Starting to put the bike back together. New charging rotor, plugs, cam finger follower, EBR clutch actuator and a handful of other parts. I was soooo excited to have my bike back together that I...
Type: Posts; User: pdksh
Starting to put the bike back together. New charging rotor, plugs, cam finger follower, EBR clutch actuator and a handful of other parts. I was soooo excited to have my bike back together that I...
I ordered a hotcams shim kit, should be delivered any day. All my measurements were on the tight end of the spec. The two rear cylinder exhaust were too tight. I called the local HD stealer with the...
Thx for the tip
I have a “snake” of extensions and universals that I use for the spark plugs on the XB. I’ll try the hose trick.
Question about shims. I can’t see any number, stamp or color...
poking away at the girl, unfortunately I'm not the first hack on this bike. Little things like the starter solenoid cover and other little wire tie down bits are missing. Can anyone tell me if the...
Excellent pics, working right now with EBR to order a modified rotor
Ugh! The clutch slave cylinder was “dry” when I checked the bike out and remained dry for a month. Found a little puddle of DOT4 on the floor.
Question! Oberton slave kit or EBR slave kit?...
Yes! Save 200 to spend 2000. Lol thank You
EXACTLY, Right! Unfortunately the 2009/2010 1125 motor had a known stator charging issue. The only permanent fix is a 0.30” hole drilled through the flywheel’s hub. The hole is an orfice to spray oil...
I hate being told NO! The more people tell me I can't do something, the more I need to prove them WRONG! This is probably why I ride Buells. When someone questions why I have one, I go out and buy...
Thank You for your response
Started poking around my CR and just finished verifying the PO was a little relaxed with the upkeep of this bike. The motorcycle is charging fine but it has the HD wire harness installed. I'm not too...