Good to know, I値l look into it. Thanks
Type: Posts; User: DSophia
Good to know, I値l look into it. Thanks
Thanks, definitely in love with the bike. I may send the injectors off to be cleaned. The very top of the throttle still stumbles a bit. Has anyone ever cleared these injectors with an ultrasonic...
Fixed!
Was a blockage in the fuel line between fuel pump and injectors. Took all of ten minutes.
Thanks again, I値l get it ordered. Finally have some time this evening to tear into it.
Thank you all for your time. I知 running through the fuel system and it seems to be the lines after the fuel pump. Probably injectors too. There痴 definitely a learning curve on these bikes, sorry to...
Definitely fuel pump or filter related then? Anything else to check out first? The previous owner said he had replaced the pump not long before I bought it...
How is the EGO Correction adjusted?
EGO Correction is 145%
I’m researching what that means...
Can I check this with the buelltooth? Which section? I can check when I get home tonight.
It has good torque and runs smooth up to that 40% throttle area and will run 70 mph without missing a lick. It’s only when I twist past 40% that it wants to die.
Installed a brand new TPS, no change. The fuel mixture is definitely effected past 40% since the engine wants to die instead of leveling off, right? Would the oxygen sensor effect the fuel mixture...
Thanks a million!
Thank you for the input, I will slow down and check everything. I値l admit, it痴 a lot more exciting to get lucky than it is to be thorough. 😂
It is behaving very strangely. Feels like something...
I have a spare ECM I put in as well. Same problem. It’s throwing codes 13 and 15.I checked voltage on the O2 sensor. It hit .97v once it warmed up with a little throttle, is this normal on these...
Buelltooth finally arrived. Im still learning my way around it but so far everything looks normal. The voltages and TPD rise and fall smoothly. I replaced the TDS and did a reset. Bike still cuts out...
Yeah, I really only used it to do static timing and reset the TPS. I saw there was a lot of scary functionality in the program. Thanks again
You are by far the funniest guy I’ve met on here so far. I can tell which college you decided to attend. Thanks for all the info.
I see there is a version 2 module that is in stock. Can anyone tell me if this is worth the money if I致e already got the ECM cable and ecmspy set up? I am unfamiliar. Thanks
I知 having trouble finding a BuellTooth module, the site that carries them is sold out. Any leads on where to get one?
I’m not excited to break it apart to do any work, but would be nice to have an extra set of parts for $500. I’d just like to know it’s worth the investment. I’ve owned very efficient and powerful...
Sorry, I have left out some info. They fuel pump, and plugs were recently replaced. After I bought the bike I found that the oil was overfilled by about a quart. I have an ecm cable and have dabbled...
Thanks for the quick reply. I have new info to help diagnose. I just drove it a few miles to make sure it was getting clean fuel and realized it would rev well above 3500 as long as the throttle...
Hello all! I知 the proud new owner of a 2005 XB9SX. I fell in love with it immediately. Unfortunately it came with an issue. When accelerating the revs stop at 3000-3500rpm. I致e reset TPS, static...