't the crank position sensor. That will be up for sale soon.
Now the problem is even worst than before.
I installed the new crank position sensor and started her up. All...
So, does anybody know? Before I go buying a cable.....
Does ecmspy work on Macs?