Search:

Not trying to be a Richard Cranium but what is a verifiable fluid type?
There has been some great advice here on just backing off the primary chain tension just as a test. If you open up the...

So my Uly has Touratech pannier racks and boxes big enough to swallow two full face helmets and jackets. That is great on multi day rides but it’s overkill for most.

Under the seat I carry...

As a fyi I did ask Twin about jacking the bike by the muffler like the stock. The reply was only to get the rear end up which is a no brainer. I like the looks and sound of their pipe though. Just...

Just a fyi on the James site it looks like the number is JGI-25352-00-KF but what has me concerned is that it also says it fits the Blast. In the picture it is one bolt hole off from fitting.

I...

Thanks Barrett!!! James is the brand I was thinking of.

Thanks for the offer Cooter but I ordered some oem gaskets. I just like how some of the Jim’s gaskets have the red bead of sealant. I normally buy parts from StPaul but I thought $45 for shipping was...

Does anyone know the part number for a Jim’s primary cover gasket set? And who how has a good source for them?

Just because Seattle has a statue from Russia of Joesph Stalin and the people elected self proclaimed communist doesn’t mean; oh never mind, your right ��.

Sometimes good meaning teasing comes across pointed in text.

Nade, even in the US, St. Paul’s shipping rate is expensive. You might see if the shipping rate is the same if you buy multiple gaskets. If so then you could sell the rest down there and get your...

How about a general location of where the bike is located at?

Have you put oil in the swing arm since you got the bike in October?

Have you tried leaving the dipstick out while the bike is running? You should see oil circulating in the swing arm.

Does...

Well I found me a Race Exhaust that had some curb rash or something. Rounded up some rubber expansion plugs so I could pressurize it and added some heat and got it back close enough to the original...

I would like a Race muffler but I think it would be easier to find a pot of gold under a rainbow. The Drummer I had was on my first Uly, so I don’t have it anymore. Micron system I would like to find...

Is there an existing thread that I missed somewhere?

Does anyone have one here in the states? How do you like it? And was shipping any problems?
I watched some videos and I like the sound and the looks. I had a Drummer before it it was too loud for...

The one I got was from Dennis Kirk. Here a pick of the difference in the wiring and the mount I made. 1593115932

Thanks Tbone for keeping a cool head!!

I’m on my second 08 Uly. My first Uly, the VR died at 16k miles and replaced with a aftermarket and never had a problem again. On my current 08 Uly the VR...

I purchased that from Twins back in August and it was $169 shipped to the US.
It didn’t come with that VR that is pictured but with one like this:...

I’ve had coils fail just like that in the past. Should be able to do a ohm’s check to see if it’s in range. You could also test with one of those adjustable spark gap tools you plug into the spark...

I just bought my newest Uly in July this year with only 8000 miles on it also. 500 miles later and two burned out head lights I pulled the the VR and it was cooked on the back. I bought a Mofset...

Wonder why they don’t work on the Uly?

Most years I would agreed with the weather comment but not this year. Smoking hot summer summer this year and seen 110 degrees at my house in the shade. Still funny comment though.

If I have time tomorrow I’ll give them a call just to see what they say. I wouldn’t care if it was an old belt I was throwing under the seat.

So I ordered a new belt and other items from St. Paul Harley. I open the box and immediately see that the new belt has been twisted into a small circle along with a piece of paperwork from Falcon SPC...