Bikes back with a new kickstand and a new stand switch. She's running like she was before the kickstand issue. Thank you for your help and the part numbers as well. Appreciate yall.
Type: Posts; User: MMARVINxb9
Bikes back with a new kickstand and a new stand switch. She's running like she was before the kickstand issue. Thank you for your help and the part numbers as well. Appreciate yall.
Awesome, just ordered everything I appreciate you and will give an update when it's all done!!
Awesome, thank you so much. Should I still try to tighten the stand because it's pretty wobbly.
I have a 2003 buell xb9r. I was riding yesterday into the beautiful watkins glen and on my way back my bike kept cutting off, completely lost power. The engine light comes on and I pulled over. Put...
bikes back fellas just a friendly update. Front tire needed to be cleaned the needle was very dirty from my understanding...weird, and I will be purchasing the speed sensor myself and just put it on....
awesome thank you so much definitely something to think and look into what size is your tire now? probably looks sexy asf
update: bike will be going into the shop this coming Wednesday, got a slow leak in the front tire and would also like a tune up. Need a few other things done that I cannot do myself before my season...
just curious if anyone has ever purchased one of these or something close to it, I normally use a wrench-off oil filter
...
and yes the tacho does work
thanks guys ill report back with my findings!!
Looking to see if anyone has a part number for a 2003 buell xb9r speed sensor. I hit a pothole last year and it stopped working. Mph doesn't move and the mileage doesn't increase. I will start there...
bike is back, like I said when I put it on I put it to tight which caused is to malfunction. bought a new one with gaskets took it to my mechanic and he did all the work It's running well now.
Alright so mechanic called me this morning and told me I need another new clutch cable, I put it on too tight and caused too much tension and it snapped inside. So a new clucth cable and gasket...
its in the shop right now ill let you know what they tell me
Yeah I quite today I feel like I'm doing everything on repeat so I'm done. I've got a mechanic lined up thanks fellas !!
Now when you say adjust the primary chain, in the trasnmission6 I'm assuming?
I took the two bolts off nothing looks broken, this did happen while I was riding. The original clutch just snapped off at the lever. So I ordered a new one.
There's the video, I did put it in first gear while the bike was off and it still rolled which isn't normal ik that much
https://youtu.be/CdPHge_02Rc
When I shift into gear when the bike is on...ease off the clutch there's that noise and it's doesn't move I can shift it just doesn't move.
I will post a video later
ok its a new York thing I guess...what I did
1. Put my cycle on a stand.
2. Moved the gear shift lever out of the way.
3. Loosened the clutch cable so the clutch lever has no tension.
4. ...
I'm looking at the other thread as well I take it it's just an adjusting thing. I've adjusting about 3 times now I just have to get it right. Going back and forth is a little frustrating.
Ok so I followed the steps on the manual, adjusted the tension so it's about a dimes space. Went into the gasket turned it counterclockwise and 1/4 turn clockwise. Put it back on. Pulled the clutch a...
Isn't there a video to adjust the clutch, in the gasket I mean. I just installed mine and it makes a VVVVVVVVvV noise in first and doesn't move in second is it too tight!?