I agree with the lever problem. It happened to me after I put aftermarket leavers on. The brake locks up when they get hot and the pads expand. I just filed the levers and the problem went away.
Type: Posts; User: willyam1
I agree with the lever problem. It happened to me after I put aftermarket leavers on. The brake locks up when they get hot and the pads expand. I just filed the levers and the problem went away.
Do you have turn signals?
I will take the Rear turn signals if you have them.
I will take the blinkers. Pm sent.
I have the pilot powers and do about the same type of riding that you described. I think that they work great. I have almost 5,000 miles on both the front and rear and expect them to last another...
Sounds like an electrical problem. Check all your connections and grounds. I have experienced a lot of weird problems when my battery terminal was loose. Mine also died on me at about 60. When your...
Scorpion Stinger Gloves
http://www.pinkgorillacycles.com/apparel/gloves/scorpion-stinger-gloves-motorcycle-gloves
You can get + and - off the flasher. The flasher has three prongs +,-,and one that blinks positive. Just splice the wires coming right out of the flasher plug. They only have power when the key is...
Ive done that before. Not on my bike but on a different project. Couldn't see the screw head so when it kept turning and turning I assumed it was striped. Started breaking things before I finally...
dahkgb is right. Depending on how far you want to ride or drive to work, it is cheaper outside of anchorage. The drive isn't that long though. 30 min maybe more depending on traffic and weather....
I'm in Anchorage too. Definitely bring your bike. What kind of job did you get?
Thanks, I think I will go with whatever one I can get the cheapest.
As far as I understand it was diffrent for a few years. The buell filter did not use oil.
http://www.buellxb.com/buell_images/5853_20110316121343_L.jpg
The part number on the Buell filter is 29388-02YB. Does anyone have this filter?
I Have a 05 xb9r with a Jardine and Race maps. I want to put in a high performance filter. I am was wondering which filter you guys think is better. I can still get the Buell pro-series race filter...
2005 Xb9r
When I got my bike the guy just used cheep stuff if he changed it at all. I replaced it with Amsoil 20/50 and it runs great. It shifts a lot better with amsoil. No problems with the clutch or...
Stang, I sure hope so. After i played around with ECMSPY it felt like a completely different bike, and that was with no packing in it. Really looking forward to it.
Are you using Amsoil 80w95 in the primary case? I am using amsoil 20w50 in the engine and the primary. I am not sure if I should use thicker oil in the primary because I will be starting the bike in...
Just repacked mine today. I have had the bike for one season and it looks like the person before me never repacked it. There was no packing left at all. I am looking forward to the snow melting so I...
You should be carful loading the eeprom to you bike. If the firmware isn't right or if some of EEPROM setting are wrong you might run into more problems. All you need to do is load the race EEPROM...
I did it not too long ago. It is not hard. Kinda hard to explain. Just take the old one off and put the new on the same way. Set the clutch up the way the manual says. I would explain it to you but I...
yeah Post a pic. It should be real obvious if it is stock. I have most afternoons off and almost always sunday. What works for you guys.
Nice to meet you. I am from anchorage too. I ride a yellow 05 xb9r. We should put a ride together.
yeah. Got mine at napa.