like 34:19 said, get a buelltooth dongle and ECMDroid app. Unless you're leaving stuff out, you seem to be jumping around and throwing parts at an issue without knowing what it is (ask me how I...
Type: Posts; User: RidetheLightning
like 34:19 said, get a buelltooth dongle and ECMDroid app. Unless you're leaving stuff out, you seem to be jumping around and throwing parts at an issue without knowing what it is (ask me how I...
True, definitely not trying to guess here, just seeing if there's other sources. Worst case I pay 160 to replace the one I "borrow" from you ;)
I'm trying to find a replacement cam position sensor, timing sensor, ignition pickup, etc. I used Twin motorcycles and got the following, but it tubers and 03 XB, so I'm pretty sure it's not actually...
Which bearings are you looking at? I was thinking of getting a set to replace mine when I get new tires this year, but couldn't find consistent reviews for guidance.
So got a new battery in and idled/revved great up to 5k rpm, then revs died, backfired and engine died eventually. Voltage was between 13.5 and 14 the entire time, and power loss was abrupt at...
14984
Ordered a new Deka battery, hoping it was an anomaly, or due to intermittent use of the battery tender. I read someone saying that if you use a tender it should always be connected, so maybe that was...
Looks like the first part I'm throwing at it is a battery. Bike wouldn't start last night so took it to local o'reilly to get charged/tested (which I had already done about a week ago after the...
Thanks for bringing me back. I keep moving around but have been leaving out some things that I checked and forgot to mention along the way. When I took the bike around the neighborhood the second...
It's an 07. So I was reading about the trouble code in the 08 electrical system diagnostics manual. After reading more, it sounds like this code means cam sync failure in the earlier models. I'm...
After doing some digging on old threads it sounds like the crankshaft position sensor may be the issue, and symptoms sound similar to mine. My bike has had a slight hiccup under hard acceleration at...
Fired it back up in the driveway, and was able to immediately replicate the issue the second revs got above 4k. Backfired a couple times then died. Threw a code 56 - sync failure this time. No other...
Ah, right. Forgot my map re-set that masking I had previously switched. They are current. There were no codes before the ride.
Alright so took it out again with new plugs, TPS reset and re-loaded map. Ran perfectly smooth and strong...right up until 4k rpm again. It wasn't as severe, but did cough, eventually backfire, and...
Yeah I have an open airbox K&N w/ Jardine RT1, and buelltooth map for it. It had previously been dead on at around 100.7 I think before it all went to hell when my fuel pump died. Pretty sure...
Good call on putting dielectric grease in the boot. I just put a little on the top of the plug and I'm sure most of it came off when I used the fuel line to help thread it in. I'm sure I have those...
Just realized I never said, but I checked it and it was 83.5% before I re-loaded my map. Got the new plugs in except I'm still struggling to get the boot back on the rear plug. Any tricks would be...
hooked up to ECMdroid lat night and had a battery voltage code. Got my battery tested then charged. Re-loaded my fuel map, reset TPS, and adjusted the clutch cable (something I've been meaning to do...
Yeah that's what I was hoping. Was saving the new plugs for when I rotate the engine but may drop em in sooner just to rule it out.
I've re-installed my rebuilt fuel pump assembly with new pump, and after priming the bike fired up and idled great. Didn't have time for a ride after that, so it sat a couple days. Fired it up...
PM'd on stock inner airbox cover.
In one of the fb groups I saw someone posting pictures of new EBR bikes getting built and taking orders. I haven't followed EBR, but I thought they were all closed up. Maybe someone bough the rights...
Go here and read/print:
https://www.buellxb.com/forum/showthread.php?23933-Buell-XB-Buyers-Guide
$3,500-$4,000 seems fair for a pretty clean one, and this looks clean at first glance. It...
I think it's safe to say you'd have some interest, but 50 seems like a pretty big order for an untested part that MUST perform as well as stock, and is not the simplest to replace.
I would not be dismayed at 30k mileage, and you'll only know the state of the motor by taking it out. I would feel pretty awful selling it in such as state as well, not that you would get $2,800 for...